BRESSER Climate Smile Thermo-Hygrometer Two-piece Set
Twice as good for your indoor climate: the two thermometers/hygrometers incl. comfort indicator allow you to keep track of the temperature and humidity in two rooms at the same time.
- Thermometers/hygrometers in a handy two-piece set
- Measures the indoor temperature (°C/°F) and humidity
- With indoor climate comfort indicator, DCF time and date
- Dimensions: 110 x 13 x 94 mm / Weight: 50 g
- Includes: 2x thermometer/hygrometer, batteries, instruction manual
- Required batteries: 4x CR2032 (included)
- Mounting type: stand and wall mount
£28.99*
Available, delivery time: 10-12 working days
Product number:
7000017
EAN:
4007922077024
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Climate Smile Thermo-Hygrometer Two-piece Set"
Double check: The BRESSER Climate Smile thermometer/hygrometer two-piece set gives you an easy overview of indoor temperature and humidity in two rooms. If our indoor climate is as it should be, we'll feel comfortable and well within our own four walls, in the office or other favourite rooms. The indoor air can also impact our health. If indoor air remains too humid for too long, there's a risk of an uninvited and unwanted guest - mould. By contrast, excessively dry air, such as in overheated rooms, can quickly make us feel uncomfortable. That's why it pays to keep a close eye on the indoor climate with the BRESSER thermometer/hygrometer - for comfortable and healthy living and working!
The ideal indoor climate with a thermometer/hygrometer and a smile
The handy temperature and humidity gauges show precise values on the clearly structured display whenever you need them. Sometimes, all you want to know is when you need to ventilate your home. Which is why our measuring instruments are fitted with an indoor climate indicator. If the smiley gives you a smile, you know that everything's ok. Otherwise, it's time to ventilate the room. In addition, the screen also shows the current time. Summer time or winter time, when do the clocks need to change again? With the DCF time signal, you don't need to worry as the time is adjusted automatically. There is also a practical date function at the press of a button.
Breathe easily with the BRESSER Climate Smile thermometer/hygrometer two-piece set for the perfect indoor climate!
FEATURES
DELIVERY CONTENT
The ideal indoor climate with a thermometer/hygrometer and a smile
The handy temperature and humidity gauges show precise values on the clearly structured display whenever you need them. Sometimes, all you want to know is when you need to ventilate your home. Which is why our measuring instruments are fitted with an indoor climate indicator. If the smiley gives you a smile, you know that everything's ok. Otherwise, it's time to ventilate the room. In addition, the screen also shows the current time. Summer time or winter time, when do the clocks need to change again? With the DCF time signal, you don't need to worry as the time is adjusted automatically. There is also a practical date function at the press of a button.
Breathe easily with the BRESSER Climate Smile thermometer/hygrometer two-piece set for the perfect indoor climate!
FEATURES
- 2x thermometer and hygrometer in one device
- Indoor climate indicator as a smiley
- Indoor temperature (in °C/ °F)
- Relative humidity (indoor, in %)
- Time by DCF time signal (12 or 24 hr display)
- Date
- Required batteries: 4x CR2032 (included)
- Mounting type: stand and wall mount
DELIVERY CONTENT
- 2x thermometer/hygrometer
- 4x CR2032 batteries
- Instruction manual
| Assembly required: | No |
|---|---|
| Batteries included: | Yes |
| Batteries required: | Yes |
| Colour: | anthracite |
| Display height (cm): | 7.4 |
| Display size (diagonal in cm): | 10.8 |
| Display width (cm): | 8 |
| Extended warranty (years): | 5 |
| Features: | DCF time signal , Indoor climate indicator |
| Height of the largest digit on the display (cm): | 2.5 |
| Indoor sensor humidity measuring range from (%): | 20 |
| Inside temperature (°C) from: | 0 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement accuracy inside humidity (%): | ± 10 |
| Measurement accuracy inside temperature (°C): | ± 1 |
| Measurement function: | Humidity , Temperature |
| Measurement range for indoor humidity sensor up to (%): | 95 |
| Net Weight total (incl. accessories) (g): | 179 |
| Net weight (without access.) (g): | 174 |
| Number of articles: | 2 |
| Power supply unit included: | No |
| Total height (mm): | 94 |
| Total length (mm): | 100 |
| Total width (mm): | 12 |
| Typ [Batteries]: | CR2032 |
| Type of mounting: | Stand , Wall bracket |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Customers also bought
BRESSER CO² Air Quality Monitor Smile
£122.99*
Endless meetings, urgent work emails, looking after the kids, cleaning the flat… during our hectic lifestyles, it's easy to forget about regular ventilation. Even though we know better: a high CO2 concentration can affect our health and wellbeing. The BRESSER CO2 air quality monitor Smile will show you when it's time to let some fresh air into your home or office. Simply have a quick look at the intuitive LCD display to keep an eye on the CO2 concentration, temperature and humidity. You don't need to worry about remembering what constitutes a critical carbon dioxide level - the intuitive graphical display with a linear scale and smiley face will show you the quality of the air in your surroundings. The measurements are precise, with high resolution and fast. Ventilation alarmThe practical carbon dioxide alarm reminds you when you need to let in some fresh air. If the default setting is different to your ideal indoor climate, you can configure your own limit up to a maximum of 5000 ppm. The alarm function can then be activated with a simple button press. If the preset limit is exceeded, the alarm will sound at a varying intensity depending on the CO2 concentration. The display will also show a flashing arrow symbol to remind you to open the windows. Humidity is also an important factor, as high humidity levels can cause mould to form. You can also set your own visual alarm for this reading so that you will know whether the air in the room is too dry or too moist. If you want to see more than just the current readings, there is also a practical memory function that displays the maximum and minimum values for the last 24 hours as well as the average values from the last 15 minutes and 8 hours for carbon dioxide concentration, temperature and humidity. The device is powered by a power adapter to enable continuous operation. The BRESSER CO2 Air quality monitor Smile - the perfect solution for busy fresh air fans! FEATURESSimultaneous display of CO2 concentration, temperature (°C / °F) and humidity Colour LCD display, clear and intuitive Graphical display of current CO2 concent Carbon dioxide alarm functions: Humidity alarm function Memory function High precision, high resolution, rapid response time Dimensions: 123 x 110 x 32 mm Powered by power adapter, long-term continuous operation possible DELIVERY CONTENTCO2 air quality monitor Power adapter Instruction manual
Available
BRESSER ClimaTrend Hygro Indicator 3-piece Set Thermo-Hygrometer
£11.99*
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 3 piece ClimaTemp Thermo Hygrometer Indicator you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom and children's room). Next to the exact measured values for the room temperature (C°) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY3x Thermo / Hygro Station3x CR2032 batteriesmanual
Available
