Two in one: the additional base station for your weather station gives you updates on the current weather status in an additional room, including room climate data.
- Base station for WiFi ClearView Weather Station (7002586)
- Displays a wide range of measurements and historical data
- WiFi connection, alarm function and frost/ice warning
- Dimensions: 240 x 140 x 20 mm; Weight: 450 g
- External sensor not included!
- Time and date setting, LED backlight
- Integrated WiFi transmission to AWEKAS
- Indoor sensor: Indoor temperature, humidity and air pressure
- Room climate indicator
- Maximum and minimum value alarm function
£150.99*
Available, delivery time: 10-12 working days
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor FormFAQ - Frequently Asked Questions
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Spare Base Station for Weather Station 7002586"
Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air
Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself.
On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller.
Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location.
FEATURES
- 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information
- WiFi connection with internet time synchronisation
- Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz
- Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud
- Integrated sensor for indoor temperature (°C/°F), humidity and air pressure
- External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity
- Precise wind direction display (16 directions)
- Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow)
- Beaufort index display (scale for measuring wind speed)
- Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation)
- Room climate indicator Weather index display for dewpoint, windchill factor and heat index
- Time, calendar, day of the week and moon phase display
- Alarm function with snooze button
- Ice/frost alarm
- Min./max. memory (up to 24 hours)
- Alarm with LED indicator
- 3 different display brightness levels High/Low/Off
- 7 languages for days of the week
- Firmware updates supported
- Supports up to 7 additional wireless sensors (optional) (item no. 7009999)
- Integrated WiFi transmission to AWEKAS
SCOPE OF DELIVERY
- Base station
- Power adapter
- External sensor not included!
- Instruction manual
| 1) Footnote: | Batteries user supplied, unless not content of delivery. |
|---|---|
| Assembly required: | No |
| Batteries included: | No |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | grey |
| Display height (cm): | 9.3 |
| Display size (diagonal in cm): | 21.3 |
| Display width (cm): | 19.2 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , Backlight , Compatible with online weather platforms , DCF time signal , High/low alarm , History data storage , Moon phases , Storm warning , Temperature alarm , WIFI , Weather forecast , multicolour display |
| Height of the largest digit on the display (cm): | 1.5 |
| Inside temperature (°C) from: | -40 |
| Inside temperature (°C) up to: | 70 |
| Lighting 5): | Backlight |
| Material: | Plastic |
| Measurement function: | Barometric pressure , Humidity (inside) , Inside temperature |
| Net Weight total (incl. accessories) (g): | 508 |
| Net weight (without access.) (g): | 450 |
| Number of sensors included in the package: | 0 |
| Power supply 1): | 1.5V Batteries |
| Power supply unit included: | No |
| Smartphone app: | No |
| Total height (mm): | 20 |
| Total length (mm): | 140 |
| Total width (mm): | 240 |
| Transmission frequency (MHz): | 868 |
| Transmission range (m): | 150 |
| Type of mounting: | Stand |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.