Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER Additional / Spare Base Station for Weather Station 15198

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

%
BRESSER 8-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151971519815199 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£138.33* £147.03* (5.92% saved)
BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

£178.79*
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER 7-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700330070033607003400700350070035107003600CM30007003600GYE0007003600QT50007004406908060070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

£93.65* £93.99* (0.36% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

£146.63* £146.99* (0.24% saved)
%
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Pre-order

£103.11* £103.99* (0.85% saved)
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

£42.57* £42.99* (0.98% saved)
%
BRESSER CO2 Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 Add a breath of fresh air to your home or office just when you need it with the BRESSER CO2 Sensor. We all need healthy indoor air and enough oxygen to feel well and stay productive. That’s why it’s so important to air our spaces at regular intervals. The integrated display on the CO2 sensor quickly tells you when it’s the right time – you’ll see the carbon dioxide reading and level to give you an indication of the current air quality. The sensor also works well as an extension for a compatible weather station from BRESSER (not included). Connection is established quickly, and you’ll also be able to see CO2 levels on the screen. As a stand-alone solution or an extension for your weather station – ensure optimal fresh air supply with the BRESSER CO2 Sensor. FEATURES Wireless sensor for CO2 measurement Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying the current CO2 reading and level With battery level indicator Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) 4 available channels Range: up to 150 m Size: 82 x 120.5 x 41 mm (W x H x D)  SCOPE OF DELIVERY CO2 Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station and app not included! Instruction manual

Pre-order

£140.95* £140.99* (0.03% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.03* £122.99* (0.78% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199700261070026207003520 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£165.00*
%
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

£42.57* £42.99* (0.98% saved)
Skip product gallery

Customers also bought

BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor
Stay one step ahead of the weather with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor. Thanks to the large, clear 10-inch (25.4 cm) display, you’ll have all the key data in front of you at a glance. Standout features include the detailed forecast and the WBGT heat stress level, helping you stay safe and comfortable on hot days. And with a Wi-Fi connection, your personalised weather updates are always within easy reach - wherever you are. Comprehensive forecasts straight to your screen Planning a barbecue or a family outing? The local 24-hour and 14-day forecasts, including maximum and minimum temperatures and chance of rain, powered by the ProWeatherLife server, make it easy to pick the perfect time. This weather station with outdoor sensor also provides internet-based data on visibility and cloud cover. Want to share your readings? Simply publish them via Wi-Fi to ProWeatherLive or Weathercloud - and connect with the global weather community. 8-in-1 outdoor sensor: compact, precise, reliable This clever all-rounder measures temperature, humidity, wind speed and direction, rainfall, UV level, light intensity and WBGT. The large adjustable solar panel keeps it running sustainably, while 3 AA batteries (not included) step in when sunlight is limited. With a range of up to 150 m and a durable, weatherproof housing, you can set it up just where you need it for the most accurate results. WBGT - stay safe in the heat When the mercury soars, heat can take a toll on your body. That’s where the Wet Bulb Globe Temperature (WBGT) comes in. It combines three factors - air temperature, mean radiant temperature and wet-bulb temperature - to calculate heat stress accurately. If the wet-bulb temperautre value stays above 35 °C, your body starts absorbing heat from its surroundings, which can quickly become dangerous. Whether you’re training, gardening or enjoying the outdoors, this digital weather station gives you the exact WBGT reading at all times. The heat stress index also provides a simple warning, so you know when to take a break. Indoor climate check included A healthy climate isn’t just for outside. The base station also measures indoor temperature and humidity via its built-in thermometer and hygrometer. The handy comfort indicator lets you know straight away whether your home or office needs airing. It also tracks air pressure, a reliable sign of changing weather. Detailed weather analysis with alerts This garden weather station doesn’t stop at the basics. It also calculates feels-like temperature, heat index, dew point and wind chill, plus shows you wind strength using the Beaufort scale. The max/min memory highlights local weather trends, and with ProWeatherLive alerts you’ll always be prepared for what’s coming. With its rain gauge and wealth of features, it’s like having your own personal weather assistant. Secure your professional weather overview now - with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor! FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the 8-in-1 solar-powered outdoor sensor(temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Compatible with additional optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detectors and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Powered by large, adjustable solar panel Back-up power with 3x AA batteries (not included) Weatherproof housing Range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£264.00*
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
BRESSER HCHO + VOC Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700 If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air. Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well. Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station. FEATURES Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds) Can be used alone or with select BRESSER weather stations Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content With battery level indicator 4 available channels Range: up to 150 m Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included) Size: 82 x 120.5 x 43 mm SCOPE OF DELIVERY HCHO + VOC Sensor 3x AA rechargeable batteries, 1.2 V USB cable Weather station not included Instruction manual

Available

£178.79*
BRESSER WIFI Gateway Weather Station El Niño with 7-in-1 Professional Sensor
With the modern BRESSER WIFI Gateway Weather Station El Niño, you can monitor your local weather and indoor climate no matter where you are! The measurements from the high-quality 7-in-1 sensor are automatically uploaded to your preferred weather platform via the gateway. Whether you're at work, on holiday, or on your way home, your weather data is always just a click away through ProWeatherLive, Weather Underground, Weathercloud, and others. Your garden’s weather expert: the 7-in-1 outdoor sensor The BRESSER 7-in-1 wireless sensor provides detailed and accurate data straight from your property. Whether it’s temperature, humidity, wind speed, wind direction, rainfall, UV levels, or light intensity – this versatile device delivers all the key information quickly and reliably. You’ll know right away whether it’s time to fetch a sunhat or a raincoat. Perfect comfort with precise indoor climate data In addition to outdoor weather, your indoor climate is essential for your wellbeing. That’s why the WIFI Gateway Weather Station El Niño keeps you informed of indoor temperature, humidity, and air pressure. These values help you optimise the indoor climate at home, work, or anywhere else, ensuring a healthy and comfortable environment. The data is also automatically uploaded to your chosen weather platform, allowing you to stay informed no matter where you are. Maximum flexibility for your weather station with the gateway Build your own professional weather station with the WIFI gateway and a range of optional sensors. With the addition of up to 7 extra thermo-hygro sensors (not included), you can create the perfect indoor climate in every room of your home. Up to 7 optional water leak detectors (not included) can alert you in case of leaks. You can also connect an optional lightning sensor and air quality monitors (not included) to the gateway. Stay on top of your local weather and indoor climate at any time with the expandable BRESSER WIFI Gateway Weather Station El Niño. FEATURES WIFI GATEWAY Compact WIFI gateway weather station for automatically uploading comprehensive weather information to online platforms For publishing weather data on ProWeatherLive (includes 3-year-membership), Weather Underground, Weathercloud, and one additional platform Data always available online, anywhere Measures indoor temperature, humidity, and air pressure Easy configuration of WIFI, time, weather platform, as well as calibration and firmware updates via the WSLink app Expandable with a wide range of optional sensors (not included): Up to 7x Thermo-hygro Sensor (Item no.: 7009971), Soil Temperature and Moisture Meter (Item no.: 7009972), or Pool Thermometer (Item no.: 7009973) (not included) Up to 7x Water Detectors (Item no.: 7009975) (not included) 1x Lightning Detector (Item no.: 7009976) (not included) 1x PM2.5/10 Air Quality Meter (Item no.: 7009970) (not included) 1x CO2 Sensor (Item no.: 7009977) (not included) 1x HCHO + VOC Sensor (Item no.: 7009978) (not included) Mounting: Stand, wall mounting Power supply: USB cable with power plug FEATURES 7-IN-1 SENSOR Measurement of temperature and humidity Measurement of wind speed, wind direction, and rainfall Measurement of UV levels and light intensity Waterproof housing Range: up to 150 m Power supply: 3 x AA batteries (not included) SCOPE OF DELIVERY Gateway 7-in-1 sensor USB cable USB power plug User manual

Available

£169.33*
%
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

£42.57* £42.99* (0.98% saved)
Skip product gallery

Customers also viewed

%
NATIONAL GEOGRAPHIC Wi-Fi Colour Weather Station with 7-in-1 Sensor
The new NATIONAL GEOGRAPHIC WIFI Colour Weather Station with 7-in-1 professional outdoor sensor offers a comprehensive information service. The multifunctional outdoor sensor can easily be installed using the installation accessories supplied! The sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, amount of precipitation, as well as UV level and light intensity to the base station via 868 MHz frequency. The console's clearly structured 5.7" colour display shows a large variety of measured local data as well as your station's historically measured values. A reliable local weather forecast is calculated and displayed using weather symbols on the console display for the upcoming 12h. The WIFI function allows users to share their local data via online platforms such as "AWEKAS", ''Weather Underground'' or ''Weather Cloud''. Furthermore, the WIFI function enables Internet time synchronization and firmware updates.  You can set a temperature alarm for maximum and minimum values, which triggers both an acoustic and a light signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated to warn of frost/ice. A poor indoor climate often poses health risks, especially for children and older people. The BRESSER WIFI colour Weather Station offers a smart feature for this as well. The indoor climate indicator always informs about the indoor climate by means of a symbol. For all ''moon addicts'' the different phases of the moon are also displayed. An alarm clock with snooze function is also included in the range of functions.  You can transmit your weather data to the European Weather platform AWEKAS where you can also retrieve your weatherdata worldwide. Transmit data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control system, depending on which sensors you have additionally purchased. This can be done easily and free of charge via our partner AWEKAS. This can be set up under the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/  PROPERTIES 5.7'' colour display for detailed time and weather information WIFI connection with Internet time synchronisation Receives weather data from the 7-in-1 professional sensor and the wireless thermo-hygro sensor via 868 MHz Publish the local data of your weather station on the internet via websites such as AWEKAS, Weather Underground and Weather Cloud Display of time, calendar, weekday and moon phase Wake-up function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort display Outdoor temperature (°C / °F) and humidity display Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact indication based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index via the Feels Like functionMin/max value memory (up to 24 hours) Alarm with LED display 3 different display brightness levels: High / Low / Off Support of firmware updates Security type: supports WPA3 encryption as of firmware 2.0Support a 7-in-1 professional multi-sensor (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Easy set-up and updates via WSLink appIntegrated WIFI transmission to AWEKAS Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.SCOPE OF SUPPLY Base station (Console)Professional outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cableBatteries are not included

Available

£169.33* £198.99* (14.91% saved)
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002541700322070032307003240700350070035107003700700380070039009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£87.00*
BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor
Stay one step ahead of the weather with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor. Thanks to the large, clear 10-inch (25.4 cm) display, you’ll have all the key data in front of you at a glance. Standout features include the detailed forecast and the WBGT heat stress level, helping you stay safe and comfortable on hot days. And with a Wi-Fi connection, your personalised weather updates are always within easy reach - wherever you are. Comprehensive forecasts straight to your screen Planning a barbecue or a family outing? The local 24-hour and 14-day forecasts, including maximum and minimum temperatures and chance of rain, powered by the ProWeatherLife server, make it easy to pick the perfect time. This weather station with outdoor sensor also provides internet-based data on visibility and cloud cover. Want to share your readings? Simply publish them via Wi-Fi to ProWeatherLive or Weathercloud - and connect with the global weather community. 8-in-1 outdoor sensor: compact, precise, reliable This clever all-rounder measures temperature, humidity, wind speed and direction, rainfall, UV level, light intensity and WBGT. The large adjustable solar panel keeps it running sustainably, while 3 AA batteries (not included) step in when sunlight is limited. With a range of up to 150 m and a durable, weatherproof housing, you can set it up just where you need it for the most accurate results. WBGT - stay safe in the heat When the mercury soars, heat can take a toll on your body. That’s where the Wet Bulb Globe Temperature (WBGT) comes in. It combines three factors - air temperature, mean radiant temperature and wet-bulb temperature - to calculate heat stress accurately. If the wet-bulb temperautre value stays above 35 °C, your body starts absorbing heat from its surroundings, which can quickly become dangerous. Whether you’re training, gardening or enjoying the outdoors, this digital weather station gives you the exact WBGT reading at all times. The heat stress index also provides a simple warning, so you know when to take a break. Indoor climate check included A healthy climate isn’t just for outside. The base station also measures indoor temperature and humidity via its built-in thermometer and hygrometer. The handy comfort indicator lets you know straight away whether your home or office needs airing. It also tracks air pressure, a reliable sign of changing weather. Detailed weather analysis with alerts This garden weather station doesn’t stop at the basics. It also calculates feels-like temperature, heat index, dew point and wind chill, plus shows you wind strength using the Beaufort scale. The max/min memory highlights local weather trends, and with ProWeatherLive alerts you’ll always be prepared for what’s coming. With its rain gauge and wealth of features, it’s like having your own personal weather assistant. Secure your professional weather overview now - with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor! FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the 8-in-1 solar-powered outdoor sensor(temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Compatible with additional optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detectors and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Powered by large, adjustable solar panel Back-up power with 3x AA batteries (not included) Weatherproof housing Range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£264.00*
%
BRESSER 8-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151971519815199 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£138.33* £147.03* (5.92% saved)
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199700261070026207003520 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT Powered by large adjustable solar panel Backup with 3x AA batteries if sunlight is low (not included) Waterproof housing Wireless range up to 150 m SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£165.00*
BRESSER 8-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002610700262070031509080800 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Time signal receiver on the outdoor sensor for improved reception Waterproof housing Long range up to 150 m Battery operated: 3 x AA batteries (not included) SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£86.13*