BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set
6 hygro indicators to check the indoor climate
- Temperature and humidity display
- Display of indoor climate
- Ideal temperature: 20-27°C, humidity: 40-70%
- Dimensions: 4,5 x 5,8 x 1,3 cm / Weight: 31 g
- Incl.: 6 Thermo-/Hygro sensors, 6 batteries (CR2032), manual
- Smiley as room climate indicator
- Thermometer and hygrometer in one!
- Mounting type: stand, wall mount and magnet
£37.99*
Available, delivery time: 10-12 working days
Product number:
7000015MGU000
EAN:
4007922093567
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set"
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.
If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms).
Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action.
FEATURES
If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms).
Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action.
FEATURES
- Temperature display in °C
- Air humidity
- Symbolic room climate indicator
- Early prevention of mould
- Mounting type: stand, wall mount and magnet
- 6x Thermo-/Hygro Station
- 6x CR2032 batteries
- manual
| Assembly required: | No |
|---|---|
| Batteries included: | Yes |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | black , grey , white |
| Display height (cm): | 4 |
| Display size (diagonal in cm): | 4.98 |
| Display width (cm): | 3.1 |
| Extended warranty (years): | 5 |
| Height of the largest digit on the display (cm): | 1.7 |
| Inside temperature (°C) from: | 0 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement function: | Humidity (inside) , Inside temperature |
| Net Weight total (incl. accessories) (g): | 27 |
| Net weight (without access.) (g): | 75 |
| Number of articles: | 6 |
| Power supply 1): | 3V Batteries |
| Power supply unit included: | No |
| Total height (mm): | 13 |
| Total length (mm): | 58 |
| Total width (mm): | 45 |
| Typ [Batteries]: | CR2032 |
| Type of mounting: | Magnet , Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Customers also bought
BRESSER Thermo-Hygrometer with Mould Alert
£23.99*
When it comes to your well-being, don't settle for less – this includes maintaining a healthful environment. Keep your indoor climate in check with the BRESSER Thermo-Hygrometer with Mould Alert. It accurately measures temperature and humidity and impresses with comprehensive warning functions. You'll always know when to heat, ventilate, humidify, or dehumidify.
Mould prevention made easy – with the BRESSER Thermo-Hygrometer
Especially in older buildings or during the cold months, it sometimes creeps into the basement or living area: mould. This temperature and humidity measuring device warns you when the conditions for mould growth are particularly favourable. So with the thermo-hygrometer at your disposal, you can swiftly and efficiently take measures to ward off mould in your environment.
Thermometer and hygrometer with handy alert features
This BRESSER Thermo-Hygrometer quickly becomes an invaluable guide for your well-being. The clear display shows the integrated heat warning, which alerts to unfavourable levels of high temperature and humidity. Ideal for individualists: set a personalised humidity alert to be informed when your specific humidity thresholds are crossed.
Take control of your indoor climate now - with the BRESSER Thermo-Hygrometer with Mould Alert!
FEATURES
Thermo-Hygrometer with mould and heat warnings
Measures indoor temperature and humidity
Five-level colour-coded climate indicator
Graphical humidity trend history
High/low humidity alarm settings
Battery-powered: 2x AAA (Micro), 1.5V (not included)
SCOPE OF DELIVERY
Thermo-Hygrometer
Instruction manual
Available
