Skip to main content Skip to search Skip to main navigation

BRESSER 7-in-1 Outdoor Sensor with Adjustable Solar Panel

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • RISK OF SUFFOCATION! Improper use of this product can lead to suffocation, especially in children. Therefore, it is essential to follow the safety information below. Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a suffocation risk! This product contains small parts that could be swallowed by children! There is a suffocation risk!
  • Risk of electric shock! This device contains electronic parts powered by a power source (power supply and/or batteries). Improper use of this product poses a risk of electric shock. An electric shock can cause serious to fatal injuries. Therefore, be sure to follow the safety information below. Never leave children unsupervised when handling the device! The device must only be used as described in the instructions, otherwise, there is a risk of electric shock!
  • Explosion risk! Improper use of this product poses an explosion risk. Be sure to follow the safety information below to avoid an explosion. Do not expose the device to high temperatures. Only use the recommended batteries. Do not short-circuit the device and batteries, or throw them into fire! Excessive heat and improper handling can cause short circuits, fires, and even explosions!
  • Risk of material damage! Improper handling may damage the device and/or accessories. Therefore, use the device only according to the following safety information. Do not disassemble the device! In case of a defect, please contact your specialist dealer. They will contact the service center and may send the device for repair if necessary. Do not immerse the device in water! Do not expose the device to shocks, vibrations, dust, prolonged high temperatures, or extreme humidity. This may lead to malfunctions, short circuits, as well as damage to batteries and components. Only use the recommended batteries. Always replace weak or used batteries with a completely new set of fully charged batteries. Do not use batteries from different brands, types, or varying capacities. Remove batteries from the device when it is not used for an extended period.
  • Risk of voltage damage! The manufacturer is not liable for voltage damage resulting from incorrectly inserted batteries!
Skip product gallery

Compatible Base Stations

BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included). Share your weather data worldwide The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/). Additional base station – monitor the indoor climate in another room If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air. The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely. Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station. FEATURES WiFi connection with internet time synchronisation and support for firmware updates Publish your weather data on Wunderground or Weathercloud Indoor temperature (°C/ °F) and humidity (%) Displays the outdoor temperature (°C/ °F) and humidity (%) Light intensity (Klux / Kfc / W/m²) Displays the current UV index, exposure level and recommended protection Displays the sunburn time (mins) based on the current UV level Wind direction and speed (m/s; km/h; Knoten; mph) Beaufort index (scale for measuring wind speed) Air pressure with 24-hour history (hPa/inHg/mmHg) Rainfall with history (day/week/month) Graphical weather forecast for next 12-24 hours Weather index (‘feels like’ function, dew point, heat index, wind chill factor) Trend indicator shows the weather trends for the next few minutes Visual comfort level indicator for room temperature and humidity Phases of the moon Sunrise and sunset times Alarm with snooze function (5 minutes) and ice/frost warning Weekday alarm Min./max. memory (up to 24 hours) LED backlight, amber-coloured Wall bracket and table stand Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included) Dimensions: 215 x 172 x 29 mm and weight: 639 g Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included) Integrated Wi-Fi transmission to AWEKAS Security protocol: supports WPA3 encryption for firmware version 1.09 and above DELIVERY CONTENT Base station with stand Power adapter Instruction manual

Available

£245.99*
BRESSER Additional / Replacement Base Station for the 7003220 6-Day 4CAST PRO SF Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 70025417003200700321070032207003230700324070033607003500700351070037007003800700390070063009080700WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 6-day weather forecast (today and 5 following days) Large 25.4 cm (10-inch) colour display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£87.00*
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

Available

£199.00*
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Large 17.8 cm (7-inch) HD TFT colour display with various display modes Multi-channel overviews for displaying all live data from the wireless sensors Publish your weather data via Wi-Fi on up to 3 weather platforms (ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform) Measures the indoor temperature and humidity Displays the graphical weather trend (last 24 hours) Weather forecast Beaufort scale display (scale for classifying the wind speed) Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Maximum/minimum value memory Trend display for all temperature and humidity measurements Historical data log, exportable to USB drive (not included) Individually configurable weather alarm for different measurements Weather data calibration Synchronization with Internet UTC time with time zone selection Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times Built-in alarm with ice/frost alarm Choose between dark or light display Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually) 7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE) Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system) Supports up to 7 wireless sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included), CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£263.99*
Skip product gallery

Customers also bought

BRESSER Precision Thermo-Hygro Sensor
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. This device is compatible with weather stations with the following article numbers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emperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.99*
BRESSER Soil Temperature and Moisture Meter
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. This device is compatible with weather stations with the following article numbers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ireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.99*
BRESSER Spa and Pool thermometer
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. This device is compatible with weather stations with the following article numbers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loating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.99*
BRESSER Lightning Detector
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels. This device is compatible with weather stations with the following article numbers: 15196151971519815440162691650816511700261070026207003210700322070032307003240700352079032107903220 FEATURES Lightning sensor for measuring lightning strikes Displays a light signal when a lightning strike is detected The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour LED indicator for data transmission Range of up to 100 metres Adjustable sensor sensitivity (high/medium/low) Power supply: 2x AA batteries (not included) DELIVERY CONTENT Lightning sensor Instruction manual

Available

£42.99*
BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station
Perfect for passionate weather enthusiasts: The BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station offers everything a hobby meteorologist's heart desires with various display modes, a sophisticated multi-sensor with 9 different sensors, and comprehensive data storage with export options. Additionally, the extensive weather forecast, the heat stress index, and the air quality data make it easy to plan your outdoor activities while keeping health in mind. And thanks to the Wi-Fi connection, you always have your own measurements on the go on your mobile device. Weather station perfectly presenting extensive measurement data How strong will the wind blow in my face shortly? With the wireless weather station, you can answer this and other meteorological questions in no time. The partially solar-powered multi-sensor measures all relevant weather parameters from temperature to air pressure with precision. Trend graphs, data log, channel overview or max/min value display – enjoy numerous possibilities to evaluate the data at a glance on the screen. A CSV export to your PC can also be done in no time. Detailed weather forecast for long-term planning Do you want to know if your weekend trip will be ruined by rain? With the MeteoChamp, you will have a comprehensive weather forecast on your screen in no time. Find out what to expect hourly for the next 24 hours or daily for the next 14 days in terms of climate. The temperature and precipitation probability forecast helps you with your planning. Carefree summer fun – with the heat stress index When the weather is nice, many head outdoors. But when the sun is too strong, we need to take care of our health during strenuous activities. This is where the heat stress index comes into play, calculated by the weather station. It is based on the Wet Bulb Globe Temperature, which considers the key heat factors in the environment. The four warning levels help you stay safe and healthy on hot days. Breathe easy – with the air quality display How clean is the air you breathe? The local AQI (Air Quality Index) shows you directly whether the air in your surroundings is clean. Also, current data on pollutant exposure from PM2.5, PM10, NO2, SO2, O3, and CO from the internet are available at the press of a button. For data measured directly on-site, you can expand your weather station with optional CO2 sensors (not included), in addition to optional thermo-hygro sensors (not included) or water detectors (not included). Keep an eye on the climate with the help of a versatile weather expert: the BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station. FEATURES BASE STATION Weather station with HD display for various display modes Display of the exact measurement data from the 9-in-1 outdoor sensor (outdoor temperature, outdoor humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hours) including temperature and precipitation probability WiFi connection for sharing and retrieving local data on platforms like ProWeatherLive (3 years membership included), WeatherUnderground, and Weathercloud Indoor temperature (°C/°F) and humidity Display of internet data on local AQI value (Air Quality Index) and the 6 most important pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overviews of live data from all wireless sensors Felt outdoor temperature and dew point Max/min value memory with timestamp Trend graphs over 72 hours for all sensors Data storage with export function High/low value alarm for various measurements Weather data calibration Alarm clock with frost warning Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Expandable with the following optional sensors: Up to 7x thermo-hygro, ground, and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Various backgrounds adjustable Power supply: Power plug (included), CR2032 back-up battery (not included) FEATURES MULTISENSOR Measures temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, air pressure, WBGT Operates via a large movable solar panel If there is insufficient sunlight, operates on 3x AA batteries (not included) Waterproof housing High range up to 150 m SCOPE OF DELIVERY Base station including power plug 9-in-1 outdoor sensor Manual

Available

£399.00*
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers: 15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2 Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2 FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.99*
Skip product gallery

Customers also viewed

BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.99*
BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors
With the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, innovation flows through your weather data. This clever device allows you to access readings from your existing BRESSER weather station or various optional sensors (not included), wherever you are. It automatically uploads them to the most popular online platforms via Wi-Fi. With the built-in thermometer, hygrometer, and barometer, you can also monitor air pressure, indoor temperature, and humidity indoors. A great upgrade: add Wi-Fi to your weather station Already own a BRESSER weather station, but missing Wi-Fi to complete your meteorology setup? Check below to see if the Wi-Fi Gateway El Niño is compatible with your model. If it is, you can quickly transform your existing device into a Wi-Fi-enabled weather station. You can also add optional sensors (not included) for online data monitoring to enhance your weather tracking. Always available: your weather data on online platforms Stay up-to-date automatically: Your weather data is uploaded directly to platforms like ProWeatherLive, Weather Underground, and Weathercloud via the Wi-Fi Gateway. This allows you to share your station’s readings with the wider weather community. A handy extra: Three years of membership with ProWeatherLive are included with your purchase. Customise your professional weather station Do you have your own idea of what a weather station should look like? With the Wi-Fi Gateway for up to 20 sensors, you can create your perfect setup. Just consult the list of compatible BRESSER devices, and you’ll soon have your customised weather expert at your fingertips. Whether you're expanding or starting from scratch, with the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, you can either bring your current weather station online or build your very own. FEATURES Compact Wi-Fi Gateway for automatically uploading local weather sensor data to online platforms Receives measurement data from optional weather sensors (not included) Publish data on ProWeatherLive (includes 3 years membership), Weather Underground, Weathercloud, and one additional platform Access your data online anytime, anywhere Measures indoor temperature, humidity, and air pressure Configure Wi-Fi, time, weather platforms, calibration, and firmware updates easily via the WSLink app Compatible with the following BRESSER weather stations:Item No: WSX3001 / 7003600QT5000 / 7003600GYE000 / 7003600CM3000 / 7003100QT5000 / 7003100HZI000 / 7003100GYE000 / 7003100CM3000 / 9080700 / 9080600 / 9080500 / 7003900 / 7003800 / 7003700 / 7003510 / 7003500 / 7003360 / 7003300 / 7003240 / 7003230 / 7003220 / 7003210 / 7003200 / 7002620 / 7002590 / 7002586 / 7002585 / 7002582 / 7002581 / 7002580 / 7002571 / 7002551 / 7002525**Item No.: 7002513 / 7002512 / 7002511 / 7002510 / 9602510 - exclusively LOT No. 1164820 and higher**Item No: 7002550QT5000 / 7002550GYE000 / 7002550CM3000 - exclusively LOT No. 973504 and higher**Compatible with many optional sensors (not included): 1x professional sensor (Item Numbers: 7802580 / 7803300 / 7803200 / 7803510) Up to 7x thermo-hygro sensors (Item Number: 7009971), soil sensors (Item Number: 7009972), or pool sensors (Item Number: 7009973) (not included) Up to 7x water detectors (Item Number: 7009975) (not included) 1x lightning sensor (Item Number: 7009976) (not included) 1x PM2.5/10 sensor (Item Number: 7009970) (not included) 1x CO2 sensor (Item Number: 7009977) (not included) 1x HCHO + VOC sensor (Item Number: 7009978) (not included) Mounting: Stand or wall mount Power supply: USB cable with power adapter SCOPE OF DELIVERY Gateway USB cable USB power adapter User manual ** Item No. and LOT No. are shown on the device and the packaging.

Available

£122.99*
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories! The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station. The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates. An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator. For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions. This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase wake-up function Ice/Frost warning Interior temperature (°C / °F) Humidity with comfort display Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included

Available

£226.99*
BRESSER 8-in-1 Outdoor Sensor
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable. Compatible with the following devices:70026107002620700315078000119080800FEATURES Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT Time signal receiver on the outdoor sensor for improved reception Waterproof housing Long range up to 150 m Battery operated: 3 x AA batteries (not included) SCOPE OF DELIVERY 8-in-1 outdoor sensor Mounting material No base station included! Instruction manual

Available

£86.13*
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 8-day weather forecast (today and 7 following days) Extra large 48.3 cm (19”) colour display with slim bezel Wide-angle display for easy reading of measurements when wall-mounted Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£462.99*
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included) SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual

Available

£199.00*
BRESSER 4-Day 4CAST Wi-Fi Weather Station with 7-in-1 Outdoor Sensor
No more getting caught in the rain: The BRESSER 4-day 4CAST Wi-Fi Weather Station with a 7-in-1 sensor will give you advanced warnings about unsettled weather. Thanks to the built-in Wi-Fi function, the weather station can retrieve a wide range of data from the ProWeatherLive platform, which is used to produce a 4-day weather forecast - including high and low temperature as well as chance of rainfall. As well as weather forecast symbols, the weather station also shows all the data from your 7-in-1 wireless sensor, including the temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity. The data can be transmitted at a range of up to 150 metres and is displayed on the base station's stylish colour display.What's more, you can also share your local readings on ProWeatherLive so that other users can view your data. Data uploaded to ProWeatherLive can be accessed remotely using the mobile app. You can also connect the weather station to the Austrian weather portal AWEKAS so that you can transmit your weather data free of charge to your smart home system. To upload your readings, simply configure the settings as described in the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/  Stay up-to-date with the weather - with the 7-in-1 Wi-Fi weather station  Have you ever looked at the thermometer and wondered why you feel so cold or sweaty? There's a simple explanation: The perceived temperature is also affected by the wind and the humidity. This Wi-Fi weather station determines the perceived ('feels like') temperature using the measured readings. When the sun is shining, it's easy to forget about the risk of sunburn. The weather station displays the sunburn time in minutes so that you know how long you can sunbathe for safely. It also displays the current wind speed using the Beaufort scale. In addition to a weather forecast and current readings, you can also keep track of recent trends by saving the maximum and minimum values from a certain point in time. Alternatively, you can display the daily max/min values with a simple button press. As well keeping track of the outdoor conditions, you can also view the indoor humidity and temperature to ensure that you maintain an optimal indoor climate. Based on these precise measurements, the Wi-Fi weather station displays the comfort level using a small smiley symbol. You can then take effective measures to prevent the risk of mould or dry air. Feature-packed weather station with time and date display This Wi-Fi weather station with a rain and wind gauge does much more than just tell you about the latest weather conditions. It also displays the time, date, day of the week and moon phase, and is ideal as a bedside clock, featuring an integrated alarm function to wake you up in the mornings. If you need an extra few minutes in bed, simply press the snooze button to silence the alarm for five minutes. The weather station also features an ice/frost warning function that sounds the alarm 30 minutes earlier when the outdoor temperature drops below freezing. Keep ahead of the weather with the BRESSER 4-in-1 4CAST Wi-Fi weather sensor with a 7-in-1 sensor! If the 7 measurements provided by the outdoor sensor are not enough to satisfy your meteorological needs, you can purchase additional sensors to take a wider range of measurements. BASE STATION FEATURES 4-day weather forecast (today and 3 following days) with symbols Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground and Weather Cloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Wind direction display (current and predominant, 16 directions) UV level display Light intensity display Sunburn time display (in mins) Precipitation display (hourly, daily, weekly, monthly, total precipitation) Air pressure Weather data calibration Weather alert settings via ProWeatherLive server Maximum/minimum value memory (daily/total) Colour display Backlight with automatic dimming function Time, calendar, day of the week and moon phase display Alarm with ice/frost warning 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter, CR2032 back-up battery (not included) Dimensions: 187 x 118 x 18 mm   FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: Up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 390 x 465 x 174 mm DELIVERY CONTENT Base station Wireless sensor Power adapter Instruction manual

Available

£216.99*