BRESSER Messier 8x50 Viewfinder

Universal 60mm viewfinder and guide telescope with a focal length of 250mmExcellent 10x60 viewfinder telescope with removable eyepiece unit and crosshairs with adjustable red illumination. The larger aperture and focal length, provide an even brighter field of view and more accurate tracking due to the higher resolution. The precise helical focuser and the 1.25 inch /31.7mm plug-in connection, as well as the T2 camera connection thread (M42x0.75mm), allow the autoguiding required for long time exposure to obtain a point-shaped star image. It can also be used as a mini travel telescope.High quality 10x60 viewfinder telescope with adjustable crosshair illuminationImage sharpness and viewing characteristics lift this viewfinder well above the level of the usual 10x60 viewfinder scopes. The visible image is bright and crisply sharp. Furthermore, this viewfinder has a very large field of view (FOV) of 6.0 degrees. This makes finding and adjusting objects much easier. The existing scale markings (pitch=0.85 degree) on the crosshair are a good reference for estimating distances, and the open centre markings also make it easier to centre objects precisely. All lens surfaces are protected against weathering by multi-coating and guarantee a bright viewfinder image due to the high light transmission values. The adjustable red LED illumination unit is powered by two LR41 coin batteries. The main lens and the crosshairs can be focused independently of each other, giving you perfect focus for your eyes.Compact tracking unit for autoguidingOne of the main applications for this telescope is the so-called autoguiding. Here the usually larger photo-taking optics are actively corrected by a smaller guiding telescope with a second tracking camera. This means that the mechanical fluctuations in the tracking accuracy, which are present in all astronomical telescope mounts, are measured by the tracking camera and compensated accordingly. This is necessary in order to obtain a point-shaped star image on the astrophotos during long time exposures and to avoid unwanted star trails. For this purpose, the guiding telescope is inserted into the existing viewfinder shoe of the photo-taking optics and aligned parallel. If the existing viewfinder shoe is not compatible, a suitable viewfinder shoe is also included. With the 1.25 inch / 31,7mm plug connection at the rear end or via T2 thread connection (M42x0,75mm), a tracking camera can be mounted afterwards. This is held securely by a brass ring clamp and 3 clamping screws. Please note the required back focus for your tracking camera. The focal plane (backfocus) is approx. 22mm behind the T2 thread. The sensitive focusing on the guiding star is done by a large knurled wheel of the mechanically precise manufactured helical focuser. For easy reproduction of the point of focus, this has a white millimetre scale from 0 to 28mm, which is attached by laser engraving. After the tracking camera has been connected directly or via computer to the telescope mount and the necessary basic settings have been made, the first astrophotos with long time exposure can be taken.Use as mini travel telescopeThis viewfinder and guide telescope can also be used quite simply as a mini travel telescope. With the optional eyepieces, a magnification of 9x to 50x can be achieved. Nearly all eyepieces with a focal length of 5 to 26mm and 1.25 inch/31.7mm plug connection are suitable. Especially recommended are the EXPLORE SCIENTIFIC eyepieces of the 52 degree (Art. 02195xx) and 62 degree (02196xx) LER series. Note: Only straight view use is possible.Metal viewfinder holder and viewfinder shoeThe mount of this viewfinder and guide telescope is completely made of aluminium and is a stable base. The viewfinder mount is suitable for many common types of telescopes, such as EXPLORE SCIENTIFIC, BRESSER MESSIER etc. If the existing viewfinder shoe is not compatible, a matching viewfinder shoe is also included. This can be attached to the telescopic tube by means of four M5 screws. The bore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axis. The six large adjustment screws with non-slip knurling make it easy to align the viewfinder, even with clammy fingers. All adjusting and clamping screws have plastic tips that effectively prevent the viewfinder housing and viewfinder mount from being scratched.FEATURESExcellent 10x60 viewfinder and guiding telescopeCan also be used as mini travel telescopePerfect image sharpness and good viewing comfortFMC Multi-coated lens surfacesLens focal length: 250mmMax. possible camera weight: 550gRemovable eyepiece/cross hair unitCamera connection via 1.25 inch / 31.7mm plug connection or T2 threadT2 thread: M42 x 0,75mmPrecise helical focuser for focusing the visible imageFocuser travel range: 28mmClose focus distance: 3 mLaser engraved millimetre scale from 0 to 28mm on the focuserFocal plane (backfocus) is approx. 22mm behind the T2 threadSeparate focusing of the crosshair at the eyepieceVery large field of view FOV of 6.0 degreesWith adjustable red cross-hair iillumination Scale markings crosshair with 0,85 degree graduationPower supply of illumination unit: coin battery type LR41 (2pcs)Brass ring clamp and 3 clamping screws on the 1.25 inch plug connectionWith optional eyepieces magnifications from 9x to 50x can be achievedSuitable are almost all eyepieces with 1.25 inch/31,7mm shaftMounting of the viewfinder telescope is completely made of aluminiumViewfinder mount with 6 large adjustment screws with knurled head for easy gripFinder shoe suitable for EXPLORE SCIENTIFIC, BRESSER MESSIER etc.Additionally a suitable viewfinder shoe is includedBore distances of the viewfinder shoe are 31.7mm on the longitudinal and transverse axisAdjusting and clamping screws have plastic tipsWHAT'S INCLUDED10x60 viewfinder/guiding telescopeEyepiece unit with crosshairCrosshair illumination unit incl. batteriesViewfinder holder with viewfinder shoeInstruction manual

Enter the world of astrophotography now. With the new BRESSER HD moon and planet camera with ST4 autoguider function. This camera is very good for astrophotography with short exposure times, i.e. for celestial objects like the moon, planets or star clusters. For astrophotography with long exposure times for low light deep sky objects, like galaxies and gas nebulae, we recommend the BRESSER Full HD Deep-Sky Camera (Art. No. 4959050) instead, with it's even higher resolution and sensor sensitivity. Equipped with the new high-sensitivity SONY IMX225 CMOS colour sensor, the BRESSER HD moon and planet camera delivers amazing image results with very short exposure times, even with simple telescope equipment. In addition, this ultra-modern camera can also be used as an autoguider, e.g. to actively track the main imaging device with SLR or CCD astro camera. A universal CMOS colour camera that delivers super-sharp lunar and planetary images in particular. The particularly low noise level of this new chip generation from SONY, ensures an exceptionally high brilliance and no cooling is required. Due to the high native pixel resolution of 1280x980, together with suitable telescopes, very beautiful images of the moon, but also detailed planetary images are possible. The ToupSky pro software included in the scope of delivery not only offers the necessary basic functions for image and video recording, but also many helpful special functions for image post-processing and for setting up the Guider. Functions such as live image display, exposure settings, white balance, dark image capture, stacking, timelapse recordings and much more can be individually configured. Especially the very sophisticated software makes it really easy for you to get started in astrophotography. With the automatic settings, you can produce absolutely presentable results without much prior knowledge. If you wish, simply switch off the automatic settings and gradually venture into the individual professional settings. Connect the camera directly to the ST4 connector of your telescope mount and you have fully automatic tracking control. This makes long exposures of several minutes possible without the stars producing unwanted line marks due to the ever-present synchronisation fluctuations of a telescope mount. A corresponding ST-4 connection cable is even included with the camera. Due to the high light sensitivity of the camera, you will always find a suitable guide star even with very short exposure times. For connection to guide tubes or off-axis guiders, the camera has a 1.25" plug-in sleeve, 1.25" filter thread (M28.5x0.6) and C-mount thread (1 "x1/32"). IMPORTANT NOTES: This is not a stand-alone guider camera. You always need a Windows 10 / 11 computer to take pictures and for autoguiding. The autoguider software is not included. You can use PHD2 Guiding, Guidedog, Metaguide, Guidemaster (freeware) or AstroArt, MaxIm DL (paid). DOWNLOAD PHD2-Guiding: https://openphdguiding.org/ DOWNLOAD GuideDog: http://barkosoftware.com/GuideDog/index.html DOWNLOAD latest camera software and drivers: https://www.touptek-astro.com/downloads SPECIFICATIONS Camera type: BRESSER / Touptek GPCMOS01200KPF color Sensor: SONY IMX225 CMOS colour Image and video size: Full HD 1280 x 960 pixels (video 30-54,4 FPS) Native sensor size in pixels: 1280 x 960 Exposure times: 102ms to 16min Binning: YES, 1x1 and 2x2 Megapixel: 1.2 MP Sensor size in mm: 4.8 x 3.6 Pixel size: 3.75 µm x 3.75 µm Bit depth: 8/12 switchable ST-4 Compatible Autoguider: YES CNC milled housing made of aluminum Protective strap on the camera housing Camera tube diameter: 1.25 inch (31.7 mm) Camera connection thread: C-mount + 1.25 "filter thread Computer interface: USB 2.0 C-mount extension tube with 1.25 inch filter thread included No IR cut filter installed Operating system: WINDOWS 10 + 11 ASCOM and WDM driver included Field of view for different focal lengths in mm (given in arc minutes): 400 mm - 41,2'x 30,9' 500 mm - 33'x 24,7' 600 mm - 27,5'x 20,6' 700 mm - 23,5'x 17,7' 800 mm - 20,6'x 15,4' 900 mm - 18,3'x 13,7' 1000 mm - 16,5'x 12,4' 1250 mm - 13,2'x 9,9' 1500 mm - 11'x 8,2' 1750 mm - 9,4'x 7,1' 2000 mm - 8,2'x 6,2' SCOPE OF DELIEVRY HD camera C-mount adapter USB 2.0 PC connection cable with a length of 180cm Interface cable for ST-4 autoguider port with 150cm length Dust cap for camera tube Software CD

SPEZIAL ASTRO SF 15x70 binoculars from BRESSER are ideal for astronomy and landscape observation. Thanks to fully multi coated Bak-4 glass material, the extra large objective 70mm lens diameter and highly corrected eyepieces with 5 lenses in 3 groups, these binoculars provide bright, crisp images from edge to edge of their field of view. The high 15x magnification is convenient not only for observing astronomical objects but is also practical for viewing distant terrestrial objects. Due to a very high reduction of stray light, the binoculars deliver the best possible picture and excellent clarity. With the individual eyepiece focus set you can get a sharp image for all astronomical distances, with no "focus creep" to spoil the view . Foldable rubber eyecups give eye glass wearers the possibility of making the best use of these binoculars wide field of view. Large diameter ocular eyepiece lenses provide extremely comfortable viewing, making longer observations possible without eye fatigue.The binoculars are waterproof and ARGON gas filled to avoid internal fogging. The ergonomic rubber armouring provides a good grip and is also protected against shocks, making them rugged and ideal for transportation. With the tripod thread in the lengthened centre axis, the SPEZIAL ASTRO can be mounted onto any photographic tripod. For tripod use the tripod adapter (part No. 4914925) is icluded. The use of a tripod is highly recommended, as hand holding at the high magnification of 15x makes it difficult to obtain a steady image. FEATURES binoculars for astronomical and landscape observations extremely high light gathering capacity  high magnification for for distant objects fully multi coated optics waterproof and ARGON gas filled against fogging magnification: 15x / objective lens diameter: 70mm individual eyepiece focus and foldable rubber eyecups highly corrected eyepieces for crisp images from edge to edge ergonomic rubber armouring - ruggedly protected against shocks dimensions: 290x215x85mm / weight: 1900g tripod thread availabletripod adapter included SCOPE OF DELIVERY binoculars neckstraptripod adapter dust covers caseinstruction manual

The TELRAD viewfinder is a projection finder that can be installed on any telescope and makes it child's play to align the telescope with the starry sky.The TELRAD viewfinder is a practical alternative to classic optical viewfinders and illuminated red dot viewfinders. You can see the complete starry sky without magnification, and not just a small section as with a normal optical viewfinder. Against this background of the starry sky, three red luminous concentric rings are projected, with apparent diameters of 4 degrees, 2° and 0.5° in the sky. Move the telescope so that the object you are looking for is in the inner ring, and the telescope points in the right direction. Because the object you are looking for is inside the ring, it will not be irradiated like a normal illuminated red dot finder.The base of the TELRAD viewfinder is self-adhesive and can be mounted on all telescopic tubes from about 10cm diameter. The length of the base is about 18cm. This base remains on the telescopic tube, the TELRAD viewfinder itself can be removed or attached at any time by means of the attached quick coupling. The TELRAD is powered by two normal AA batteries (not included).There are star atlases, like the "Deep Sky Travel Atlas" from Oculum-Verlag, and planetarium programs for the PC, like the program "Stellarium", where the three rings of the TELRAD are already drawn or can be displayed around the interesting celestial objects. This makes finding these celestial objects a real walk.FEATURESTELRAD projection finderIlluminated rings of 4 degrees, 2° and 0.5° in the skySee the complete starry sky without magnificationEasy installation and useCan be installed on nearly every telescopesBase with quick release coupling included Powered by two AA batteries (not included) Very long battery life because of LED technologySCOPE OF DELIVERYTELRAD viewfinder with projector and battery compartment TELRAD base with quick-release coupling for the viewfinder Adhesive tape for attachment to telescope

Red dot finder for astronomical telescopes. This finder scope provides an easy way to align your telescope with objects in the night sky.The brightness of the dot can be adjusted via a dial.Designed for the Vixen viewfinder shoe FEATURES Weight: 185 g / 6.53 oz Battery: CR2032 Magnification: 1x 1/4" screw hole, adjustable red pointDELIVERY CONTENTLED red dot finderCR2032 battery

Vixen 39361 camera adapter for eyepiece projection for SLR cameras, C mounts or CCD cameras. Can be attached to the flip mirror unit or rotary adapter on R200SS telescopes.Suitable for PL, NPL, LV and NLV series Vixen 31.7-mm eyepieces (not suitable for LVW series or 50.8-mm eyepieces) Can also be used on Vixen A70Lf, A70Mf and R130SfFEATURESEssential for photographing the moon and planetsSuitable for 31.7-mm eyepiecesCan also be used on Vixen A70Lf, A70Mf and R130SfNot suitable for 50.8-mm eyepiecesCan be connected to Vixen flip mirrorsCan be connected to T2 threadsPACKAGE CONTENTSVixen camera adapter for eyepiece projection