BRESSER Darkfield Condenser dry

High-quality dissecting tool set for amateur and professional purposes. Made in Germany! No matter if amateur microscoper or professional - working with inferior tools is unsatisfying. For that reason, we offer these dissecting tools to you. They are made from Solingen steel and meet the highest quality demands. Accessories • 1 Spatula • 1 Scalpel • 1 Tweezer • 1 Scissor • 1 Slice catcher • 2 Preparation Needles • Imitation leather case

Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.

The set slides / cover plates is use to make Preparations for biological microscopes. The slide holds the preparation it will be covered with a cover plate.SCOPE OF DELIVERY50 blank slides 76x26mm100 cover plates (0,17mm thickness)These BRESSER slides and cover glasses are compatible with the following BRESSER microscopes:Duolux (5012000)BioDiscover (5013000)BIORIT (5101000)Erudit DLX (5102000)ERUDIT MO (5110000)Researcher Bino (5722100)Researcher Trinocular (5723100)LCD microscope (5201000, 5201002)Science TRM 301 (5760100)BioScience Bino (5750500)BioScience Trino (5750600)Science ADL 601 P (5770200)Science ADL 601 F (5770500)Science MPO 401 (5780000)Science IVM-401 (5790000)

C-Mount MikroCam adapter for BRESSER Science microscopes connects the BRESSER MikroCam to many BRESSER Science microscopes. The camera can be connected directly. If you want to use a reducing lens 0.5x or 1.0x, the additional adapter with item code 5942030 is necessary.Suitable for the following BRESSER microscopes:BioScience Trino (5750600)Science TRM-301 (5760100)Science ADL-601P (5770200)Science ADL-601F (5770500)Science MPO-401 (5780000)Science IVM-401 (5790000)Science MTL-201 (5807000)Science ETD-301 (5806300)SCOPE OF DELIVERY1x adapter

The zoom stereo microscope BRESSER Advance ICD is suitable for a wide variety of objects. Because of the Greenough design with two tilted objectives, you can view the sample in 3D. The three-dimensional view is also very helpful when working under the microscope, e.g. when soldering, dissecting or preparing a sample.The precise zoom enables you to view your sample in a wide range of magnifications from 1x to 4x (zoom ratio 4.0). When zooming, only slight refocussing is necessary. To do this, the Advance ICD microscope is equipped with a very precise, coaxial coarse and fine focus. The fine focus is especially helpful when using high magnifications or for imaging. When doing focus stacking with our MikroCam cameras (optional) the fine focus is also a big help.The interpupillary distance of the eyepiece pair is adjustable. Both eyepiece holders are equipped with diopter adjustment, which allows users with bad eyesight to compensate up to 8 dpt. difference between left and right eye. The 10x wide field eyepieces have field number (FN) 22 and are equipped with soft rubber eyecups. The microscope head can be moved on the long rod of the stand, which allows you to observe big samples up to a size of 22 cm.The angle of the bright LED reflected light illumination can be adjusted as necessary. The extra bright and even LED transmitted light provides a flat background when viewing transparent samples. The switch allows you to select reflected light, transmitted light or a combination of both to match your requirements. Brightness is adjustable with the dimmer. The bright light does not heat up, which allows you to observe also living specimens over a longer period of time. The long lasting LED is powered by a 5V AC adapter (EU/UK). The power cable comes with a USB plug.Fully equipped, the Advance ICD covers an exceptionally wide range of magnifications and is therefore suitable for a variety of tasks. Besides the included 2x lens there is also a selection of other auxiliary objectives available. With these, you are able to adjust magnification, working distance and depth of focus according to your needs.Magnifications in basic setting (no optional accessories):10x eyepieces: 10x – 40x10x eyepieces plus 2x auxiliary lens: 20x – 80x20x eyepieces: 20x – 80x20x eyepieces plus 2x auxiliary lens: 80x – 160x(other magnifications are possible when using other auxiliary lenses and/or eyepieces)The third tube is designed to permanently attach a camera. The image of the left eyepiece is diverted to the camera port with a lever/switch. We supply a selection of camera adapters for DSLR, mirrorless cameras and c-mount microscope cameras. This enables you to attach virtually any camera body as long as you have a model with interchangeable lens.APPLICATION RANGEQuality control in industryMaterials scienceLaboratoryBotany, gardening, farmingHydrology, aquaculture, fishkeepingInsects, Entomology, pest controlPlant physiology, raw food materials, medicinal herbsSchools, teachingFEATURESTrinocular head with 2 eyepieces and camera port with switchCompatible with BRESSER MikroCam cameras and others1x-4x stereo-zoom head2x auxiliary lensDiopter adjustment on both eyepiece holdersAdjustable interpupillary distance (52 – 72 mm)Bright LED light (reflected / transmitted)2 different object plates for best contrastView samples of up to 22 cm heightAC adapter Euro/UK (5V / 1000 mA) with USBHeavy build with metal standIncludes 2 pairs of widefield eyepiecesSCOPE OF DELIVERYMicroscope2 pairs of eyepieces (WF 10x / WF 20x)2x auxiliar lens (1 pcs)1 pair of rubber eyecupsObject plate 94 mm (black / white)Glass object plate 94 mm (matte)AC adapter Euro/UK (5V / 1000 mA)Dust coverPrinted manual

Slides and cover glasses are an indispensable accessory which has also impact on the image quality. For most biological microscopes, the cover glass thickness is an important optical parameter, which is therefore included in the optical design and, if so, printed on the sleeve of every objective. You can usually see the number 0.17 which is the thickness in millimeters. For demanding applications in the laboratory, or for microphotography, using cover glasses with the desired thickness and high quality is necessary.The cover glasses included in the set are made of Boro 3.3 glass and are standardized to a thickness of 0.16-0.19mm. So they match the desired 0.17mm really good and give the best possible image quality. These Boro 3.3 cover glasses are pure white, without streaks and are pre-cleaned and ready to use. They are also especially suitable for fluorescence microscopy.The slides are made of soda lime glass, and have ground edges for safe handling. They have a matte field for writing on both sides (top and bottom). Slides and cover glasses are packed separately and in a vacuum sealed bag, containing moisture absorbent. They can be stored for a long time without loss of quality from hydrolysis and are easy to take out.