Skip to main content Skip to search Skip to main navigation

BRESSER LED Red Dot Viewfinder for MCX-102 Goto Telescope

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and the direct path to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the appropriate help page directly.

Service Portal

Guides & Tips

FAQ - Frequently Asked Questions

That is normal. Finder scopes are only used to make objects easy to locate. The image orientation does not matter for observation.

  • Alt-azimuth: easy to use, moves horizontally and vertically
  • Equatorial: enables precise tracking of objects with only one axis – ideal for high magnifications and astrophotography

  • Moon: from 30 mm
  • Planets: from 100 mm
  • Deep sky: from 150 mm
Are you a member of an astronomy club? Find out here what your benefits are.
View conditions

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • General safety instructions DANGER Risk of suffocation! Improper use of this product can result in suffocation, especially for children. Therefore, carefully observe the following safety instructions. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a risk of suffocation! Keep cords, ribbons, and similar materials away from children! They could accidentally strangle themselves and suffocate! NOTE Risk of material damage! Improper handling can damage the device and/or accessories. Therefore, only use the device according to the following safety instructions. Do not dismantle the device! In the case of a defect, contact your dealer. They will contact the service center and may send the device in for repair.
  • BATTERY WARNING AND SAFETY Safe handling and use of batteries and accumulators Read and follow these instructions before using the battery or accumulator. To the extent permitted by law, failure to comply with these warnings and instructions may result in any damage caused to your product not being covered by the warranty. In this document, the term "batteries" also includes accumulators. Follow these instructions to ensure optimal safety and performance: DO NOT use counterfeit batteries in products. Only use supplied batteries. Use the battery SOLELY for its intended purpose. Keep batteries out of the reach of children and pets. DO NOT use batteries that appear to be damaged, swollen, or modified. Do not use batteries that are leaking, emitting a smell, swollen, melted, or showing dents, rust, cracks, or scratches. The battery should NOT be disassembled, crushed, punctured, shredded, or otherwise tampered with. The battery should NOT be exposed to liquids. Liquid may penetrate the battery's circuits, causing corrosion and compromising its safety. A wet or damp battery should NOT be dried with a device or heat source (e.g., hairdryer or microwave). The device or battery should NOT be placed near a heat source or direct sunlight. High temperatures can cause the battery to swell, leak, or malfunction. Examples include placing the device near a radiator, stove, kitchen appliance, iron, fireplace, or inside a vehicle or next to a window in direct sunlight. The battery should NOT come into contact with metal objects. If metal objects such as jewelry come into prolonged contact with the battery terminals, the battery may become very hot or catch fire. The battery should NOT be stored together with hazardous or flammable materials. Store the battery in a cool, dry, and well-ventilated area. The battery should NOT be inserted incorrectly when charging. MAKE SURE the battery compartment is empty, dry, and free of dirt before inserting the battery. The battery should NOT be charged in direct sunlight or at extreme temperatures. The battery must be charged at room temperature, typically between 20 °C and 26 °C (68 °F–79 °F). Charging may be temporarily suspended if the battery temperature exceeds 60 °C (140 °F). If the battery is hot but the temperature is under 60 °C (140 °F), the battery will still charge, but more slowly than usual. Avoid dropping the battery or the product with the battery inside. If dropped onto a hard surface, the battery or product may be damaged. If you suspect the battery might be damaged, replace it. Never leave your mobile hotspot plugged into the power supply for more than 24 hours to charge. Let the battery drain and then recharge it. Keeping your mobile hotspot plugged into a charger without draining the battery can damage the battery/device or affect performance. If a battery shows a significantly shorter runtime than when purchased, it has reached the end of its reasonable lifespan. We recommend replacing it. For optimal results and performance, batteries should be replaced after 12 months or earlier depending on usage. Follow local regulations for the disposal of used batteries. Do not throw the battery into fire or water.
Skip product gallery

Customers also bought

BRESSER 10mm Plössl eyepiece 31,7mm/1,25"
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Available

£29.00*
BRESSER 20mm Plössl eyepiece 31,7mm/1,25"
BRESSER 20mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 20 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Available

£29.00*
Skip product gallery

Customers also viewed

BRESSER LED Red Dot Viewfinder for MCX-127 Goto Telescopes
BRESSER LED Red Dot Viewfinder for MCX-127 Goto TelescopesCategory: Spare Part for Messier Telescope SeriesDescription: The high-precision LED Red Dot Viewfinder for Art. 4901127 MCX-127 Goto Telescopes supports quick finding of celestial bodies. Effortless installation and calibration. Compatible exclusively with the BRESSER Messier MCX-127 model. Please check compatibility using the product number on your optical instrument.

Available

£19.00*