Action Cam LED Torch
- Action Cam LED light for convincing brightness
- 3 LED's, 30m waterproof, 900mAh battery capacity
- 3 light modes: High/Low/SOS, color temperature 5600K
- Dimensions: 74 x 47 x 65 mm; Weight: 95 g
- Incl: Lamp, USB cable, holder, rechargeable battery
- Suitable for night shots, for diving, for badly exposed rooms
- LED charge indicator
- Brightness: 360 lm
- Colour temperature: 5600K
£11.90*
Available, delivery time: 10-12 working days
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and the direct way to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the item number or EAN and open the matching help page directly.
Service PortalGuides & Tips
FAQ - Frequently Asked Questions
- BK-7 (borosilicate glass): Standard, good imaging performance
- BaK-4 (barium crown glass): Higher quality, rounder exit pupils, brighter and higher-contrast image
Product information "BRESSER Action Cam LED Torch"
Using the supplied mounting and the fixing screw the LED light can be attached to almost all Action Cams.
The 3 integrated LED's provide a convincing brightness, so that you can also take photos and videos at night without any problems. The illumination is adjustable in three different light levels (High/ Low/ SOS) .
The BRESSER Action Cam LED light is up to 30m waterproof, which is why diving with the LED light for underwater photography is no problem.
The supplied and replaceable battery can be charged with the included USB charging cable . The battery capacity is 900 mAh.
FEATURES
- 3 bright LED's
- brightness: 360 lm
- Colour temperature: 5600K
- 3 light levels: High/ Low and SOS
- Suitable for night shots, for diving, for badly lit rooms
- Housing waterproof: 30 m
- Battery capacity: 900 mAh
- LED charge indicator
- LED Lamp
- USB charging cable
- Holder
- knurled screw
- Battery
- Manual
| Batteries included: | No |
|---|---|
| Batteries required: | Yes |
| Colour: | black |
| Extended warranty (years): | 5 |
| Field of application [Electronics]: | Extreme sports , Game observation , Outdoor/Trekking , Recreational sports , Water sports |
| Interfaces: | Micro USB |
| Material: | Plastic |
| Net Weight total (incl. accessories) (g): | 148 |
| Net weight (without access.) (g): | 95 |
| Total height (mm): | 65 |
| Total length (mm): | 74 |
| Total width (mm): | 47 |
| Waterproof 8): | Yes |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
www.bresser.de
- Suffocation risk Keep packaging materials such as plastic bags and rubber bands out of the reach of children, as these materials pose a suffocation hazard. This product contains small parts that could be swallowed by children.
- Leaking battery acid can cause chemical burns. Avoid contact with battery acid on skin, eyes, and mucous membranes. If contact occurs, immediately rinse the affected area thoroughly with water and seek medical attention.
- Electrical shock - Never bend, kink, or pull on the power and connection cables, extensions, and adapters. Protect the cables from sharp edges and heat. Before operation, check the device, cables, and connections for damage. Never use a damaged device or a device with damaged power cables. Damaged parts must be immediately replaced by an authorized service center.
- NOTICE! Do not disassemble the device! In case of a defect, please contact the service center in your country. Do not immerse the device in water. Do not expose the device to excessive force, shocks, dust, extreme temperatures, or high humidity, as this may cause malfunctions, shorter electronic lifespan, damaged batteries, and warped parts. If the product is functioning, a slight click will occur every few seconds. This is a normal phenomenon as the lens captures the image.
- Do not expose the device to high temperatures. Do not short-circuit the device or throw it into fire. Excessive heat or improper handling can cause a short circuit, fire, or explosion.
- Do not interrupt an ongoing data connection to a computer before all data has been transferred. This could lead to data loss, for which the manufacturer is not liable.
- Disposal: Dispose of packaging materials properly according to their type, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on proper disposal. Do not dispose of electronic devices in household waste! The integrated battery should only be removed for disposal. Opening the housing may damage the device. Fully discharge the battery before disposal. Remove all screws from the housing and open the housing. Remove the battery connections and take the battery out. Cover the exposed contacts with tape and pack the battery in a way that it cannot shift in the packaging.