BRESSER MikroCam PRO HDMI Autofocus

The BRESSER MikroCam Pro HDMI delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11'' HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card with high resolution (up to 5 MP). The Sony Sensor gives excellent image quality. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI 5MP upgrades your existing trinokular microscope to a fully equipped digital measuring microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the stored on SD card. Software included in the following languages (for further image analysis - no direct PC connection via USB provided)EnglishGermanFrenchPolishRussianTurkishIndonesianJapaneseChinese (simplified)Chinesisch (traditional) The software includes numerous functions for image processingmeasurement function* (with live image): distance, angle, surface area (polygon, circle, ellipsoid)Image Stacking from video filesHDR (high dynamic range)fluorescence microscopy: fluorophore data for common dyes can be found in the softwareBatch save *for the use of the included measurement functionality a object micrometer slide is necessary, e.g. BRESSER item no. 5916720 (1/10mm and 1/100mm) or 5916710 (1/100mm). FEATURESHDMI-connection on a monitor or TVbrilliant full HD images via HDMI (60 frames / sec) or WiFi (up to 25 frames / sec)measure specimens via on screen display - no PC necessaryWDR (wide dynamic range) function included SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2” plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or Ritchey–Chrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter