BRESSER Additional / Replacement Base Station for Professional Rain Gauge 7002530 (from LOT.-Nr. 1603231)
Whether as a replacement part or an extension: This base station is a perfect match for BRESSER professional rain gauges with item no. 7002530 and LOT no. 1603231 and higher.
- Base station for BRESSER professional rain gauge with extensive measurement and historical data display
- Compatible with rain gauges with item no. 7002530 from LOT no. 1603231 onwards
- Important note: No outdoor sensor included!
Product number:
16442
EAN:
4007922202341
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER Additional / Replacement Base Station for Professional Rain Gauge 7002530 (from LOT.-Nr. 1603231)"
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.
- 7002530 (from lot number 1603231)
FEATURES
- Display of rainfall amount
- DCF radio-controlled clock reception and display
- Alarm with snooze function
- Outdoor temperature alarm (frost warning)
- Outdoor temperature display (in °C or °F)
- Indoor temperature (in °C or °F)
- Indoor humidity
- Histogram
- SINCE function for displaying total rainfall since a specific point in time
- Minimum and maximum value display
- Max./min. value storage
- Backlight
- Battery operated (station: 2x AA – not included!)
SCOPE OF DELIVERY
- Base station
- No outdoor sensor included!
- Instruction manual
| 2) Footnote: | The batteries are not included in the delivery. Please, use only the batteries that are recommended. Take a particular attention to the safety instructions written in the user guide. |
|---|---|
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black |
| Display height (cm): | 8.2 |
| Display size (diagonal in cm): | 10.3 |
| Display width (cm): | 6.5 |
| Extended warranty (years): | 5 |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.2 |
| Indoor sensor humidity measuring range from (%): | 20 |
| Inside temperature (°C) from: | -5 |
| Inside temperature (°C) up to: | 50 |
| Material: | Plastic |
| Measurement function: | Humidity , Temperature |
| Measurement range for indoor humidity sensor up to (%): | 90 |
| Net weight (without access.) (g): | 215 |
| Number of sensors included in the package: | 0 |
| Power supply unit included: | No |
| Total height (mm): | 155 |
| Total width (mm): | 95 |
| Typ [Batteries]: | AA LR6 1,5V |
| Water-repellent: | No |
| Waterproof 8): | No |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The device's AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
