Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER additional / spare base station for weather station 7002585

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

%
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER 5-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual

Available

£74.73* £74.99* (0.35% saved)