BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000

If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles. Monitor your indoor climate with an additional ClimateScout base station In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits. Radio-controlled clock In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen. View your weather data in an extra room with this additional base station! BASE STATION FEATURES Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency Clear, professional display with time and comprehensive weather information Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours) Room climate indicator Maximum and minimum value alarm Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time Alarm with snooze function and frost warning Time, calendar, day of the week and moon phase display Min./max. memory (up to 24 hours) Backlight Displays the graphical weather trend (12 hours) Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2) Displays the Beaufort index (scale for measuring wind speed) Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator Weather index display for dewpoint, windchill factor and heat index Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT) Can be wall-mounted or placed on desktop Base station dimensions: 180 x 135 x 22 mm (W x H x D) Display size: 125 x 77 mm (W x H) Power supply: 4x AA (not included) DELIVERY CONTENT Additional base station External sensor not included! Instruction manual

An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station. A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing. The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation. All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.  FEATURES (main unit):Clear professional display for time & full weather information Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF transmission frequency RCC time synchronization & automatic switch between standard and daylight saving time (DCF) For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset functionBuzzer alarm clock with ice pre-alert function Display time, calendar, weekday & Moon phaseAble to set the moon phase display for Northern / Southern hemisphere Buzzer alarm clock with ice pre-alert function Indoor temperature (°C/°F) & humidity readings with comfort indication & trend Outdoor temperature (°C/°F) & humidity readings with trend Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level Real time & dominant wind direction in 360° & 16-direction resolution UV index (0 – 16) Light intensity reading (Klux, Kfc, W/m2) Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Barometric pressure in relative or absolute readings (hPa, inHg, mmHg) Weather index for outdoor feels like, heat index, wind chill, dew point readings Max / Min memory records & past 24hrs hourly record Hi / Lo alert setting (indoor/ outdoor temperature & humidity) Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop) Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT) Amber backlight Long-range transmission up to 150m (450 ft.) Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included) Wall mount/ desktop usage Product size: Main unit: 180 x 136 x 23 mm (W x H x D) Display VA size: 125x77mm (W x H) Battery requirements: Main unit: 4x AA ; Sensor 3x AA  (Not included)FEATURES (7-in-1 SENSOR)Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity MeasurementUp to 150 m transmission range using 868 MhZ transmission frequencyShould be placed in an unobstructed location so that sun and rain data can be used properlyCan be mounted on wall or post using the included adapterProduct size: Sensor: 344 x 394 x 136 mm (W x H x D) SCOPE OF DELIVERY1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)1x wireless 7-in-1 Professional Weather Sensor including mounting stand

NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

The soft padded Vixen accessory bag can be attached to a tripod, keeping your accessories close at hand. The bag is exactly the right size for the Polarie U Star tracker. But also other accessories, such as a camera lens, batteries or the remote control of your camera can be stored safely and within reach in this soft bag. The neoprene material, which absorbs shocks excellently and offers good thermal insulation, protects your accessories extremely well. and protects your batteries and USB battery packs from extreme cold. FEATURESAccessory bag for attaching to a tripod Perfect fit for the Polarie U Star Tracker Suitable to keep all kinds of accessories clos at hand Material: neoprene, polyester Dimensions: 11 x 13 cm Weight: 95 g SCOPE OF DELIVERYTripod accessory bag Fastening strap

The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.FEATURESColour-display5-in-1 outdoor multi sensorInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trend display (12 hours)Beaufort index (scale for the classification for wind speeds)Precipitation rate with history (day/week/month)Air pressure with history (24 hours)Heat indexDew pointRadio controlled time and date settingPhases of the moonAlarm functionIce/frost warningHi/Lo-AlertMin/Max memory (up tp 24 hours)LED background light, amberSCOPE OF DELIVERYBase station5-in-1 Multisensor with mounting materialPower plugManual

What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual