Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER 7-in-1 Solar 6-Day 4CAST PRO Wi-Fi Weather Station

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The device’s AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003200700321070032207003230700324070033007003360700340070035007003510700370070038007003900700440690806009080700WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm SCOPE OF DELIVERY Solar-powered outdoor sensor Mounting materials Base station is not included! Instruction manual

Available

£146.63* £146.99* (0.24% saved)
%
BRESSER PM2.5/10 Air Quality Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700 A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter. FEATURES High-precision PM2.5/PM10 meter Can be used alone or with select BRESSER weather stations LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours Battery level indicator 4 available channels Transmission frequency: 868 MHz Range of up to 150 m Power supply: 3 rechargeable AA batteries (included) or USB port (cable included) DELIVERY CONTENT PM2.5/PM10 air quality meter 3 rechargeable AA batteries USB cable Instruction manual

Available

£103.11* £103.99* (0.85% saved)
%
BRESSER Water Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700 Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage. Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed. FEATURES Water sensor for detecting water leaks Loud 90 dB alarm tone Range of up to 150 mCable length: approx. 140 cm 7 available channels Wireless and compact design Power supply: 2x AA batteries (not included) DELIVERY CONTENT Water detector Instruction manual

Available

£42.57* £42.99* (0.98% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.03* £122.99* (0.78% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Lightning Detector
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520 The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

£42.57* £42.99* (0.98% saved)
Skip product gallery

Compatible Base Stations

%
BRESSER Additional Base Station for the 7003200 4-Day 4CAST Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.700320070032107003360 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 4-day weather forecast (today and 3 following days) with symbols Receives weather data from the 7-in-1 outdoor sensor Wi-Fi connection for sharing local weather data on the ProWeatherLive platform Forecast for maximum and minimum temperature and chance of rainfall via ProWeatherLive Weather warnings via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed with trend indicator Beaufort index (scale for measuring wind speed) Wind direction display (current and predominant, 16 directions) UV level display Light intensity display Sunburn time display (in mins) Precipitation display (hourly, daily, weekly, monthly, total precipitation) Air pressure Weather data calibration Maximum/minimum value memory (daily/total) Colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter and CR2032 back-up battery (not included) Dimensions: 187 x 118 x 18 mm SCOPE OF DELIVERY Base station Power adapter Instruction manual

Available

£108.79* £108.99* (0.18% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003210
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.700320070032107003360 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Wi-Fi connection for sharing local weather data on portals such as ProWeatherLive and AWEKAS Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Large colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 215 x 176 x 25 mm SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£131.49* £131.99* (0.38% saved)
Skip product gallery

Customers also bought

%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
BRESSER Night Vision Monocular NightSpy Mono
NOTE: The built-in infrared illumination is not suitable for military use. With the BRESSER Night Vision Monocular NightSpy Mono, night-time exploration becomes second nature - perfect for spotting nocturnal wildlife in complete darkness. Thanks to its invisible 850 nm infrared LED light, this advanced optical device lets you see clearly up to 150 metres in the dark. Your subjects appear in crisp black and white on the round 1.28" display - and during the day, you can enjoy vibrant colour images. Capture the moment - with photo and video recording Save those unforgettable sights with ease: the built-in camera lets you take photos at up to 30 megapixels (interpolated) or record HD video (1080p interpolated) at the press of a button. Your footage is stored on a microSD card up to 32 GB (card not included) - ideal for sharing your outdoor discoveries with friends and family. Effortless handling and on-the-go comfort Designed for ease of use, this night vision monocular features illuminated silicone buttons for simple control, even in total darkness. Just switch off the button lights to avoid startling wildlife. Its compact, ergonomic design and battery life of up to 9 hours in daylight (or 3 hours at night with IR on) make the night vision camera the perfect companion for outdoor adventures. Reveal what hides in the dark - with the space-saving BRESSER Night Vision Monocular NightSpy Mono. FEATURES Digital infrared night vision device - for civilian use only Compact, easy-to-carry night vision monocular Objective lens diameter: 20 mm Viewing range: up to 150 m at night, up to 200 m in daylight Magnification: 3x optical, 2x digital - up to 6x total 850 nm infrared LED illumination Photo and video recording functionality Photo resolution: 640x480p (12 MP / 30 MP interpolated) Video resolution: 640x480p (720p / 1080p interpolated) Storage: microSD card up to 32 GB (not included) Illuminated silicone buttons for ease of use (can be turned off) Battery life: up to 9 hrs in daylight, up to 3 hrs with IR on Power supply: 2000 mAh 18500 lithium-ion battery (included) SCOPE OF DELIVERY Night vision monocular Pouch USB-C cable Wrist strap Rechargeable battery Instruction manual

Available

£109.00*
BRESSER YOUNGSTER Microscope with Magnification 40x-2000x
The BRESSER YOUNGSTER has up to 2000x magnification and a new innovative Smartphone Mount that allows you to take photos through the microscope. To ensure you're fully equipped, the accessories included provide the perfect introductory equipment. This includes, among other things, two wide-field eyepieces, a colour filter disk, many slides and storage containers. With its elegant Bresser design, the microscope has many useful features. The adjustable LED illumination can be used as an incident light for viewing opaque objects and as transmitted light for viewing transparent objects. FEATURES Introductory microscope Magnification: 40x-2000x Lenses: 4x/10x/40x Oculars: WF25x/ WF10x Comprehensive accessories Includes experiment kit for breeding brine shrimp (Artemia) Battery powered: 3x AA batteries (not included) SCOPE OF DELIVERY Microscope Smartphone mount Wide field eyepieces: WF25x/ WF10x 2x Barlow lens Colour filter disk Box with slides, storage case Experiment kit (magnifier box, brine shrimp eggs, yeast) Sea salt Preparation set Instruction manual

Available

£94.99*
%
BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H
Get a true room climate expert now with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. You can easily read on the stylish screen whether it is time for fresh air. Perfect for effectively preventing mould and excessively dry air! Additionally, the high-quality thermometer and hygrometer precisely measure the temperature and humidity indoors as well as outdoors. And with the additional comfort indicator, you can always keep an optimal eye on the room climate. Intuitive operation and practical functions Effortlessly achieve the perfect room climate: The thermo-hygrometer with ventilation recommendation is equipped with user-friendly touch buttons. Interested in the highs and lows of your room's air quality? Simply call up the maximum and minimum values for temperature and humidity. This way, you can also keep an eye on the development of your room climate. Flexible placement thanks to high-quality outdoor sensor Whether in the garden, on the balcony, or in the front yard – with a range of up to 50 m, you have plenty of flexibility in where you place it. The integrated display shows the current temperature and humidity values directly on site. Naturally, the wireless sensor is water-repellent, making it perfect for outdoor use. Ensure fresh air at home, in the office, and more – with the BRESSER Thermo-Hygrometer with Ventilation Recommendation VentAir H. BASE STATION FEATURES Ventilation recommendation for easy improvement of room climate Ideal for early prevention of mould and excessively dry indoor air Room climate comfort indicator Outdoor temperature (°C / °F) Indoor temperature (°C / °F) Relative humidity (indoor and outdoor) (%) Time display Operation via user-friendly touch buttons on the display Min/Max value memory for temperature and humidity With backlight Thermo-hygro outdoor sensor (1x included) Range: up to 50 m Battery operated: 3x AAA batteries (not included) OUTDOOR SENSOR FEATURES Measurement of temperature and humidity Clear LCD display IP protection class: IP44 Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station Outdoor sensor User manual

Available

£21.75* £36.99* (41.2% saved)
Skip product gallery

Customers also viewed

BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast
Stay on top of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

£190.53*
BRESSER Wi-Fi 4CAST MD Wireless Weather Station
The BRESSER WLAN 4CAST MD Wireless Weather Station never leaves you out in the rain. To achieve this, the device enhances your locally measured data with the 7-in-1 Solar Outdoor Sensor through practical weather forecasts from the internet: Whether it's the comprehensive 7-day weather forecast or the shorter-term look at the next 24 hours - with the clear diagrams for temperature and precipitation probability, you always know when to take an umbrella or plan a picnic outdoors. And weather enthusiasts who like to take an analytical look back can call up the graphs for development of air pressure, temperature, humidity, and precipitation. Harnessing the power of the sun - the eco-friendly Solar Outdoor Sensor Choose environmental consciousness when it comes to weather: The large, movable solar panel reliably powers the outdoor sensor of the weather station with sufficient sunlight. And when the sun isn't shining? Then 3 AA batteries step in as a backup. With a range of up to 150 meters, the sensor gives you plenty of space to find the perfect spot for it. And the data measured there on outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity appear on the base station's screen in no time. App or web browser - always up-to-date with the WLAN weather station Thanks to the WLAN connection, you quickly become part of a global weather community. Through it, you publish your own measurements on platforms like ProWeatherLive, WeatherUnderground, and Weathercloud. Handy: This way, your weather station via app or web browser is always where you are. 2 locations, one glance - dual room climate control Keep an eye on the room climate in 2 rooms at once: Thanks to the integrated sensor in the base and the included Thermo-Hygro wireless sensor, you quickly check the indoor temperature and humidity in different places. And when the smiley-form comfort indicator smiles at you, everything is in the green zone in terms of room climate. Customized weather station with optional sensors Want to fully exploit the potential of the weather station or optimally adapt the measuring device to your needs? Then get the matching additional sensors (not included): Optional Thermo-Hygro sensors for room climate Optional soil and pool sensors for the garden Optional water detectors Optional PM2.5/10, CO2, and HCHO+VOC sensors for air quality Take a look at our BRESSER accessories for an overview of the compatible additional sensors (not included). Discover with the BRESSER WLAN 4CAST MD Wireless Weather Station how exciting the climate right outside your door can be! BASE STATION FEATURES Weather station with 7-in-1 outdoor sensor and 1x Thermo-Hygro wireless sensor 7-day weather forecast with diagrams for temperature (high, low, daily average) and precipitation probability 24-hour weather forecast with diagrams for hourly temperature and precipitation probability WLAN connection for retrieving and sharing local data on ProWeatherLive, WeatherUnderground, Weathercloud, and an additional platform Display of exact measurements from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level, light intensity) Indoor temperature (°C/°F) and humidity Air pressure Apparent temperature and dew point Graph for air pressure, temperature, humidity, and precipitation trends Max/Min value memory (max./min.) Time and date (Internet time synchronization) Moon phase, sunrise, and sunset Integrated alarm clock Expandable with the following optional sensors for immediate on-site measurement: Up to 3x Thermo-Hygro, soil, and/or pool sensors (not included) Up to 3x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) Weather and air quality warning function (only with corresponding optional sensors) Suitable for tabletop or wall mounting Power supply: Mains adapter (included), CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF THE 7-IN-1 OUTDOOR SENSOR Measurement of temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity Powered by a large movable solar panel Operation with 3x AA batteries (not included) in case of insufficient sunlight Range: up to 150 m FEATURES OF THE THERMO-HYGRO SENSORMeasurement of temperature and humidity With display for direct reading of the measurements Range up to 150 m Power supply: 2x AA batteries (not included) SCOPE OF DELIVERYBase station 7-in-1 solar outdoor sensor 1x Thermo-Hygro sensor Power adapter User manual

Available

£249.00*
BRESSER Bird/Small Animal-Camera SFC-1
Sunshine, fresh air, a nice drink and the birds are chirping at the birdhouse. What could be better than watching the bird or the squirrel? So that you can be even closer to the action, BRESSER has developed the bird and small animal camera. Experience your gardeners from a completely new perspective. Use the camera to shoot photos and / or videos of max. 1m distance. Equipped with a 940nm infrared LED illumination, this digital camera can be used both day and night for stunning close-up pics of the small animal. The camera has a motion sensor, with a range of about 1 m, which triggers the camera when an animal flies in front of the camera. Small movements of trees or shrubs are thus prevented. It is also suitable for all seasons due to its rainproof housing. Not only photos are possible with this camera. Also video recordings, optionally of 5.10, 20, 30 seconds, 1 minute or 5min in length, can be recorded. The camera can be used during the day (color images) and thanks to the infrared lighting during the night (black and white). The low power consumption ensures a long service life without having to constantly change the batteries. CHARACTERISTICS Infrared motion sensor allows photo and video recordings (16MP Photo, 1920x1080 24fps video, 1280x720 30fps, 640x480 30fps video) colored pictures by day, monochrome pictures by night 4 built-in infrared LEDs for bright pictures up to 1m away Fast 0.6 sec. tripping time low power consumption for long operating time (up to 12 months in stand-by mode) Tripod connection thread 1/4 '', SD card slot Mini USB port DELIVERY digital small animal camera USB cable assembly belt Mounting rod for mounting to your bird house incl. 6 fixing screws operation manual

Available

£26.90*
BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor
Stay one step ahead of the weather with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor. Thanks to the large, clear 10-inch (25.4 cm) display, you’ll have all the key data in front of you at a glance. Standout features include the detailed forecast and the WBGT heat stress level, helping you stay safe and comfortable on hot days. And with a Wi-Fi connection, your personalised weather updates are always within easy reach - wherever you are. Comprehensive forecasts straight to your screen Planning a barbecue or a family outing? The local 24-hour and 14-day forecasts, including maximum and minimum temperatures and chance of rain, powered by the ProWeatherLife server, make it easy to pick the perfect time. This weather station with outdoor sensor also provides internet-based data on visibility and cloud cover. Want to share your readings? Simply publish them via Wi-Fi to ProWeatherLive or Weathercloud - and connect with the global weather community. 8-in-1 outdoor sensor: compact, precise, reliable This clever all-rounder measures temperature, humidity, wind speed and direction, rainfall, UV level, light intensity and WBGT. The large adjustable solar panel keeps it running sustainably, while 3 AA batteries (not included) step in when sunlight is limited. With a range of up to 150 m and a durable, weatherproof housing, you can set it up just where you need it for the most accurate results. WBGT - stay safe in the heat When the mercury soars, heat can take a toll on your body. That’s where the Wet Bulb Globe Temperature (WBGT) comes in. It combines three factors - air temperature, mean radiant temperature and wet-bulb temperature - to calculate heat stress accurately. If the wet-bulb temperautre value stays above 35 °C, your body starts absorbing heat from its surroundings, which can quickly become dangerous. Whether you’re training, gardening or enjoying the outdoors, this digital weather station gives you the exact WBGT reading at all times. The heat stress index also provides a simple warning, so you know when to take a break. Indoor climate check included A healthy climate isn’t just for outside. The base station also measures indoor temperature and humidity via its built-in thermometer and hygrometer. The handy comfort indicator lets you know straight away whether your home or office needs airing. It also tracks air pressure, a reliable sign of changing weather. Detailed weather analysis with alerts This garden weather station doesn’t stop at the basics. It also calculates feels-like temperature, heat index, dew point and wind chill, plus shows you wind strength using the Beaufort scale. The max/min memory highlights local weather trends, and with ProWeatherLive alerts you’ll always be prepared for what’s coming. With its rain gauge and wealth of features, it’s like having your own personal weather assistant. Secure your professional weather overview now - with the BRESSER 4CAST 10" Wi-Fi Home Weather Station with 8-in-1 Sensor! FEATURES BASE STATION 24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the 8-in-1 solar-powered outdoor sensor(temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Compatible with additional optional sensors (not included, see BRESSER accessories): Optional thermo-hygro sensors for indoor climate Optional soil and pool sensors for the garden Optional water detectors and lightning sensors Optional PM2.5/10, CO2 and HCHO+VOC sensors for air quality Power supply: mains adapter (included), 1x CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES SENSOR Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Powered by large, adjustable solar panel Back-up power with 3x AA batteries (not included) Weatherproof housing Range up to 150 m SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£264.00*
%
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

£216.63* £226.99* (4.56% saved)
%
BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station with Various Display Modes
What is the weather doing? The BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station will show you everything that you need to answer this question. The dynamic 17.8 cm (7-inch) HD TFT colour screen displays the measurements from the two included sensors in a range of different display modes. With a simple button press, you can view the weather data that you need: the home screen with the basic data and a reliable weather forecast, the detailed view with more data including maximum and minimum values and trends, or the overview screen with the temperature and air pressure. And for passionate weather enthusiasts, the Wi-Fi weather station can also display historical data. The data protocol delivers detailed measurements at intervals of 5, 10 or 30 minutes – all of which can be exported via USB for further analysis on your PC. All max/min values for the past day can also be displayed on the Wi-Fi weather station with a simple button press. You can also view a history graph to analyse the recent trends in the weather. Solar weather station with 7-in-1 sensor and thermo-hygro wireless sensor The MeteoChamp Weather Station comes with two feature-packed outdoor sensors: one 7-in-1 sensor and one wireless thermo-hygro sensor.The 7-in-1 wireless sensor reliably measures the outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. And what’s more, this multi-sensor with a large solar panel is powered by solar power. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries as a back-up during installation and they will take care of the power supply. The thermo-hygro wireless sensor is responsible for indoors. Because the climate there influences our well-being just as much as it does outside. That's why in addition to the built-in hygro-thermo sensor inside the base station this wireless thermo-hygro sensor measures the indoor temperature and humidity in an additional room. This way you can check in a flash whether the air in the bathroom is dry enough or the temperature in the children's room is pleasant - and give mould as well as excessively dry air no chance. Perfectly networked – share measurements from your Wi-Fi weather station In the age of the Internet, we want to be able to access our local weather data remotely and share it with others. The solar weather station comes with a Wi-Fi function that allows you to do just that – on up to 3 weather platforms. The Wi-Fi weather station features native support for the popular weather services ProWeatherLive, Weather Underground and Weathercloud, which can be configured in a few simple steps. If you prefer to use another platform such as the German-language portal AWEKAS, you can also connect your weather station to your desired provider. And if you have a smart home, the Wi-Fi weather station can be connected directly to your smart home system with our partner AWEKAS. For more information, visit the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ The weather station also has another smart feature to ensure that you have plenty of time to get ready on frosty mornings: an ice/frost alarm. This makes the built-in alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The solar weather station also has an individually configurable weather alarm, which notifies you when the wind speed, rainfall or other readings exceed or drop below your preset limits. Keep track of the weather with the comprehensive measurements and display options on the BRESSER MeteoChamp 7-in-1 HD Wi-Fi Weather Station. BASE STATION FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity) Displays precise measurement data from the thermo-hygro sensor (temperature and humidity) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 5 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) Dimensions: 192 x 22 x 140 mm / Weight: 380 g Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 SOLAR-POWERED OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Range: Up to 150 m Dimensions: 410 x 170 x 225 mm / Weight: 533 g THERMO-HYGRO SENSOR FEATURES Measures the temperature and humidity Range: up to 150 m Power supply: 2x AA batteries (not included) Dimensions: 61 x 113 x 39.5 mm SCOPE OF DELIVERY 1x Base station 1x Solar-powered outdoor sensor 1x Wireless thermo-hygro sensor Power adapter Instruction manual

Available

£377.45* £453.99* (16.86% saved)
BRESSER Azores Professional Home Weather Station with 5-in-1 Outdoor Sensor
With the BRESSER Azores Professional Home Weather Station with 5-in-1 Outdoor Sensor, you’ll always stay one step ahead of the weather. Combining precise data from a high-quality wireless sensor with the clever features of the base station, it turns you into a true climate expert who’s ready for anything. Your all-round outdoor weather scout Wondering in the morning if a T-shirt will be enough for the day? This digital weather station gives you the answer in seconds. With five accurate measurements - outdoor temperature, humidity, wind speed, wind direction and rainfall - displayed on a bright, easy-to-read colour screen, you’ll always know what to expect. And thanks to its range of up to 150 metres, the robust outdoor sensor can be positioned exactly where it gives the most reliable readings.Great features for real-world weather Avoid surprises when you step outside: the weather index shows you how the climate really feels with data on feels-like temperature, dew point, wind chill and heat index. Need a quick glance? The graphical weather forecast makes it easy. And with the Beaufort scale, you’ll instantly see whether you’re in for a light breeze or heavy gusts. Start your day right On frosty mornings, the integrated alarm with frost warning ensures you’re up in time to tackle icy roads. Meanwhile, the DCF radio signal automatically sets time, date, weekday and moon phase for you. And indoors, the precise temperature and humidity readings with comfort indicator help you keep your home climate perfectly balanced. Track the trends Want to see how the weather developed over the day? The weather station makes it easy with its max./min. memory, bar charts and 24-hour history. You can even set custom alerts: the high/low alarm notifies you as soon as your chosen thresholds are reached - so nothing catches you off guard. Be ready for whatever the skies bring - with the BRESSER Azores Professional Home Weather Station with 5-in-1 Outdoor Sensor! FEATURES BASE STATION Receives and displays data from the 5-in-1 professional sensor (temperature, humidity, wind speed, wind direction, rainfall) Indoor temperature (°C / °F) and humidity with comfort indicator Weather index (feels-like temperature, dew point, wind chill, heat index) Beaufort scale (wind strength classification) Weather forecast Air pressure display Bar charts for rainfall (last 5 days) or air pressure changes (last 1, 3, 6, 12, 24 hrs) Max./min. memory with time stamp 24-hour history data High/low value alarm Time, date, weekday, moon phase automatically set via DCF signal (optional manual setting) Alarm with frost warning Adjustable display brightness: High / Low / Off Mountable with stand or wall fixture Power supply: mains adaptor (included), 1x CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.FEATURES 5-in-1 OUTDOOR SENSOR Measures wind speed, wind direction, humidity, outdoor temperature and rainfall Range: up to 150 m Replaceable thermo-hygro module Battery powered: 3x AA batteries (not included) SCOPE OF DELIVERY Base station 5-in-1 outdoor sensor Mains adaptor Instruction manual

Available

£134.00*