BRESSER ClimaTemp Thermo-Hygrometer
Temperature and humidity meter with comfort indicator and magnetic mounting – perfect for a quick indoor climate check
- Measures indoor temperature and humidity
- Smiley display indicating indoor comfort level
- Stand, hanging loop and magnet
- Dimensions: 44 x 57 x 13 mm / Weight: 25 g
- Scope of delivery: 1 thermo-/hygrometer, 1 CR2032 battery, instructions
Product number:
16491
EAN:
4007922202990
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER ClimaTemp Thermo-Hygrometer"
You'll warm to the BRESSER ClimaTemp Thermo-Hygrormeter immediately. Compact and unobtrusive, this clever little device reliably keeps tabs on the temperature and humidity around you – so you always know at a glance whether your indoor climate is where it should be.
Keep an eye on your indoor climate with a smile
Wondering about the air quality in your home? The clear display gives you an instant read on the current comfort level: a happy smiley means temperature and humidity are spot on. A neutral expression tells you things are still perfectly fine. And if an unhappy smiley appears, it's time to do something about it.
Small and easy to mount – the temperature and humidity meter
Getting it up and running couldn't be simpler. The built-in magnet means that the digital hygrometer and thermometer snaps straight onto the fridge, a magnetic board, or anything similar in no time at all. Prefer to keep it on a sideboard, chest of drawers, or your desk? No problem. You can even hang it on the wall with a nail. Either way, its compact dimensions mean it'll never get in the way.
Order your BRESSER ClimaTemp Thermo-Hygrormeter today and enjoy the perfect indoor climate at home, in the office, and beyond.
FEATURES
- Thermometer and humidity meter in one device
- Temperature display in °C
- Humidity in %
- Smiley as indoor climate comfort indicator
- Suitable for mould prevention
- Magnet on the back panel
- Batteries required: CR2032, 3V (included)
SCOPE OF DELIVERY
- 1x Thermo-Hygrometer
- 1x CR2032 battery
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | Yes |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | white |
| Display height (cm): | 4 |
| Display size (diagonal in cm): | 4.8 |
| Display width (cm): | 3 |
| Extended warranty (years): | 5 |
| Features: | Indoor climate indicator |
| Height of the largest digit on the display (cm): | 1.5 |
| Indoor sensor humidity measuring range from (%): | 10 |
| Inside temperature (°C) from: | 0 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement accuracy inside humidity (%): | ± 5 |
| Measurement accuracy inside temperature (°C): | ± 1 |
| Measurement function: | Humidity (inside) , Inside temperature |
| Measurement range for indoor humidity sensor up to (%): | 99 |
| Net weight (without access.) (g): | 21 |
| Power supply 1): | 3V Batteries |
| Power supply unit included: | No |
| Resolution inside humidity (%): | 1 |
| Resolution inside temperature (°C): | 0.1 |
| Temperature range max. (°C): | 50 |
| Temperature range min. (°C): | 0 |
| Total height (mm): | 13 |
| Total length (mm): | 57 |
| Total width (mm): | 44 |
| Typ [Batteries]: | CR2032 |
| Type of mounting: | Magnet , Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- SUFFOCATION RISK! Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK!
- RISK OF ELECTRIC SHOCK! This device contains electronic parts powered by a power source (batteries). The device must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK!
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- Risk of material damage! Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary.
- WARNING! Do not immerse the device in water. Do not expose the device to strong impacts, shocks, dust, prolonged high temperatures, or extreme humidity. This may cause malfunctions, short circuits, or damage to the batteries and components.
- WARNING! Use only the recommended batteries. Always replace weak or depleted batteries with a completely new set of batteries with full capacity. Do not use batteries of different brands, types, or varying capacities. Remove the batteries from the device if it will not be used for a long period!
- WARNING! The manufacturer assumes no liability for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery
Customers also bought
BRESSER Blank Slide with 0.1 & 0.01mm micrometer
£59.99*
Microscope slides with a micrometer scale are used for the calibration for measurements.They are used in combination with a micrometer eyepiece or a measurement software (for cameras) in order to measure preparations. The broad scale is suitable for lower magnifications, the fine scale for higher magnifications.
Available
BRESSER WF 10x/22 Crosshair Micrometer Eyepiece for several Bresser Science Microscopes (30)
£92.99*
This crosshair micrometer eyepiece enables the measurement of a specimen. The crossed scale facilitates horizontal and vertical measurement without rotating the eyepiece. For optimal visibility, the crosshair is focusable.
The barrel diameter is 30 mm, allowing for a large field of view of 22 mm.
An additional micrometer slide is required for calibration. Two different measuring slides are available:
A measuring scale (Item No. 5916710): 1 mm, divided into 0.01 mm increments.
Two measuring scales (Item No. 5916720): 10 mm, divided into 0.1 mm increments, and 1 mm, divided into 0.01 mm increments.
This BRESSER micrometer eyepiece is compatible with the following BRESSER microscopes:
Science TFM-201 (5750800)
Science TFM-301 (5750900)
Science Infinity (5706700)
Science ADL-601F (5770500)
Science ETD 201 (5806200)
Science ETD 101 (5806100)
SCOPE OF DELIVERY
1x BRESSER WF10x 30 mm crosshair micrometer eyepiece
Available
BRESSER MikroCam II 20 MP 1'' Microscope Camera
£1,002.99*
The BRESSER MikroCam II 20 MP 1’’ microscope camera is the professional solution when it comes to microscope imaging.
This camera has a big 1’’ sensor (image area 13.06 x 8.8 mm); this is the biggest sensor of the MikroCam camera range. With this camera it is possible to document roughly the same field of view as it can be seen through the eyepiece (e.g. when using a 10x / 22mm). Other models will cover only 50% or less of the eyepiece field of view.
The Sony IMX183 CMOS-sensor is very sensitive and has extremely low image noise, which makes this camera especially suitable for contrast methods like dark field or phase contrast.
The MikroCam Lab II software comes with a wide range of professional functions, e.g. measurements in live view (calibration slide needed), mosaic, Focus-Stacking (for improved depth of field). All automatic functions (exposure time, gain, white balance etc) can be adjusted manually as well.
Due to the big sensor size the camera will not work with all microscope models. It might be possible that the optics will not illuminate the full sensor, so you experience vignetting. Usually this can be resolved by using the optional 1x optical adapter (item no. 5914001).
Please note that this camera model is not suitable for the stereo microscope BRESSER Science ETD-201. It will cover only a small field of view.
SPECIFICATIONSRobust metal housingProfessional software suite including measurements, dark and bright field calibration, focus stacking, mosaic and moreSave images and video, including time lapsecompatible to most microscopesHigh speed USB 3.0 connection for high frame rateModern Sony® IMX183 Sensor 13,06 x 8,8 mm (1'')1/4’’ connectorC-Mount adapter, compatible with c-mount lenses
SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 6nd generation orAMD Ryzen CPUOptical Disk Drive or internet connection for software downloadUSB 3.0, 3.1
SCOPE OF DELIVERYcamera bodyUSB 3.0 cable23.2 mm, 30 mm und 30.5 mm adapterSoftware for imaging and processing (Windows compatible)
Available
Skip product gallery
Customers also viewed
BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors
£122.99*
With the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, innovation flows through your weather data. This clever device allows you to access readings from your existing BRESSER weather station or various optional sensors (not included), wherever you are. It automatically uploads them to the most popular online platforms via Wi-Fi. With the built-in thermometer, hygrometer, and barometer, you can also monitor air pressure, indoor temperature, and humidity indoors.
A great upgrade: add Wi-Fi to your weather station
Already own a BRESSER weather station, but missing Wi-Fi to complete your meteorology setup? Check below to see if the Wi-Fi Gateway El Niño is compatible with your model. If it is, you can quickly transform your existing device into a Wi-Fi-enabled weather station. You can also add optional sensors (not included) for online data monitoring to enhance your weather tracking.
Always available: your weather data on online platforms
Stay up-to-date automatically: Your weather data is uploaded directly to platforms like ProWeatherLive, Weather Underground, and Weathercloud via the Wi-Fi Gateway. This allows you to share your station’s readings with the wider weather community. A handy extra: Three years of membership with ProWeatherLive are included with your purchase.
Customise your professional weather station
Do you have your own idea of what a weather station should look like? With the Wi-Fi Gateway for up to 20 sensors, you can create your perfect setup. Just consult the list of compatible BRESSER devices, and you’ll soon have your customised weather expert at your fingertips.
Whether you're expanding or starting from scratch, with the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, you can either bring your current weather station online or build your very own.
FEATURES
Compact Wi-Fi Gateway for automatically uploading local weather sensor data to online platforms Receives measurement data from optional weather sensors (not included) Publish data on ProWeatherLive (includes 3 years membership), Weather Underground, Weathercloud, and one additional platform Access your data online anytime, anywhere Measures indoor temperature, humidity, and air pressure Configure Wi-Fi, time, weather platforms, calibration, and firmware updates easily via the WSLink app Compatible with the following BRESSER weather stations:Item No: WSX3001 / 7003600QT5000 / 7003600GYE000 / 7003600CM3000 / 7003100QT5000 / 7003100HZI000 / 7003100GYE000 / 7003100CM3000 / 9080700 / 9080600 / 9080500 / 7003900 / 7003800 / 7003700 / 7003510 / 7003500 / 7003360 / 7003300 / 7003240 / 7003230 / 7003220 / 7003210 / 7003200 / 7002620 / 7002590 / 7002586 / 7002585 / 7002582 / 7002581 / 7002580 / 7002571 / 7002551 / 7002525**Item No.: 7002513 / 7002512 / 7002511 / 7002510 / 9602510 - exclusively LOT No. 1164820 and higher**Item No: 7002550QT5000 / 7002550GYE000 / 7002550CM3000 - exclusively LOT No. 973504 and higher**Compatible with many optional sensors (not included): 1x professional sensor (Item Numbers: 7802580 / 7803300 / 7803200 / 7803510) Up to 7x thermo-hygro sensors (Item Number: 7009971), soil sensors (Item Number: 7009972), or pool sensors (Item Number: 7009973) (not included) Up to 7x water detectors (Item Number: 7009975) (not included) 1x lightning sensor (Item Number: 7009976) (not included) 1x PM2.5/10 sensor (Item Number: 7009970) (not included) 1x CO2 sensor (Item Number: 7009977) (not included) 1x HCHO + VOC sensor (Item Number: 7009978) (not included) Mounting: Stand or wall mount Power supply: USB cable with power adapter
SCOPE OF DELIVERY
Gateway USB cable USB power adapter User manual ** Item No. and LOT No. are shown on the device and the packaging.
Available
