Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER MikroCam mini Full HD HDMI microscope camera

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and the direct path to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.

Service Portal

Guides & Tips

FAQ - Frequently Asked Questions

For this application we recommend the BRESSER Erudit DLX 40-1000x microscope in combination with a USB camera, e.g. the BRESSER MikroCam 1.3 MP. This solution offers better image quality and flexibility than a simple LCD microscope.

If you want to identify bacteria, it is usually more useful to create a culture. Microscopes are generally only sufficient to determine whether the bacteria are, for example, spherical or rod-shaped.
The Barlow lens is already installed in the eyepiece tube on many devices. It can be pulled out at the upper ridge to use the zoom function.
Possible causes:
 
  • Sample too thick / unsuitable: Use thin samples or fixed smears.
  • No cover glass or incorrect thickness: Objectives are optimized for cover glasses.
  • Condenser incorrectly adjusted: Do not open the diaphragm too far – otherwise contrast will be low.
  • Magnification too high: Rule of thumb: maximum 1000 × objective aperture. Example: With a 40x objective with aperture 0.65, the limit is about 650x.

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • DANGER! This device contains electronic components powered by a power source (power supply and/or batteries). Never leave children unsupervised when handling the device! The device should only be used as described in the manual, otherwise, there is a RISK OF ELECTRICAL SHOCK!
  • In case of defects, contact your retailer or the manufacturer.
  • Disconnect damaged devices from the power supply or do not put them back into operation.
  • Small parts can be swallowed. Keep small parts out of reach of children, allow children to work with the device only under supervision.
  • Keep packaging materials away from children. There is a risk of suffocation.
  • Lay network or USB cables securely. There is a risk of tripping or property damage.
Skip product gallery

Accessories

%
BRESSER reduction lens 0.5x fix
The BRESSER 0.5x reducing lens is designed to enlarge the image from a microscope camera. It increases the light intensity and therefore reduces the exposure time. In the case of trinocular microscopes, the adapter usually enables the focus to be matched to the focus of the eyepiece.It is compatible with focusers with a 23.2 mm receptacle. This adapter is specially designed for cameras with sensor sizes of 1/2'' or 1/3''. The connection is made via a 1'' C-mount thread. FEATURES:C-mount threadMicroscope connector: 23.2 mmMagnification factor: 0.5x DELIVERY CONTENT:0.5x reduction lens (fixed)

Available

£58.65* £61.99* (5.39% saved)
%
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

Available

£113.52* £113.99* (0.41% saved)
%
BRESSER Reduction lens 0.75x variable
The BRESSER 0.75x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 2/3". The connection is made via 1 " C-mount thread.

Available

£113.52* £113.99* (0.41% saved)
%
BRESSER Reduction lens 1x variable
The BRESSER reduction lens 1x variable is used to shift the focal point of the camera. The image section of the camera can also be varied slightly. Especially for trinocular microscopes, the adapter enables the camera focus to be adapted to the eyepiece focus. It is compatible with eyepiece pull-outs with 23.2 mm plug-in socket. This adapter is specially designed for cameras with sensor sizes of 1''. The connection is made via a 1'' C-Mount thread. This adapter is especially recommended for the MikroCamII 20 MP (Art.-No. 5914200). FEATURES For cameras with 1'' C-mount thread Especially for cameras with 1'' CMOS sensor For adjusting the focus position For 23.2 mm plug-in receptacles SCOPE OF DELIVERY 1x reduction optics

Available

£122.03* £122.99* (0.78% saved)
%
BRESSER HDMI Full HD Display (13.3") for MikroCam Pro
The Full HD display is the ideal addition to the BRESSER MikroCam Pro HDMI and MINI HDMI.The display can be mounted directly on the camera using an adjustable bracket. It provides brilliant images without artefacts, as the display has the same resolution as the output image of the camera. With the MikroCam and HDMI display set, almost any trinocular microscope with a camera connection can be upgraded to a digital microscope. This means that observations can be made independently of a PC. The size of the display has been optimised so that the microscope user can microscope as usual and view the image on the monitor at the same time. The display provides optimum image quality with a large viewing angle of 178°! This means that several people can view the image without any loss of quality. The image from the microscope camera is always displayed on the HDMI screen without delay and with a high refresh rate of 60 FPS. The quality of the image displayed using an HDMI microscope camera on an HDMI monitor is therefore usually better than when using a USB camera on a laptop or PC. This is particularly advantageous when delicate work is done under microscopic control. Many users also benefit from the improved ergonomics when the image can be viewed on the HDMI display. Higher magnifications with their high numerical aperture are particularly unpleasant for users with eye problems such as mouches volantes (vitreous opacities). Digital viewing can provide a remedy here. The display can be operated with the same power supply unit as the camera using the enclosed Y-cable. A suitable, short, angled HDMI cable is also included to avoid cable clutter in the workplace. Mounting on a MikroCam PRO or MINI is carried out using two screws. Screws and tools are included in the scope of delivery. FEATURES 16:9 Full HD monitor with a resolution of 1920 x 1080 pixels Active area: 16.5 x 29.4 cm Easy mounting directly on a MikroCam PRO or MINI Wide viewing angle (178°) No separate power supply unit required SCOPE OF DELIVERY 13.3" display HDMI cable Y-cable for power supply via camera power supply unit Mounting screws (2 pieces) Allen (hex) key Instruction manual

Available

£355.60* £355.99* (0.11% saved)
%
BRESSER Camera adapter 23.2mm / c-mount
This adapter is intended to connect a MikroCam or other c-mount camera with the microscope. It fits microscopes with a 23.2mm trinocular tube (e.g. Advance ICD, Researcher Trino), or eyepiece tube with the same diameter (e.g. Erudit DLX, Researcher Bino).This adapter is already included with the MikroCam SP and MikroCamII series. It might be a useful addition to the MikroCam Pro HDMI series, if the microscope does not come with a direct c-mount connection.This adapter is also suitable for c- or cs-mount cameras of other brands and suppliers.

Pre-order

£9.46* £12.99* (27.17% saved)
%
BRESSER Microscope Photo Adapter 30.5mm / C-Mount
The BRESSER Photo Adapter 30.5 mm / C-Mount is designed to establish a connection between the 0.5x Reducing lens (Art.-No. 5914005) and the C-Mount MikroCam Adapter (Art.-No. 5942101). Thus a larger image field as well as a higher light intensity can be achieved with a MikroCam. FEATURESC-Mount Female ThreadPlug-in Mount: 23.2 mmSuitable for 30.5 mm Eyepiece Holder SCOPE OF DELIVERYPhoto Adapter 30.5 mm / C-Mount

Available

£14.19* £16.99* (16.48% saved)
%
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

Available

£56.76* £59.99* (5.38% saved)
%
BRESSER Blank Slide with 1/100 mm scale
Blank slides with 1/100 mm scale for your microscope are meant for calibration of measurements. They are used together with eyepiece micrometers or a measuring software (for cameras) to measure samples. This slide is suitable for biological microscopes or reflected light microscopes with high magnification (e.g. metallurgical microscopes). The scale is made by metal deposition on the glass surface of a standard (1x3 inch or 26x76mm) glass slide.The slide is suitable for the calibration of the MikroCamLabII imaging software.SCOPE OF DELIVERY1x Blank Slide with 1/100 mm scaleplastic box for storage

Available

£37.84* £37.99* (0.39% saved)
Skip product gallery

Customers also bought

%
BRESSER Camera adapter 23.2mm / c-mount
This adapter is intended to connect a MikroCam or other c-mount camera with the microscope. It fits microscopes with a 23.2mm trinocular tube (e.g. Advance ICD, Researcher Trino), or eyepiece tube with the same diameter (e.g. Erudit DLX, Researcher Bino).This adapter is already included with the MikroCam SP and MikroCamII series. It might be a useful addition to the MikroCam Pro HDMI series, if the microscope does not come with a direct c-mount connection.This adapter is also suitable for c- or cs-mount cameras of other brands and suppliers.

Pre-order

£9.46* £12.99* (27.17% saved)
%
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

Available

£113.52* £113.99* (0.41% saved)
%
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

Available

£56.76* £59.99* (5.38% saved)
%
BRESSER Darkfield Condenser dry (Infinity/TFM)
The BRESSER dark field condenser dry (Infitiy/TFM) directs the light to the side of the specimen. It increases the contrast of the specimen considerably, especially with highly transparent specimens. This type of illumination makes the observed object appear bright, against an almost black background. In this way, structures can be detected that are hardly visible in the bright field. The dark field condenser dry (Infitiy/TFM) is suitable for lenses that do not require oil immersion. FEATURES Contrast increase intensification of colors Details that are hardly visible in the brightfield can be recognized much better Suitable for lenses without oil immersion The condenser is compatible with the following BRESSER microscopes:5750900 Science TFM-3015760700 Science Infinity SCOPE OF DELIVERY 1x Dark Field Condenser

Pre-order

£193.93* £198.99* (2.54% saved)
%
BRESSER Science Infinity Microscope
The New BRESSER Science Infinity is the new top of the range of the biology microscope series by BRESSER. It is based on infinitely corrected planachromatic objective lenses with superb image quality. Because of the modern design and optics the installation of accessories is very simple and one has many options. The WF 10x eyepieces offer a large visual field of 22mm and are also suitable for spectacle wearers. For protection purposes the eyepieces are rubber coated. The interpupillary distance can be adjusted from ca. 55mm to 75mm. Dioptre adjustments are possible with both eyepieces.The bright and durable LED illumination is dimmable and also very practical for darkfield microscopy*.The Full Köhler illumination is adjustable with the built-in luminous-field diaphragm and the vertically and horizontally adjustable Abbe condenser (numerical aperture 1.25, with iris diaphragm). An imprint of the different possible magnifications on the condenser makes the adjustment of the iris diaphragm very fast and precise.Coaxial pinions drive the stage and focus which enables ergonomic operation of the microscope.The trinocular tube enables the direct attachment of a c-mount camera or MikroCam.SCOPE OF DELIVERYMicroscope with integrated LED illuminationplanachromatic objectives, infinity corrected (4x, 10x, 40x, 100x oil)2x eyepieces (WF 10x)Mains adapterManualImmersion oilDust cover*only with optional accessories

Available

£1,039.65* £1,049.99* (0.98% saved)
%
BRESSER Blank Slides/Cover Plates 50/100 pieces
The set slides / cover plates is use to make Preparations for biological microscopes. The slide holds the preparation it will be covered with a cover plate.SCOPE OF DELIVERY50 blank slides 76x26mm100 cover plates (0,17mm thickness)These BRESSER slides and cover glasses are compatible with the following BRESSER microscopes:Duolux (5012000)BioDiscover (5013000)BIORIT (5101000)Erudit DLX (5102000)ERUDIT MO (5110000)Researcher Bino (5722100)Researcher Trinocular (5723100)LCD microscope (5201000, 5201002)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)

Available

£8.51* £9.99* (14.81% saved)
Skip product gallery

Customers also viewed

%
BRESSER Reduction lens 0.5x variable
The BRESSER 0.5x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 1/2 " or 1/3". The connection is made via 1 " C-mount thread. FEATURES For cameras with 1" c-mount thread To adjust the image field For 23.2 mm eyepiece holders SCOPE OF DELIVERYReduction lens 0.5x variable

Available

£113.52* £113.99* (0.41% saved)
%
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

Available

£56.76* £59.99* (5.38% saved)
BRESSER Universal Smartphone Adapter Deluxe
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

Available

£14.90*
%
BRESSER plan achromatic objective lens 100x
BRESSER Planachromat 100x - this DIN-Objectives are processed with the highest quality materials to enhance the image replication.Plan correction minimizes refocus between center and edge of field and is especially useful for imaging.Fits to the following models:Erudit DLX (5102000, 5102060)Researcher Bino (5722100)Researcher Trino(5723100)Science TRM 301 (5760100)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Not recommended for models Erudit Basic Mono and Bino (5102100, 5102200) and Erudit MO (5110000) as those have a different parfocal length.Immersion Oil not included.SCOPE OF DELIVERYplan achromatic objective lens 100x

Available

£197.71* £203.99* (3.08% saved)
%
MikroCam PRO HDMI camera 5MP
The BRESSER MikroCam Pro HDMI delivers excellent image quality with ease of use. The microscopic image is transferred in Full HD resolution and without delay to a HDMI monitor or TV screen. An optional 11'' HDMI screen is available under item code 5914110 and can be mounted on the camera directly. It gives brilliant images with high contrast. Microscope images and video can now be stored on a SD card with high resolution (up to 5 MP). The Sony Sensor gives excellent image quality. The camera can be controlled with the included USB mouse directly through the on screen display. The on screen functionality now includes a measuring function as well, so the MikroCam Pro HDMI 5MP upgrades your existing trinokular microscope to a fully equipped digital measuring microscope. With the WiFi module, the camera can also supply the images in a wireless network. Due to this, a permanent connection to a PC via USB is not provided. But the professional software MikroCamLabII is still included with the camera for further image analysis after transferring the stored on SD card. Software included in the following languages (for further image analysis - no direct PC connection via USB provided)EnglishGermanFrenchPolishRussianTurkishIndonesianJapaneseChinese (simplified)Chinesisch (traditional) The software includes numerous functions for image processingmeasurement function* (with live image): distance, angle, surface area (polygon, circle, ellipsoid)Image Stacking from video filesHDR (high dynamic range)fluorescence microscopy: fluorophore data for common dyes can be found in the softwareBatch save *for the use of the included measurement functionality a object micrometer slide is necessary, e.g. BRESSER item no. 5916720 (1/10mm and 1/100mm) or 5916710 (1/100mm). FEATURESHDMI-connection on a monitor or TVbrilliant full HD images via HDMI (60 frames / sec) or WiFi (up to 25 frames / sec)measure specimens via on screen display - no PC necessaryWDR (wide dynamic range) function included SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 2.0 SCOPE OF DELIVERYMikroCam Pro HDMI with C-MountAC adapterMouseHDMI cableWiFi dongleSoftware (CD-ROM)

Available

£983.84* £1,002.99* (1.91% saved)
%
BRESSER Reduction lens 0.75x variable
The BRESSER 0.75x reduction lens is used to change the image field of a microscope camera. Itallows to zoom in or out. The brightness becomes more intensive, to reduce the exposure time.For trinocular microscopes the adapter allows to adjust the focus to get the same focus for every eyepiece. It is compatible with 23.2 mm eyepiece holders. This adapter is designed for cameras with sensor sizes from 2/3". The connection is made via 1 " C-mount thread.

Available

£113.52* £113.99* (0.41% saved)