BRESSER Extension Tube 25 mm for 2.5" HEXAFOC

Are you having trouble focusing your eyepiece or camera? Then use this 37.5 mm extension sleeve to increase the distance between the 2.5 inch HEXAFOC eyepiece extension and the eyepiece or camera. The extension sleeve has an M68x0.75 mm internal and external thread and can therefore be screwed directly onto the HEXAFOC draw tube. SPECIFICATIONSIncreases the distance to the eyepiece/cameraSuitable for 2.5 inch HEXAFOCOptical length: 37,5 mmInternal and external thread: M68x0,75 mmInside black matt coatedMaterial: aluminium, black anodizedSCOPE OF DELIVERYExtension sleeve 37,5 mm (1 piece)

The EXPLORE SCIENTIFIC 3" 0.7x Reducer/corrector, reduces a compatible telescope's focal length by a factor of 0.7x (for around f/8) and 0.8x (for around f/10) respectively. The reducer/corrector not only reduces the focal length but also flattens the field. Although originally developed for the Explore Scientific ED-APOs 127mm and 152mm, the reducer can be used with many systems - for example with the Explore Scientific ED-APOs 102mm and 165mm (please note, this will not work on the Explore Scientific 80mm ED Apo refractors though). With certain telescope focal lengths, a slight restriction of the correction at the edge of the image field can be expected when using full-frame sensors. This unit comes with 3" barrel adaptor for direct focuser thread M54x0.75 (the standard focuser thread of the Explore Scientific Essential series of ED Apos) and T2 camera adaptor. This reducer/corrector features a free aperture of 65mm, so that it can be used even with cameras that have a large sensor - if the telescope allows for this. Note: As previously mentioned, this Reducer/corrector comes with a screw on ring, which fits the standard focuser thread of the Explore Scientific Essential series of ED Apos. For telescopes which are equipped with the 2.5" HEX Focuser, the optional screw-on adapter part no: 0510366 is needed. Other telescopes, not in the Explore Scientific range, with standard 2" push-fit focusers will need the Explore Scientific 2" Adaptor for 3" Corrector - part no: 0510364 to get this reducer correctly fitted. SPECIFICATIONS Reduces the focal length by 0.7x at f/8 Flattens the field for astrophotography Developed for ED127 und ED152 APO telescopes Also fits Explore Scientific ED102 and ED165 telescopes - and others Free aperture: 65mm Inner thread for telescope adaption: M76x0.75mm Outer thread for camera adaption: M72x0.75mm 3" focuser barrel adaptor included Adaptor for Explore Scientific focuser M54x0.75mm included T2 camera adaptor M42x0.75mm included Diameter: 78.5mm; length: 100mm Length without adaptors: 52mm Weight without adaptors: 530g What's Included Reducer/Flattener 3" focuser barrel adaptor Adaptor for Focuser M54x0.75mm T2 camera adaptor M42x0.75mm Dust caps

The BRESSER USB Motor Focuser for HEX and R&P lets you achieve pinpoint focus on your telescope remotely and without any physical contact – whether you're enjoying a casual visual session or pushing the limits of astrophotography. The EAF works with hexagonal (HEX), rack-and-pinion (R&P) and most other standard focusers, connects in seconds via USB-C, and gives you the choice between manual control via the hand controller and fully automated focusing through your astro software of choice. Hands-off focusing via hand controller The included wired hand controller lets you dial in focus from a distance without laying a finger on the telescope. For astrophotography, this is a genuine game-changer: imaging sessions run uninterrupted and your focus stays locked in from first light to the end of the night. Visual observers will appreciate it just as much – precise focus adjustments on demand, no fumbling in the dark. Autofocus and broad software compatibility The EAF integrates smoothly with the most popular astro software packages. The ASCOM driver covers the vast majority of Windows-based applications, while full INDI and INDIGO support makes it equally at home on Mac and Linux. If your software includes an autofocus routine, the motor will handle everything automatically – a real asset for long, unattended imaging runs.Temperature sensor for sharp results all night long As the night progresses, temperature drops can cause the telescope tube and optics to contract slightly – enough to nudge your focus point off target. The included temperature sensor tracks these changes continuously and, paired with compatible software, compensates for any thermally induced focus shift on the fly. The result: consistently sharp images from dusk till dawn, with no manual intervention required.Please note: The temperature sensor and hand controller cannot be used at the same time. FEATURES Precise electronic motor focuser Plug and Play via USB-C Compatible with HEX, R&P and most standard focusers ASCOM, INDI and INDIGO driver support for maximum software compatibility Autofocus support via third-party software Manual focusing via hand controller Temperature sensor to compensate for thermally induced focus shift Robust aluminium housing SCOPE OF DELIVERY Electric motor focuser Mounting plates Wired hand controller Screws Washers Flexible couplings USB cable Temperature sensor Allen key Manual

Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2 plug-in diameter (item no. 0510365).However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or RitcheyChrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.FEATURES5 T2 tubes with lengths from 5 mm to 30 mmCombination of tubes allows you to obtain distances of 5 mm to 67.5 mmFor exact camera distances in astrophotographyDELIVERY CONTENT5x T2 extension tubes (5/7.5/10/15/30 mm)1x SC to T2 thread adapter

Explore Scientific's Sun Catcher Variable Large Aperture Solar Filtersadvanced 'Solarlite'Thousand Oaks Optical NOTE:ISO12312-2 Thousand Oaks Opticalapproved for direct observation of the Sun.SPEZIFICATIONSSpecial objective filter for safe solar observationsISO12312-2 ratedField-stop diameter 90mmFits to outer telescope tube diameter from 90 to 160mmQuick individual match with your telescope diameterFast Setup - Easy UseSCOPE OF DELIVERY1x Sun Catcher solar filter

With teleextenders it is possible to extend the effective focal length of a telescope system, resulting in higher magnification for the observation of the moon, the planets or small Deep-Sky objects with the same eyepieces. So you can use the advantages of eyepieces with longer focal length - such as the bigger eye distance and the more relaxed observing comfort - at high magnifications also.These teleextenders incorporate a telecentric optical design that deliveres a excellent image sharpness over the whole field of view and are premium choices for visual observations and astrophotography. The combination of excellent fully multicoating with superior optical design makes the Focal Extenders superior to classic Barlow lenses.Features: Suitable for visual observations and astrophotographyDoubling the effective total focal length of the telescopeFour lens telecentric design Fully multicoatedFilter thread for color or nebula filters