Replacement or additional sensor – the base station shows all the measurements from your weather station and features a built-in thermo-hygro sensor.
- Base station for Professional Wi-Fi weather station (WSX3001)
- Wi-Fi connection, displays a wide range of measurements and historical data
- Measures the indoor temperature, humidity and air pressure
- Dimensions: 215x172x29 mm / Weight: 630 g
- Sensor not included!
- Integrated Wi-Fi transmission to AWEKAS
- Weather forecast with symbols, high/low alarm
- Alarm with snooze function and ice/frost alarm
£245.99*
Available, delivery time: 10-12 working days
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor FormFAQ - Frequently Asked Questions
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station"
Share your weather data worldwide
The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/).
Additional base station – monitor the indoor climate in another room
If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air.
The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely.
Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station.
FEATURES
- WiFi connection with internet time synchronisation and support for firmware updates
- Publish your weather data on Wunderground or Weathercloud
- Indoor temperature (°C/ °F) and humidity (%)
- Displays the outdoor temperature (°C/ °F) and humidity (%)
- Light intensity (Klux / Kfc / W/m²)
- Displays the current UV index, exposure level and recommended protection
- Displays the sunburn time (mins) based on the current UV level
- Wind direction and speed (m/s; km/h; Knoten; mph)
- Beaufort index (scale for measuring wind speed)
- Air pressure with 24-hour history (hPa/inHg/mmHg)
- Rainfall with history (day/week/month)
- Graphical weather forecast for next 12-24 hours
- Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
- Trend indicator shows the weather trends for the next few minutes
- Visual comfort level indicator for room temperature and humidity
- Phases of the moon
- Sunrise and sunset times
- Alarm with snooze function (5 minutes) and ice/frost warning
- Weekday alarm
- Min./max. memory (up to 24 hours)
- LED backlight, amber-coloured
- Wall bracket and table stand
- Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included)
- Dimensions: 215 x 172 x 29 mm and weight: 639 g
- Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
- Integrated Wi-Fi transmission to AWEKAS
- Security protocol: supports WPA3 encryption for firmware version 1.09 and above
DELIVERY CONTENT
- Base station with stand
- Power adapter
- Instruction manual
| 2) Footnote: | The batteries are not included in the delivery. Please, use only the batteries that are recommended. Take a particular attention to the safety instructions written in the user guide. |
|---|---|
| Assembly required: | No |
| Barometric air pressure range (mbar) from: | 850 |
| Barometric air pressure range (mbar) up to: | 1050 |
| Batteries included: | No |
| Batteries required: | Yes |
| Body material: | Plastic |
| Colour: | grey |
| Display height (cm): | 12 |
| Display size (diagonal in cm): | 20 |
| Display width (cm): | 18.3 |
| Extended warranty (years): | 5 |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.5 |
| Inside temperature (°C) from: | -40 |
| Inside temperature (°C) up to: | 70 |
| Material: | Plastic |
| Measurement function: | Humidity (inside) , Inside temperature |
| Net Weight total (incl. accessories) (g): | 654 |
| Net weight (without access.) (g): | 597 |
| Number of sensors included in the package: | 0 |
| Smartphone app: | No |
| Total height (mm): | 172 |
| Total length (mm): | 213 |
| Total width (mm): | 29 |
| Typ [Batteries]: | AAA |
| Type of mounting: | Stand , Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.