BRESSER Micro Motion Head MH-100 (Polar-Wedge)

Optical polar finder for fast and precise polar alignment of the BRESSER StarTracker Astrophoto Mount PM-100 art.no. 4964120. The BRESSER polar finder scope allows a very precise alignment to the celestial pole by using the illuminated crosshair and constellation markings. Simply adjust the StarTracker astrophoto mount using the tilt head or ball head in the pole height and azimuth until the constellation markings in the polar finder match the constellations in the sky - done. Ideal for optimizing tracking accuracy in astrophotography. FEATURES Optical pole finder scope with illumination To optimize the polar alignment Suitable for StarTracker Astrophoto Mount PM-100Illuminated crosshairs and constellation markings Field of view 6,5° degreesQuick and easy to use SCOPE OF DELIVERYPolar finder scopeMounting material Instruction manual  

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual

​The BRESSER EQ-3 is a German equatorial telescope mount that can be used universally for light to medium-weight telescope tubes with a net weight of up to 5 kg.The only requirement for telescope tube mounting is a universal Vixen profile GP dovetail mounting bar - found on many commercially available telescope. This high-quality equatorial mount allows easy alignment to the celestial pole in no time and then allows tracking of all celestial objects manually with its single RA axis. Both RA and DEC axes come with manual slow motion control cables, for easy adjustment of your telescope's pointing.  Also included is a sturdy, yet lightweight, aluminium field tripod, which can be individually adjusted in leg height to give you perfect stability, even on rough ground. The included 1.5 kg counterweight is used to adjust the balance between the telescope tube and the mount.  Further counterweights can be supplied if needed. NOTE: If you want automatic Right Ascension tracking of celestial targets, this telescope mount can be equipped with the optional motor set Art. 4951400.FEATURESGerman equatorial telescope mountFor light to medium-weight telescope tubes of up to 5 kg net weightUniversal Vixen GP-style dovetail holderEasy polar alignment with adjustable altitude and azimuth axesAllows convenient tracking by slow motion right ascension axisWhat's IncludedBRESSER EQ-3 mountField tripodCounterweight 

BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results. One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past. Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best. You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: http://www.touptek.com/download/showdownload.php?lang=en&id=2Download INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbase SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS02000KPA color Sensor: SONY IMX290 CMOS color, backlit Image and video size: Full HD 1936 x 1096 pixels (video 15 FPS) Native sensor size in pixels: 1936 x 1096 Exposure times: 66µs to 16min Binning: YES, 2x2 Megapixel: 2.1 MP Sensor size in mm: 5.6 x 3.1 Pixel size: 2.9 µm x 2.9 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 "(31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM driver included Field of view for different focal lengths in mm (given in arc minutes): 400mm - 48.2 'x 27.3' 500 mm - 38.6 'x 21.8' 600 mm - 32.1 'x 18.2' 700 mm - 27.5 'x 15.6' 800 mm - 24.1 'x 13.6' 900 mm - 21.4 'x 12.1' 1000 mm - 19.3 'x 10.9' 1250 mm - 15.4 'x 8.7' 1500 mm - 12.9 'x 7.3' 1750 mm - 11.0 'x 6.2' 2000 mm - 9.6 'x 5.5' SCOPE OF DELIEVERY Full HD camera C-mount adapter USB 2.0 PC connection cable with a length of 200cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

THE PMC-EIGHT GOTO SYSTEM JUST AWARDED A SKY AND TELESCOPE HOT PRODUCT FOR 2018. The Explore Scientific EXOS2-GT with PMC-8 Electronics is quite unique and special. Most of the serious amateur mounts on the market today offer single processors. The PMC-8 electronics are extremely robust. They include a 2-Channel Multi-Processor Micro-controller with 8 CPUs that run independently and are completely deterministic in their behavior, thus the name PMC-8. Within this multi-processor system is a 64 Kbyte EEPROM Non-Volatile Memory bank used to store parameters; a Wireless Ethernet 10/100 with full IP function which permits operation from anywhere using a browser, ASCOM, or APP over the web or serial port; and Non-Volatile Memory used to store user selected parameters. The electronics also includes an Auto-Guide port (ST4 contact input) and features the only wireless ASCOM driver on the market. The belt driven system uses 2 timing pulleys (1-45 groove and 1-10 groove) with fiberglass re-enforced neoprene belt connected to a Nema11 bi-polar stepper .67 amps 12ncm motor then connected to the worm. Precise ball bearings in both axes ensures minimal backlash at all nine possible tracking speeds. The included battery pack (12 V) takes eight size "D" batteries. The head rests on a very tough and rigid stainless steel tripod with adjustable 2" legs from 26.8" to 42.5" and can support up to 28 lbs. of equipment. This system is all controlled from a tablet, notebook or desktop pc with 7" display and WIN8.1, WIN10+11, iOS or Android 4.4 with a beautiful full graphical user interface using our very own ExploreStars OpenGoto® Software. The ExploreStars OpenGoto® Software has the same basic functions as most all other mounts on the market today. ExploreStars is a free App downloadable from the Microsoft App store and GooglePlay. The basic download includes a standard 2 star or 3 star alignment procedure, over 70,000 star database, the Messier Catalog and Solar System objects. The software interface features a Classic four-button pattern for guiding, centering, moving and slewing on the touch screen of your tablet or phone. Pull-down menus open to offer the intuitive 2 star and 3 star alignment procedure, selection of the various catalogs, guided tours, the sync button, the park position, search feature and the coordinate input screen to enter RA and DEC coordinate information. Numerical key pad allows for selectable and user enterable GOTO speeds for slewing, centering and guiding rates. You can also set sidereal, king, lunar, solar, and user defined tracking rates. What makes this software different is that YOU can write your own code and import it into this software. Create a Messier challenge. Create a selectable list of objects you want to photograph and program that information into the software. With the ability to write your own code, you can create whatever your heart desires. Share it with the community of astronomers that are using this software. In addition, this mount can be controlled by any ASCOM compliant software using the built-in wireless ASCOM driver. GPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phone.Here are most of the ASCOM software packages available for use with the Explore Scientific / Losmandy G-11 with PMC-8 mount: ACP; APT; AST / ATC & Ricerca (Omega Lab); AstroArt; AstroMB; Cartes du Ciel / Sky Chart; CCD AutoPilot; DeepSky; Deepsky Planner; DFM Engineering; Earth Centered Universe Pro; EasySky; Eye and Telescope; Project Pluto; Hallo Northern Sky; Maxim DL; MaxPoint; PinPoint Astrometric; Prism; Sequence Generator Pro; Sidereal Technology; The Sky; SkyMap Software; SkyTools 3; Star Atlas PRO; Sky Observer; StarryNight; Stellarium; Virtual Moon Atlas; and WorldWide Telescope.VIDEO REVIEW:https://youtu.be/tmNPajsd9H4 IMPORTANT NOTE: To start using ExploreStars app, download the free app and download the celestial data set that contains the astronomical catalogs, reference images, and reference text. Simply by unzipping the ExploreStars folder containing the expanded celestial data set into your Pictures directory, you will expand the native database from a thousand objects to over seventy thousand objects.SOFTWARE DOWNLOAD: https://explorescientificusa.com/pages/software-and-downloads-for-pmc-eight-systemFEATURESUnique PMC-8 Open Goto SystemBeautiful full graphical user interface using our very own ExploreStars OpenGotoWifi controlled by Tablet, Notebook or Desktop PC with 7" or larger display, and Wifi function (not included)Needed system software of optional computer or tablet: WIN8.1, WIN10/11, iOS or Android 4.4 or higherClassic four-button pattern and joystick for guiding, centering, moving and slewing on the touch screenIntuitive 2 star and 3 star alignment procedureMultiprocessor Micro Controller with 8 CPU´sMicro-Stepper Motors NEMA-11Highly accurate and silent Belt-Drive System ST-4 compatible autoguider portASCOM Driver available: YES, supports also Pulse-GuidingYOU can write your own code and import it into this softwareGPS-compatible and auto time / date settings are dependent on optional receiver on computer, tablet or phoneSCOPE OF DELIVERYExplore Scientific EXOS2-GT with Open GOTO PMC-8Stainless steel tripod with 2" legs and bubble levelCounter weight 2 x 4,5 kg Polefinder with illumination unitPower supply 12 volts / 2,0 ampereExploreStars Software via downloadIMPORTANT NOTE: This package doesn´t include any WINDOWS/iOS/Android Computer or Tablet.FAQ / KNOWLEDGE-BASE:  https://explorescientificusa.com/pages/explore-scientific-knowledge-base-and-faqsPMC-Eight GROUPS:  https://espmc-eight.groups.io/g/MAIN

Do you already own a photo camera and would like to create impressive pictures of the night sky with the help of the long exposure or even make time-lapse pictures with little effort ? The BRESSER StarTracker Astronomical PhotoMount PM-100 is the ideal base. Not only for beginners in astrophotography, this mount is particularly well suited, but also the experts swear by a compact and easy-to-use mount to automatically compensate for the natural rotation of the earth. The built-in tracking motor rotates the saddle-mounted camera precisely against the earth's rotation and thus the stars remain in pinpoint shape even with long exposures. If you already own a sturdy photo tripod with a video tilt head you can use the photo mount's head directly with the 1/4 inch & 3/8 inch photo thread holes. The pole height (latitude) is then adjusted by the video tilt head. The photo-mount with tripod with carry-case and polar wedge are also available as a bundle - Product No.: 4964120 Which cameras are basically suitable for use with the BRESSER photo mount ? All cameras with ¼ inch (6.3mm) tripod connection thread and bulb length" B "for long exposure are suitable. The BRESSER StarTracker Astronomical Photo Mount PM-100 is designed for a camera with lens of max. 2.0 kg total weight to carry and track in polar mode. In Azimut mode also a camera weight up to 5.0kg is possible.  Large aperture, wide-angle lenses are ideal for the beginning, because the requirements for tracking accuracy accumulate with increasing focal length and exposure time. Thus, a shot with wide-angle lens can be exposed for up to several minutes and the stars remain punctiform without problems. For example, with a 200mm telephoto lens the polar alignment of the photo mount must be exactly right. But thanks to the integrated pole finder tunnel, this is done quickly. After setting up the light and compact StarTracker Photo Mount, simply set the approximate latitude (pole height) and aim Polaris through the integrated pole finder tunnel. Then mount the camera with the photo lens using the quick-release plate on the supplied ball head. With the ball head, the camera can be aligned and determined at any time on any section of the sky. As soon as the tracking motor is switched on, long-time exposure can be started immediately. This does not even take 5 minutes ... The tracking is carried out by a precise stepper motor, which can be controlled by an easy digital setup on LCD screen. Low power consumption allows up to 20 hours of operation with just one battery charge or simply use the micro USB port for an unlimited power supply. FEATURES Equatorial StarTracker Photo-Mount Automatic siderial tracking against the Earth rotation  Different tracking speed setting possible Suitable for northern and southern henisphere Time lapse: from 15 minutes to 48 hours Ballhead with quick release saddle plate and 1/4" Photo thread for Kamera mountingPhoto-Mount with 1/4" threaded bolt for ballhead mounting Additional quick release coupling for ball head removal High precision stepper motor with helical gear for accurate tracking Clear LCD screen and easy setup menu Battery operation 4 x AA batteries or mico USB (optional acc.)  Battery life: up to 20 hours Weight Photo-Mont: 0.63kg Load capacity of Photo-Mount: up to 2.0kg/5.0kg (EQ/AZ) Optional Acc: Polar-wedge, Tripod and carry-case, optical pole finder scope with illumination unit SCOPE OF DELIVERY StarTracker astronomical Photo-Mount head Ballhead with quick release saddle plate User manual