Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER Additional / Spare Base Station for Weather Station 7003210

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
  • Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
  • Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
  • Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Compatible Sensors

%
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

£146.63* £146.99* (0.24% saved)
%
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Incoming

£103.11* £103.99* (0.85% saved)
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

£42.57* £42.99* (0.98% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.03* £122.99* (0.78% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Incoming

£33.06* £33.99* (2.74% saved)
%
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Incoming

£42.57* £42.99* (0.98% saved)
Skip product gallery

Customers also bought

%
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£263.93* £263.99* (0.02% saved)
BRESSER 7-in-1 Wi-Fi Weather Station 4CAST with 4-Day Forecast
No more getting caught in the rain: The BRESSER 7-in-1 Wi-Fi Weather Station 4CAST with 4-Day Forecast will give you advanced warnings about unsettled weather. Thanks to the built-in Wi-Fi function, the weather station can retrieve a wide range of data from the ProWeatherLive platform, which is used to produce a 4-day weather forecast - including high and low temperature as well as chance of rainfall. As well as weather forecast symbols, the weather station also shows all the data from your 7-in-1 wireless sensor, including the temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. The data can be transmitted at a range of up to 150 metres and is displayed on the base station's stylish colour display.What's more, you can also share your local readings on ProWeatherLive so that other users can view your data. Data uploaded to ProWeatherLive can be accessed remotely using the mobile app. You can also connect the weather station to the Austrian weather portal AWEKAS so that you can transmit your weather data free of charge to your smart home system. To upload your readings, simply configure the settings as described in the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/  Stay up-to-date with the weather - with the 7-in-1 Wi-Fi weather station  Have you ever looked at the thermometer and wondered why you feel so cold or sweaty? There's a simple explanation: The perceived temperature is also affected by the wind and the humidity. This Wi-Fi weather station determines the perceived ('feels like') temperature using the measured readings. When the sun is shining, it's easy to forget about the risk of sunburn. The weather station displays the sunburn time in minutes so that you know how long you can sunbathe for safely. It also displays the current wind speed using the Beaufort scale. In addition to a weather forecast and current readings, you can also keep track of recent trends by saving the maximum and minimum values from a certain point in time. Alternatively, you can display the daily max/min values with a simple button press. As well keeping track of the outdoor conditions, you can also view the indoor humidity and temperature to ensure that you maintain an optimal indoor climate. Based on these precise measurements, the Wi-Fi weather station displays the comfort level using a small smiley symbol. You can then take effective measures to prevent the risk of mould or dry air. Feature-packed weather station with time and date display This Wi-Fi weather station with a rain and wind gauge does much more than just tell you about the latest weather conditions. It also displays the time, date, day of the week and moon phase, and is ideal as a bedside clock, featuring an integrated alarm function to wake you up in the mornings. If you need an extra few minutes in bed, simply press the snooze button to silence the alarm for five minutes. The weather station also features an ice/frost warning function that sounds the alarm 30 minutes earlier when the outdoor temperature drops below freezing. Keep ahead of the weather with the BRESSER 7-in-1 Wi-Fi Weather Station 4CAST with 4-Day Forecast! If the 7 measurements provided by the outdoor sensor are not enough to satisfy your meteorological needs, you can purchase additional sensors to take a wider range of measurements. BASE STATION FEATURES 4-day weather forecast (today and 3 following days) with symbols Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground and Weather Cloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Wind direction display (current and predominant, 16 directions) UV level display Light intensity display Sunburn time display (in mins) Precipitation display (hourly, daily, weekly, monthly, total precipitation) Air pressure Weather data calibration Weather alert settings via ProWeatherLive server Maximum/minimum value memory (daily/total) Colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter, CR2032 back-up battery (not included) Dimensions: 187 x 118 x 18 mm   Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: Up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 390 x 465 x 174 mm DELIVERY CONTENT Base station Wireless sensor Power adapter Instruction manual

Available

£112.23*
%
BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station with Various Display Modes
What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual

Available

£377.45* £453.99* (16.86% saved)
Skip product gallery

Customers also viewed

BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT50007003300 (up to lot number 1605516)7003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

Available

£134.00*