LCD Weather-Clock ClimaTemp JC
- Large Ultra Wide Angle (UWA) Display, easy to read display
- indoor/outdoor temperature
- Humidity
- Barometric weather forecast
- Scope of delivery: 1x weather wall clock, 1x outdoor sensor, 1x instruction manual
- Self Setting Clock -Adjusts for Daylight Savings Time
- Displays time, indoor & outdoor temperature and weather prediction
- Wall or desk mounted
- Display max. and min. temperature memory
- Forecasts Weather 12-24 hours in Advance
£75.67*
% £85.99* (12% saved)Available, delivery time: 10-12 working days
Product number:
12081
Former product no.:
7004404CM3000
Note: Our item numbers have been updated.
You can continue to search for products using either the previous or the new item number.
EAN:
4007922032146
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER ClimaTemp JC LCD Weather-Clock"
The BRESSER ClimaTemp JC LCD Weather Clock has the worldwide first "ultra wide angle" (UWA) display. The large presentation and the broad viewing angle provide for an easy reading of the shown information from almost any position in the room.
Always have an eye on indoor and outdoor temperatures and humidity and get the weather forecast for the coming 12 to 24 hours.
ATTENTION
The time set by the time signal is the Central European Time! To use this clock e.g. in countries like UK, Ireland or Portugal select the manual setting mode.
FEATURES
Always have an eye on indoor and outdoor temperatures and humidity and get the weather forecast for the coming 12 to 24 hours.
ATTENTION
The time set by the time signal is the Central European Time! To use this clock e.g. in countries like UK, Ireland or Portugal select the manual setting mode.
FEATURES
- "Ultra Wide Angle" (UWA) Display 191 x 167mm/ 7.5” x 6.6”
- Large time display (digits 6cm in high)
- Radio controlled clock (self setting clock - adjusts for daylight savings time)
- Alarm
- Indoor & outdoor temperature
- Indoor & outdoor humidity
- 12-24 hours weather forecast
- Max. and min. temperature memory
- Wall or desk mounted
- Supports up to 3 remote sensors
SCOPE OF DELIVERY
- 1x weather clock
- 1x outdoor sensor
- 1x manual
| Colour: | black , silver , white |
|---|---|
| Display size (diagonal in cm): | 25.5 |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Humidity (inside) , Humidity (outside) , Outside temperature |
| Net Weight total (incl. accessories) (g): | 750 |
| Net weight (without access.) (g): | 687 |
| Number of sensors included in the package: | 1 |
| Sleeptimer: | No |
| Total height (mm): | 224 |
| Total length (mm): | 224 |
| Total width (mm): | 23 |
| Transmission frequency (MHz): | 433 |
| Type [Watches]: | Wall clock |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- Risk of physical injury! Children may only use the device under supervision. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a SUFFOCATION RISK! This device contains electronic parts powered by a power source (batteries). Never leave children unsupervised when handling the device! It must only be used as described in the instructions, otherwise, there is a RISK OF ELECTRIC SHOCK! Leaked battery acid can cause burns! Avoid contact of battery acid with skin, eyes, and mucous membranes. If the acid comes into contact, immediately rinse the affected areas with plenty of clean water and seek medical attention.
- FIRE/EXPLOSION RISK! Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
- NOTICE! Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not expose the device to shocks! Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when not in use for extended periods! Never recharge normal, non-rechargeable batteries! They may explode as a result of charging. The manufacturer is not liable for voltage damage caused by incorrectly inserted batteries!
Skip product gallery
Accessories
%
BRESSER Thermo-Hygro Sensor 3CH for ClimaTrend MC/TB and most products of the ClimaTrend Series
£28.37*
£28.99*
(2.14% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.70602009070500
Living room, bathroom, kitchen, wine cellar – there's no shortage of spaces where keeping an eye on the indoor climate makes sense. But one or two temperature and humidity sensors can quickly fall short. Add this neat little thermo-hygrometer sensor to your compatible weather station and keep tabs on every corner of your home.
FEATURESTemperature displayHumidity display3 channels settableRC frequency: 433 MHz
SCOPE OF DELIVERYRemote sensor
Available
Skip product gallery
Customers also bought
%
BRESSER Professional Rain Gauge
£61.49*
£74.99*
(18% saved)
For all ambitious amateur gardeners and meteorologists who are not satisfied with average values of the weather services, the digital wireless rain gauge from BRESSER offers the possibility of your own professional precipitation measurements.
The BRESSER Professional rain gauge shows the detailed rain measurement values in millimetres, but also the indoor and outdoor temperature is displayed precisely. The rain gauge has a radio distance of 150m outdoors. The radio range is achieved by the 868 Megahertz radio signal. The base station measures temperature and humidity. With the BRESSER Profi rain gauge, you can display the rainfall readings hourly, daily, weekly, monthly or as an annual value as well as the humidity. It is equipped with a graphical histogram.
FEATURES
Precipitation measurement
DCF radio clock reception and display
Wake-up call with snooze function (Snooze)
Outdoor temperature alarm (frost warning)
Outdoor temperature (in °C or °F)
Indoor temperature (in °C or °F)
Humidity inside and outside
Bar chart
SINCE-function for displaying the total precipitation from a certain point in time
Lowest and highest value display
Max-/Min-values storage
Backlight
Battery operated (Station: 2x AA; Sensor: 4x AA - not included!) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
SCOPE OF DELIVERY
Rain gauge
Base station
Detachable stand
Installation material
Operation manual
Available
Skip product gallery
Customers also viewed
BRESSER 60° wildlife observation camera, 5-20 MP, 20 m
£109.00*
The BRESSER wildlife camera allows you to keep an eye on your home, garden, local forest or other location when you're not in the vicinity. Featuring an invisible infrared LED light, it is ideal for both home surveillance and capturing fascinating images of wildlife. Thanks to the 60-degree PIR motion sensor with a 20 metre range, the camera is automatically triggered when it detects even the slightest of movements, and can capture images in less than 0.6 seconds. In addition, the wildlife camera comes with a 5 MP sensor that can take stunningly detailed images at resolutions of up to 20 MP (interpolated). It can also record Full HD videos.
Wildlife camera - keep an eye on animals and moving objects
The wildlife camera can accommodate a microSD card with a capacity of up to 32 GB (not included) so that you never miss out on the action. Once you've inserted the card, simply select the PIR sensitivity (high or low), place the device in the desired location using the mounting strap, and wait for something interesting to appear! The camera continues to function at night thanks to the infrared LED light, which enables the camera to take black and white photos. During the day, images are captured in colour. The camera also has a waterproof design (IP65) so that you can continue to observe the surroundings even in adverse weather conditions.
BRESSER wildlife camera - take automatic photos and Full HD videos, day or night!
FEATURES
Easy to use wildlife camera
20 MP photos* (5 MP sensor)
Video resolution: 1920 x 1080 (25 fps)
60-degree motion detection at a range of up to 20 metres
Colour images during the day, monochrome images at night
Invisible 850 nm infrared light for nighttime images
Field of view: 57.5°
Trigger speed:< 0.6 seconds
microSD card slot for cards with a capacity of up to 32 GB (microSD card not included)
Low power consumption and long battery life (up to 6 months in standby mode)
Waterproof (IP65)
Power supply: 8x AA batteries (not included)
PACKAGE CONTENTS
Digital wildlife camera
Mounting strap
Instruction manual
*Interpolated
Available
