Please note that our minimum order value is £50
Go to homepage
£0.00

BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)

Skip image gallery
Refurbished
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)
BRESSER Messier MCX-102 GoTo Telescope EQ/AZ (Refurbished)

MCX-102 GoTo Telescope

  • Universal and compact entry-level telescope with GoTo for night and solar observation
  • High-resolution and proven BRESSER Maksutov-Cassegrain optics
  • Proven Goto control for navigation in the starry sky
  • Computer hand box with very large and illuminated display
  • Sturdy stainless steel tripod with polar wedge (AZ+EQ)
  • Can also be used without a tripod as a table-top unit
  • LED red dot finder, BRESSER Super Plössl eyepiece 26mm (1.25"), Smartphone holder, aperture solar-filter and instruction manual included

£480.50*

% £775.00* (38% saved)

Prices include VAT. Shipping costs not included

Currently unavailable

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Privacy
Product number: R13107
Former product no.: R4701102
Note: Our item numbers have been updated. You can continue to search for products using either the previous or the new item number.
EAN: 4007922028323
WEEE-Reg.-Nr.: DE 34323861

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • Check the solar filter before every solar observation and ensure that it is not damaged. Hold it against a strong light source to detect any possible cracks and/or holes. Do not use the telescope for solar observation, even if the solar filter is only slightly damaged. In this case, contact the manufacturer for the appropriate replacement parts.
  • Always use the included solar filter when observing the sun. Make sure it is correctly attached to the telescope according to the instructions. The use of the solar filter is only intended in connection with this telescope.
  • Never look at the sun through an eyepiece/telescope without a certified protection filter. A moon filter can never be used for solar observation. The moon filter is only suitable for moon observation. The solar filter must be mounted in front of the telescope opening, not at the eyepiece. Otherwise, the concentrated light beam through the optics will immediately destroy the filter foil, leading to severe eye damage, including permanent blindness.
  • Check the secure fit of the solar filter before each solar observation. An accidental detachment from the objective opening can lead to immediate and permanent eye damage and blindness.
  • If the solar filter cannot be securely attached to the tube, improve the fit by placing several self-adhesive felt strips or similar between the solar filter and the objective opening. Never use the solar filter if it cannot be properly mounted on the telescope. In such a case, always contact our customer service first.
  • Be extremely cautious when observing the sun. A brief look through the unprotected optics will immediately cause severe eye damage, potentially leading to complete blindness.
  • Children should not look at the sun through the telescope, even with the filter properly installed. Never leave children unsupervised.
  • Never leave the optics unattended. Children and inexperienced adults could point the telescope at the sun without proper precautions and lose their eyesight.
  • Do not observe the sun after eye surgeries or other eye conditions without prior medical consultation.
  • Wrinkles/creases in the film are normal and do not indicate a product defect.
  • Do not expose the device to high temperatures.
  • BATTERY WARNING AND SAFETY Safe handling and use of batteries and accumulators Read and follow these instructions before using the battery or accumulator. To the extent permitted by law, failure to comply with these warnings and instructions may result in any damage caused to your product not being covered by the warranty. In this document, the term "batteries" also includes accumulators. Follow these instructions to ensure optimal safety and performance: DO NOT use counterfeit batteries in products. Only use supplied batteries. Use the battery SOLELY for its intended purpose. Keep batteries out of the reach of children and pets. DO NOT use batteries that appear to be damaged, swollen, or modified. Do not use batteries that are leaking, emitting a smell, swollen, melted, or showing dents, rust, cracks, or scratches. The battery should NOT be disassembled, crushed, punctured, shredded, or otherwise tampered with. The battery should NOT be exposed to liquids. Liquid may penetrate the battery's circuits, causing corrosion and compromising its safety. A wet or damp battery should NOT be dried with a device or heat source (e.g., hairdryer or microwave). The device or battery should NOT be placed near a heat source or direct sunlight. High temperatures can cause the battery to swell, leak, or malfunction. Examples include placing the device near a radiator, stove, kitchen appliance, iron, fireplace, or inside a vehicle or next to a window in direct sunlight. The battery should NOT come into contact with metal objects. If metal objects such as jewelry come into prolonged contact with the battery terminals, the battery may become very hot or catch fire. The battery should NOT be stored together with hazardous or flammable materials. Store the battery in a cool, dry, and well-ventilated area. The battery should NOT be inserted incorrectly when charging. MAKE SURE the battery compartment is empty, dry, and free of dirt before inserting the battery. The battery should NOT be charged in direct sunlight or at extreme temperatures. The battery must be charged at room temperature, typically between 20 °C and 26 °C (68 °F-79 °F). Charging may be temporarily suspended if the battery temperature exceeds 60 °C (140 °F). If the battery is hot but the temperature is under 60 °C (140 °F), the battery will still charge, but more slowly than usual. Avoid dropping the battery or the product with the battery inside. If dropped onto a hard surface, the battery or product may be damaged. If you suspect the battery might be damaged, replace it. Never leave your mobile hotspot plugged into the power supply for more than 24 hours to charge. Let the battery drain and then recharge it. Keeping your mobile hotspot plugged into a charger without draining the battery can damage the battery/device or affect performance. If a battery shows a significantly shorter runtime than when purchased, it has reached the end of its reasonable lifespan. We recommend replacing it. For optimal results and performance, batteries should be replaced after 12 months or earlier depending on usage. Follow local regulations for the disposal of used batteries. Do not throw the battery into fire or water.
Skip product gallery

Customers also bought

Refurbished
%
BRESSER Dew-Shield for MCX102 GpTo telescopes (Refurbished)
BRESSER Dew-Shield for MCX102 GpTo telescopes (Refurbished)
NOTE: This item is a used or returned product. This means: The item may show slight signs of use and the packaging may differ from the original packaging. Please note that refurbished items generally come with a 12-month warranty.Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches.FEATURESPrevents fogging of the front lensReduces reflections caused by stray lightProtects the front lens of the telescopeUse in humid/cool conditionsSuitable for BRESSER MCX102 Goto telescopesEasy to screw into the telescopic tubeLength: 110mm , weight: 100gSCOPE OF DELIVERYDew cap, 1 piece

Currently unavailable

£14.12* £29.00* (51.31% saved)
Details
BRESSER Full HD Deep-Sky Camera & Guider 1.25"
BRESSER Full HD Deep-Sky Camera & Guider 1.25"
BRESSER Full HD Deep Sky Camera with autoguider: a great camera for different types of astrophotography and for autoguiding. Not only suitable for planets, but also for deep-sky objects such as galaxies, nebulae and star clusters. Dedicated ToupSky Astro Imaging software supports video preview, video recording, video processing, image capture and processing, dark field correction and raw data output. Easy to use, but with professional results.One of the main features of the new backlit SONY IMX290 CMOS sensor is its high light sensitivity, which makes it possible to detect deep-sky objects without active cooling. SONY has increased the quantum efficiency at 533 nm wavelength up to 77%, which is much better than other CMOS sensors have been able to achieve in the past.Connect this camera to a guidescope and attach the camera's built-in ST-4 port, directly to your telescope's equatorial mount guide port and autoguide - using many popular audioguiding programs (PHD, Guidedog and more). Autoguiding enables you to take accurate pictures with long exposure times of several minutes. Thanks to the extra light-sensitive camera, you now always have a suitable guide star to hand, even using short exposure times. An ST-4 protocol connection cable is also included. Simple automatic tracking at its best.You can use this camera with all guiding telescopes, or off-axis guiders that accept a 1.25 " tube, 1.25" filter thread (M28.5x0.6) or C-mount adapter thread (1 "x1 /32").IMPORTANT NOTES:This is not a stand-alone guider camera. You always need a Windows 10/11 computer to take pictures and for autoguiding.The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid).DOWNLOAD PHD2-Guiding: https://openphdguiding.org/DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.htmlDOWNLOAD latest camera software and drivers: https://www.touptek-astro.com/downloadsDownload INDI Driver: https://github.com/indilib/indi-3rdparty/tree/master/indi-toupbaseSPECIFICATIONSCamera type: BRESSER / Touptek GPCMOS02000KPA colorSensor: SONY IMX290 CMOS color, backlitImage and video size: Full HD 1936 x 1096 pixels (video 15 FPS)Native sensor size in pixels: 1936 x 1096Exposure times: 66µs to 16minBinning: YES, 2x2Megapixel: 2.1 MPSensor size in mm: 5.6 x 3.1Pixel size: 2.9 µm x 2.9 µmBit depth: 8/12 switchableST-4 Compatible Autoguider: YESCNC milled housing made of aluminumProtective strap on the camera housingCamera tube diameter: 1.25 "(31.7 mm)Camera connection thread: C-mount + 1.25 "filter threadComputer interface: USB 2.0C-mount extension tube with 1.25 inch filter thread includedNo IR cut filter installedCompatible systems: WINDOWS 10 + 11, Linux, StellaVitaASCOM driver includedField of view for different focal lengths in mm (given in arc minutes):400mm - 48.2 'x 27.3'500 mm - 38.6 'x 21.8'600 mm - 32.1 'x 18.2'700 mm - 27.5 'x 15.6'800 mm - 24.1 'x 13.6'900 mm - 21.4 'x 12.1'1000 mm - 19.3 'x 10.9'1250 mm - 15.4 'x 8.7'1500 mm - 12.9 'x 7.3'1750 mm - 11.0 'x 6.2'2000 mm - 9.6 'x 5.5'SCOPE OF DELIEVERYFull HD cameraC-mount adapterUSB 2.0 PC connection cable with a length of 200cmInterface cable for ST-4 autoguider port with 150cm lengthDust cap for camera tubeSoftware download

Available

£289.00*