BRESSER Dachstein 20-60x80 ED 45° Spotting Scope

The BRESSER BX-10 Pro Tripod with Fluid Pan-and-Tilt Head is a very versatile tripod that is height and angle adjustable. The ball head has a load capacity of 12 kg. This makes the tripod extremely flexible and one can work with different camera models, binoculars, spotting scopes and astronomy binoculars. The non-slip rubber feet are ideal for grip on smooth surfaces indoors, but also offer extremely good grip on muddy, sandy and uneven surfaces outdoors. This all-round tripod by BRESSER features aluminium alloy tripod legs and a fluid head with a 70 mm diameter base. The four-piece legs are locked with a quick-lock swivel system. The base of the ball head is equipped with a 3/8" mounting thread. For panning and tilting the ball head, the supplied handle is used. This handle can be mounted on the left or right side. Also, the handle can be adjusted in length with a minimum length of 26 cm and a maximum length of 35 cm. The desired length can be fixed with the handle extension lock. The folded tripod has a height of 82 cm and can be extended to a height of 184 cm. If you also extend the centre column, you reach a maximum height of 216 cm. The minimum working height of the tripod is 78 cm. If you spread the legs to their maximum, the minimum working height is 62 cm. The tripod head allows 360-degree swivels and tilts from +90 to -70 degrees. The quick release plate is universal and features a standard tripod connection (1/4" screw) and a 3/8" screw that allows you to easily mount any camera, binocular adapter, spotting scope or astronomy binocular on the tripod head. Thanks to the built-in level, you can also see if your tripod is level. The unused screw can be turned into the appropriate compartment on the tripod head so that it does not get lost and is always at hand. The quick release plate is secured by a safety device. The tripod with fluid head weighs 3,786 grams. The center column has a hook that helps to ensure stability. For example, use a sandbag, water bag, backpack and even rocks in a bag to improve balance. A carrying bag is included for easy storage and transportation. FEATURES Very sturdy all-in-one tripod High quality construction Fluid Pan-and-Tilt Head Folded length: 82 cm Minimum working height: 78 cm (tripod legs normally spread) Minimum working height: 62 cm (tripod legs spread to the maximum) Maximum working height: 216 cm Tripod load capacity (as a set): 10-12 kg Load capacity ball head: 10-12 kg Tripod load capacity: 20 kg Tripod and ball head weight: 3,786 grams Level Height adjustable central column Hook for counterweight 1/4" and 3/8" connection Carrying bag SCOPE OF DELIVERY BRESSER BX-10 Pro Tripod BRESSER BX-10 Pro Fluid Pan-and-Tilt Head Fluid Pan-and-Tilt Head handle Quick Release Plate 50 x 92 mm 1/4" screw 3/8" screw Carrying bag with pocket

See the night sky through the bright BRESSER Special-Astro 15x70 Porro binoculars. The very large 70 mm lenses allow ample light into the optics. The outstanding BaK-4 glass material and the full multi-layered coating increase light transmission further still, allowing for breath-taking, sharp and brilliant images of distant galaxies, familiar constellations and more. In addition, the high-quality Astro binoculars are fitted with a highly precise centre drive for super-fast focus on your favourite celestial objects. For a shake-free image, simply attach a tripod (not included) to the practical tripod connection thread on the BRESSER Astro binoculars.  Special Astro binoculars - strong performance, even when wearing glasses Glasses wearers can also enjoy the best possible view when exploring the wonders of the universe with the Porro Astronomy binoculars - simply fold down the rubber eyecups for the perfect distance between the eyes and the eyepiece lenses when observing the sky. The difference in the visual acuity of the eyes can also be compensated with dioptre compensation.  See the night sky with the 15x70 Astro binoculars On crystal-clear nights, do you find that your eyes are automatically drawn upwards towards the sky? Would you like to take a closer look? These Astro binoculars are the ideal entry-level binoculars for an exciting introduction to astronomy. With a field of view of 77 m at 1000 m, you can better orientate yourself in the night sky when observing than with a telescope. Flat nebulae, galaxies and constellations appear in your field of vision complete and fascinating thanks to 15x magnification. Even experienced astronomers love to grab their binoculars - and with the 15x70 Astro binoculars, they can enjoy brilliant views of large-scale objects such as the Orion Nebula M42 or the Milky Way and its clusters of stars. Terrestrial nature up close with the Astro binoculars Our own planet has plenty to see too, so why not take the binoculars along on your long-range observations so that you can get a closer look? Gaze at a rare animal or at a stunning landscape from 1500 m away as if you were just 100 m away. After use, simply replace the dust caps and pop the binoculars in their case! That way, your Astro binoculars will remain well protected until your next adventure. Be amazed by the overwhelming beauty of the night sky and more with the BRESSER Special-Astro 15x70 Porro binoculars. FEATURESLarge binoculars for astronomical and long-distance observations Extremely high light-gathering power Magnification: 15x Lens diameter: 70 mm High-quality BaK-4 optics Full multi-layered coating Tripod connection thread Dioptre compensation Foldable rubber eyecups for observing while wearing glasses DELIVERY CONTENTAstronomy binoculars Bag Dust caps Lens cleaning cloth Instruction manual

The Travel Spotting Scopes are, because of the compact design, perfect for nature observation and bird watching. Especially the accurate and fast focus makes it up and allows for a quick and simple focusing. Armed with fully-coated optics and BK-7 prism, they have a high magnification and still a bright and clear picture. The TwistUp eyecups support the view with as well as without glasses. With the smooth zoom function, a 20-60 times magnification can be realized. For better stability you can use the included table tripod. FEATURES lightweight and compact spotting scope for on the way continuously adjustable zoom range also suitable for eyeglass wearers SCOPE OF DELIVERY Spotting scope Table tripod Bag with carrying strap Protective caps for eyepiece and objectiveManual

AXD2 GoTo mount with VMC260L telescope set The AXD2 mount comes with the new STARBOOK TEN controller and the PFL polar viewfinder, which allows you to configure the mount quickly and easily via reference stars. This telescope set has everything that you need for hobby astronomy. The set includes a telescope, a mount with automatic tracking and a stable tripod. Featuring the STARBOOK TEN controller, the telescope locates celestial objects automatically so that you don’t need to search for them manually. Even if you’re not an expert, you can still give your friends an exciting tour through the night sky! The AXD 2 mount in detail: Robust construction and lightweight housing with 30 kg load capacity (photographic) The RA and DEC axes are made using the A7075 superalloy, one the strongest aluminium alloys. The stability of the A7075 superalloy is stronger than titanium, which is known for its strength as a lightweight material. Its thickness is 38% less than titanium. Using the A7075 superalloy for the axes ensures that the AXD mount is both lightweight and stable. 21 bearings The rotating parts of the AXD mount have a total of 21 bearings. These ensure uniform motion in order to swivel the telescope and track objects. Stepper motors Vixen uses precise stepper motors for the mount in order to ensure optimal performance. The motors are controlled via a micro-step motion control system, which eliminates the disadvantage of stepper motors with large steps. The system generates 400 impulses per second at a high speed. This results in very quiet scanning with no vibrations. The stepper motors on the AXD mount have sufficient torques. This is most significant when working at high magnifications and photographing with a CCD camera with small pixel sizes. Worm gears The sizes of the worm gears were increased in the latest Atlux version. The AXD mount has 270 teeth in the RA axis and 216 teeth in the DC axis. Both axes are 50 mm in diameter. This ensures that the mount operates with precision and stability. Low backlash The Vixen micro-step motion control system ensures that the stepper motors run uniformly at low and high speeds. This eliminates the need for reduction gears in the motor and therefore reduces the backlash in the gears. Elegant design The flat sides of the mount were designed based on previous generations of the New Atlux range. The white and silver housing provides a modern and elegant exterior with high functionality. The AXD is the flagship model in the Vixen mount range. Original motor layout The solid RA and DEC motor units are arranged in the lower part of the mount. This means that they automatically act as a counterweight. As a result, you require far fewer weights on the counterweight bar. On small devices, no counterweight is required. The counterweight bar can be slid fully into the housing. Polar finder scope The AXD mount is equipped with a 6x20 polar finder as standard. The polar finder features an integrated scale, which provides a quick and easy way to polar align the telescope in the northern hemisphere. For observations in southern latitudes, the polar finder features an image of the Octans constellation, which can be aligned with the night sky. VPEC periodic error correction Periodic errors on mounts are usually measured and corrected by the user. Unlike the old StarBook controller, the STAR BOOK TEN controller saves these errors permanently. The periodic error of the mount is measured in the factory and corrected before delivery. This is known as VPEC and functions automatically as soon as you use the mount. It delivers an accuracy of +/- 2.8 arc seconds. You can increase the tracking accuracy further by saving your own recorded periodic errors. The VMC 260 in detail The optics of the VMC260L are significantly better than the traditional Schmidt-Cassegrain telescope. Despite its high 3000 mm focal length, it is just 650 mm long. Featuring a large 260 mm aperture, the telescope collects large amounts of light for serious professional observations and photography of the planets and countless deep-sky objects. Thanks to the dielectric mirrors, the VMV260L guarantees razor-sharp images and maximum brightness. The open lens barrels cool the telescope quicker than conventional closed Cassegrain systems. The telescope can be used with an optional 0.62x focal reducer to reduce the aperture ratio to 1:7.1. This shortens the exposure times and allows you to photograph large objects. The telescope comes with a standard dovetail bar and a carry handle that doubles up as a camera holder for night sky photography. FEATURES AXD2 GoTo mount with VMC260L telescope Professional telescope kit with TR102 tripod Mount with 30 kg load capacity (photographic) Modern STARBOOK TEN controller with autoguider input More than 270,000 pre-installed celestial objects Illuminated polar finder with direct star alignment Professional Maksutov-Cassegrain with 260 mm aperture Very stable metal observatory column Total weight: 70.1 kg WHAT’S INCLUDED P85 observatory column 2 counterweights (1.5 kg and 7.0 kg) 7x50 finder scope Folding mirror Carry handle

The BRESSER Pirsch Gen II spotting scopes are primarily intended for nature observers and hunters. Equipped with a light-intense, fully broadband multi-coated 80 mm lens, they allow higher magnifications even at twilight. This spotting scope is also equipped with the high-quality UR coating for brighter images. Together with the waterproof and nitrogen-filled housing and the non-reflective enforcement, nature observers can determine e.g. bird species in any weather or hunters can target game even at long distances. Photography But also friends of digital photography will find a reliable tool in the Pirsch series: together with the DSLR adapters 49-20002 or 49-14911 almost all digital cameras or smartphones can be connected. Robust materials The focus and eyepieces are made of sturdy metal for a long-lasting pleasure with the Pirsch spotting scope. The rubber enforcement is manufactured to ensure a firm grip. Compensation The Pirsch spotting scopes of Gen. II are all equipped with the new UR coating. This special coating ensures better light transmission and therefore provides a bright image even in difficult lighting conditions. 10:1 focusing An important factor in optical devices is optimal focusing. Here, we at BRESSER have paid great attention to fast and easy focusing as well as very precise focusing. Thus, the focus of the Pirsch spotting scope can be adjusted quickly and down to the last cm. This is ensured by the 10:1 ratio of the focus. Waterproof and nitrogen filled All Pirsch models are waterproof and nitrogen filled. So you have the perfect companion with you in all weather conditions. Rain or fog does not matter to the device. Fogging from the inside in case of large temperature differences is prevented by the nitrogen filling and thus ensures that the device is always ready for use. PROPERTIES Zoom perspective slanting view fully multi-coated optics UR coated optics very high light collecting capacity waterproof and nitrogen filled housing SCOPE OF DELIVERY Spotting scope Ready bag for spotting scope Instructions

Take photos with your smartphone through your spotting scope, microscope or telescope. It’s a child's play with the BRESSER Universal Smartphone Adapter. Simply attach the adapter to the eyepiece holder of your optical device and then use all together as a telephoto lens for your smartphone camera. Now you can shoot distant objects as if they were up close or take photos through a microscope.FEATURESuniversal adapter to assemble the smartphone to a spotting scope or telescopefor eyepieces up to 68 mm diameterfor smartphones with a width of 50-88mmSCOPE OF DELIVERYSmartphone adapterManual