Whether as a replacement or an add-on – with the base station for your existing weather station, you can always keep track of all the key data. (compatibility see below)
- Displays a wide range of measurements and historical data
- Wake/alarm function, frost/ice warning, memory
- Dimensions: 138 x 202 x 38 mm / Weight: 515 g
- Delivery contents: Base station with stand and power adapter
£99.00*
Available, delivery time: 10-12 working days
Product number:
7902550
EAN:
4007922064635
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Spare Base Station for Weather Station 7002550CM3000"
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.
- 15200
- 15201
- 7002510 (from lot number 1181632)
- 7002511 (from lot number 1199241)
- 7002512 (from lot number 1233002)
- 7002513
- 7002525
- 7002550CM3000
- 7002550GYE000
- 7002550MGU000
- 7002550QT5000
- 7002571
- 7002580
- 7002581
- 7002585
- 7002590
- 9080500
- 9602510
- 7002550000000
- WSX1001CM3LC1
- WSX1001CM3LC2
- WSX1001000000
Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.
FEATURES
- Base station for 5-in-1 multisensor and other weather stations
- Indoor temperature (°C/°F) and humidity
- Graphical weather trend display (12 hours)
- Beaufort index (scale for measuring wind speed)
- Rainfall with history (day/week/month)
- Air pressure with history (24 hours)
- Heat index
- Dewpoint
- Radio-controlled time and date settings
- Phases of the moon
- Alarm function
- Ice/frost warning
- Min./max. memory (up to 24 hours)
SCOPE OF DELIVERY
- Base station
- Stand
- Power adapter
| Assembly required: | No |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black |
| Display height (cm): | 8.7 |
| Display size (diagonal in cm): | 18.7 |
| Display width (cm): | 16.3 |
| Extended warranty (years): | 5 |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.4 |
| Material: | Plastic |
| Measurement function: | Humidity , Temperature |
| Net Weight total (incl. accessories) (g): | 565 |
| Net weight (without access.) (g): | 505 |
| Number of sensors included in the package: | 0 |
| Power supply 1): | Batteries , Mains adapter |
| Power supply unit included: | Yes |
| Smartphone app: | No |
| Total height (mm): | 38 |
| Total length (mm): | 138 |
| Total width (mm): | 203 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER 5-in-1 Outdoor Sensor
£74.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual
Available
Skip product gallery
Customers also bought
%
BRESSER 5-in-1 Comfort Weather Station with Colour Display
From
£79.00*
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.FEATURESColour-display5-in-1 outdoor multi sensorInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trend display (12 hours)Beaufort index (scale for the classification for wind speeds)Precipitation rate with history (day/week/month)Air pressure with history (24 hours)Heat indexDew pointRadio controlled time and date settingPhases of the moonAlarm functionIce/frost warningHi/Lo-AlertMin/Max memory (up tp 24 hours)LED background light, amberGood to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.SCOPE OF DELIVERYBase station5-in-1 Multisensor with mounting materialPower plugManual
Available
BRESSER Wi-Fi Colour Weather Station with 5-in-1 Professional Sensor
£159.99*
FEATURES5.7'' colorful display for time and detailed weather informationWIFI connection with internet time synchronizationReceives weather data from 5in1 profi sensor and from wireless thermo-hygro sensor via 868 MHz transmissionPublish local weather station data on weather underground and weather cloudDisplays time, calendar, weekday and moon phaseAlarm clockIce pre-alert functionIndoor temperature (°C/°F) and humidity with comfort indicationOutdoor/Channel’s temperature (°C/°F) and humidity readingsGust or average wind speedWind direction (16-direction indicator)Rain rate (hourly, daily, weekly, monthly, total rainfall)Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)Smart outdoor “Feels like” sensation readingWeather index for outdoor feels like, dew-point, Wind chill, Heat indexMax/Min memory records and past 24 hours (hourly record)Hi/Lo alert with flash LED indicatorWeather calibration (on set-up UI)3-mode brightness: Hi / Lo / Off7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)Support firmware update (TBC)Support a wireless 5-in-1 professional weather sensor (Included)Support up to 7 pcs wireless extra sensors (Optional) (item no. 7009999)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
DELIVERY SCOPEMain unitProfessional 5in1 sensor incl. mounting material100-240V/50 Hz power adapter and cable
Available
%
BRESSER ClimaTemp Thermo-Hygrometer 6-piece Set
From
£37.99*
The ideal room climate not only has positive effects on our well-being, it is also good for our health. The two critical values which determine the room climate are temperature and relative humidity.If for instance the humidity is too low the effects can be burning eyes, chapped lips as well as dry nasal mucosa, which reduces our ability to provide protection against inhaled pathogens.
On the other hand, if the humidity is too high there is a risk of mould formation. This can also be prevented thanks to the indicator.
With the practical 6 piece ClimaTemp Hygro Indicator Set Thermo-/Hygrometer you now have the control over the room climate in all the rooms you spend most of your time in (e.g. living room, bedroom, kitchen, office and children's rooms). Next to the exact measured values for the room temperature (°C) and humidity (%) the indicator also shows in symbolic form, whether these values are within the recommended range or if there is a need for action. FEATURESTemperature display in °CAir humiditySymbolic room climate indicatorEarly prevention of mouldMounting type: stand, wall mount and magnetSCOPE OF DELIVERY6x Thermo-/Hygro Station6x CR2032 batteriesmanual
Available
BRESSER Additional / Spare Base Station for Weather Station 7002580
£103.99*
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Base station for 5-in-1 multi-sensor and other weather stations Indoor temperature (°C/°F) and humidity Displays the graphical weather trend (12 hours) Beaufort index (scale for measuring wind speed) Rainfall with history (day/week/month) Air pressure with history (24 hours) Heat index Dewpoint Radio-controlled time and date settings Phases of the moon Alarm function Ice/frost warning Min./max. memory (up to 24 hours) SCOPE OF DELIVERY Base station Stand Power adapter
Available
Skip product gallery
Customers also viewed
BRESSER 5-in-1 Outdoor Sensor
£74.99*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.1520015201156597002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002585700259070026107002620908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the WiFi colour weather centre Measures wind speed, wind direction, humidity, external temperature and precipitation Transmission frequency: 868 MHz Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Multifunctional external sensor Mounting materials No base station included Instruction manual
Available
%
BRESSER 5-in-1 Comfort Weather Station with Colour Display
From
£79.00*
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.Furthermore the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the “moonstruckers” also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.FEATURESColour-display5-in-1 outdoor multi sensorInside temperature (°C/°F) and humidityOutside temperature (°C/°F) and humidityWind direction and speedGraphical weather trend display (12 hours)Beaufort index (scale for the classification for wind speeds)Precipitation rate with history (day/week/month)Air pressure with history (24 hours)Heat indexDew pointRadio controlled time and date settingPhases of the moonAlarm functionIce/frost warningHi/Lo-AlertMin/Max memory (up tp 24 hours)LED background light, amberGood to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.SCOPE OF DELIVERYBase station5-in-1 Multisensor with mounting materialPower plugManual
Available
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
£462.99*
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000
Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
8-day weather forecast (today and 7 following days)
Extra large 48.3 cm (19”) colour display with slim bezel
Wide-angle display for easy reading of measurements when wall-mounted
Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud
Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server
Local visibility and cloud cover via ProWeatherLive server
Indoor temperature (°C/°F) and humidity
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Gusts and average wind speed
Beaufort index (scale for measuring wind speed)
Sunburn time (in mins)
Air pressure
Weather data calibration
Weather alarm function via ProWeatherLive server
Maximum/minimum value memory (daily/total)
Backlight with automatic dimming function
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
Alarm with ice/frost warning
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Mains plug (included), CR2032 back-up battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER MikroCam mini Full HD HDMI microscope camera
£279.99*
The MikroCam MINI Full HD HDMI is a very compact HDMI camera. No PC or laptop is needed to use it, simply connect to a monitor, TV, beamer or smartboard. This makes the camera especially suited for teaching. As a plus, you can also mount the BRESSER HDMI display (item no. 5914120) directly on the camera.
Connection via HDMI is easy and the camera is ready to go instantly. No software installation, PC setup etc. is necessary. The lossless data transfer ensures a good image quality and the image is lag free and with a constant high framerate of 60fps. This is especially helpful when digitizing a microscope workplace in QC or production
With the included mouse, you can control the camera via 3 distinctive on screen menus (camera control, settings, measurements). To calibrate measurements, please add a calibration slide (e.g. item no. 5916720).
The camera is well suited for presentations, lectures etc. because upon startup it is working directly in auto mode with no user input. The camera does not have a start button, it is working directly after power up. Menus and mouse icon are not visible if the mouse is not connected.
Please note that this camera does not allow direct PC connection via USB. For this, an HDMI-to-USB video capture device is required. The USB port is used for mouse control and for connecting a USB stick to save images.
FEATURES
HDMI connection for monitor, beamer or smartboard
C-mount adapter thread enables connection to various microscopes (independent of brand / manufacturer)
Compatible with USB sticks, maximum storage capacity: 512 GB
No PC or laptop necessary
SCOPE OF DELIVERY
MikroCam MINI Full HD HDMI with c-mount
AC adapter (12 V / 2A), EU
USB mouse
HDMI cable (length appr. 1.5 m)
Available
