BRESSER additional / spare base station for rain gauge 7002530 up to LOT No. 1274966
Replacement part or expansion: this additional base station including indoor sensor and alarm function works perfectly with your BRESSER professional rain gauge (7002530 AND a LOT number up to 1274966).
- Additional base station for professional rain gauge (7002530 up to LOT No. 1274966 )
- Indoor sensor: Indoor temperature and humidity
- Maximum and minimum value alarm function, frost/ice warning
- Dimensions: 95 x 23 x 154 mm/Weight: 198 g
- External sensor not included!
- Graphical histogram
- SINCE function to display values from a specific point in time
- Maximum and minimum value display
- Automatically sets the time via DCF radio signal
- Alarm function with snooze button
£26.99*
Available, delivery time: 10-12 working days
Product number:
7902530
EAN:
4007922064697
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER additional / spare base station for rain gauge 7002530 up to LOT No. 1274966"
PLEASE NOTE: This base station is compatible with weather stations with item no. 7002530 AND a LOT up to 1274966. You will find the item and LOT number of your weather station printed on the back of the base station.
Did your base station for your BRESSER professional rain gauge fail to survive your last move or succumb to your children’s curious hands? Perhaps you need an additional display so that you can use the date from your external sensor somewhere else? This additional base station is the accompanying replacement part or expansion for your digital wireless rain gauge.
Rosy outlooks with the additional rain gauge base station
All plants need water. Every nature lover knows it, from gardeners to farmers. The trick is in the amount. With your rain gauge, you can keep an eye on how much water your plants are getting. Why a second base station? First and foremost, you can keep track of the rain values and external temperature measurements from your existing external sensor from a different location. If you choose to make that location your bedroom, you can even do away with your alarm clock. Set the base station to wake you in the morning, and you’ll instantly know whether you need to make time to water the garden that day. You have all usual display options, including the graphical histogram to display rain values by hour, day, week, month or year.
The additional base station is a great all-rounder: The integrated sensor measures the indoor temperature and humidity in the room in which the base station is located. This way, you can declare war on mould and dry air. The other functions, such as the frost alarm, SINCE function and maximum/minimum value alarm, can be used independently of your replacement station.
Get more out of your BRESSER professional rain gauge with this additional base station.
PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the offset function.
FEATURES
- Receives weather data from the professional rain gauge
- Integrated sensor for measuring the external temperature, indoor temperature (°C/°F) and humidity (%)
- Graphical histogram
- SINCE function to display overall rain values from a specific point in time
- Maximum and minimum value alarm function
- Min./max. value memory
- Automatically sets the time via DCF radio signal
- Alarm function with snooze button
- Ice/frost alarm
- Historical data memory
- Backlight
SCOPE OF DELIVERY
- Base station for professional rain gauge (7002530)
- Removable stand
- External sensor not included!
- Instruction manual
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Display size (diagonal in cm): | 10.3 |
| Extended warranty (years): | 5 |
| Material: | Plastic |
| Measurement function: | Humidity , Temperature |
| Net Weight total (incl. accessories) (g): | 567 |
| Net weight (without access.) (g): | 197 |
| Number of sensors included in the package: | 0 |
| Total height (mm): | 25 |
| Total length (mm): | 95 |
| Total width (mm): | 155 |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Customers also viewed
BRESSER 8-in-1 Outdoor Sensor with Adjustable Solar Panel
£147.03*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:15197151981519916511FEATURES Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Powered by large adjustable solar panel Runs on 3x AA batteries (not included) when sunlight is insufficient Waterproof housing Long transmission range up to 150 m SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7002550QT5000
£99.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 1520015201700252570025717002580700258170025857002590Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Base station for 5-in-1 multisensor and other weather stations
Indoor temperature (°C/°F) and humidity
Graphical weather trend display (12 hours)
Beaufort index (scale for measuring wind speed)
Rainfall with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dewpoint
Radio-controlled time and date settings
Phases of the moon
Alarm function
Ice/frost warning
Min./max. memory (up to 24 hours)
SCOPE OF DELIVERY
Base station
Stand
Power adapter
Available
