See further than ever: LoRa weather station with 1.5 km range, 7 measurement parameters, 14-day forecast and Wi-Fi connectivity
- Garden weather station incl. long-range outdoor sensor with extra-high range
- Comprehensive local 24-hr/14-day weather forecast
- Measures temperature, humidity, rainfall, wind speed/direction, UV level, light intensity and air pressure
- Base station: 246 x 25 x 176 mm, 694 g / Sensor: 469 x 155 x 395 mm, 860 g
- Scope of delivery: base station, 7-in-1 LoRa sensor, power supply, mounting hardware, manual
- View local data and forecasts, share them online via Wi-Fi
- High/low value alarm, max./min. value memory and comfort indicator
- Sensor runs on solar panel – switches to 3x AA batteries (not included) in low light
- Time, date, moon phase and alarm clock with frost pre-alert
£299.00*
% £349.00* (14.33% saved)Available, delivery time: 10-12 working days
Product number:
15440
EAN:
4007922101316
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER 7-in-1 LoRa 4Cast Home Weather Station"
With the BRESSER 7-in-1 LoRa 4Cast Home Weather Station, you can monitor conditions up to 1.5 km away. LoRa technology makes this exceptional transmission range possible across open terrain, pulling in all seven measurement parameters from the precision outdoor sensor. The ProWeatherLive server adds a detailed 14-day weather forecast – complete with high and low temperatures and precipitation probability. Local visibility and cloud cover data also updates instantly on the crisp display, giving you a true all-round weather picture for smarter daily planning.
Serious range, serious data – the 7-in-1 outdoor sensor
The 7-in-1 outdoor sensor keeps tabs on outdoor temperature, humidity, wind speed and direction, rainfall, UV level and light intensity, sending every reading via LoRa technology over distances of up to 1.5 km straight to the base station. The adjustable solar panel keeps the solar weather station running longer between battery changes, while integrated bird spikesstop birds from perching on the outdoor sensor and fouling the readings.
Your data, shared with the world – the Wi-Fi weather station
The digital weather station connects via Wi-Fi to platforms including ProWeatherLive, Weather Underground and Weathercloud, putting your local measurements online for anyone to access via browser or app. Getting the LoRa wireless weather station up and running takes just minutes with the WSLink app. It also crunches the numbers on feels-like temperature, wind chill, heat index and dew point, plus wind strength rated on the Beaufort scale.
Indoor comfort, outdoor trends – all on one display
Worried about damp or dry air? The built-in comfort indicator tells you at a glance whether your indoor temperature and humidity are where they should be – perfect for home, office or anywhere else. The 22.8 cm True Black colour display with touch keys and night light mode also keeps you across relative and absolute air pressure. Max./min. value memory and a high/low value alert mean temperature swings never catch you off guard.
The little extras that make a big difference
Step outside prepared every morning – the built-in alarm clock with frost pre-alert gives you a heads-up the moment temperatures threaten to drop below zero. Daily sunrise and sunset times, moonrise and moonset and the current moon phase round out the picture, and optional additional sensors let the system grow as your needs do.
Get the full weather story, every day – with the BRESSER 7-in-1 LoRa 4Cast Home Weather Station.
FEATURES BASE STATION
Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
FEATURES OUTDOOR SENSOR
SCOPE OF DELIVERY
Serious range, serious data – the 7-in-1 outdoor sensor
The 7-in-1 outdoor sensor keeps tabs on outdoor temperature, humidity, wind speed and direction, rainfall, UV level and light intensity, sending every reading via LoRa technology over distances of up to 1.5 km straight to the base station. The adjustable solar panel keeps the solar weather station running longer between battery changes, while integrated bird spikesstop birds from perching on the outdoor sensor and fouling the readings.
Your data, shared with the world – the Wi-Fi weather station
The digital weather station connects via Wi-Fi to platforms including ProWeatherLive, Weather Underground and Weathercloud, putting your local measurements online for anyone to access via browser or app. Getting the LoRa wireless weather station up and running takes just minutes with the WSLink app. It also crunches the numbers on feels-like temperature, wind chill, heat index and dew point, plus wind strength rated on the Beaufort scale.
Indoor comfort, outdoor trends – all on one display
Worried about damp or dry air? The built-in comfort indicator tells you at a glance whether your indoor temperature and humidity are where they should be – perfect for home, office or anywhere else. The 22.8 cm True Black colour display with touch keys and night light mode also keeps you across relative and absolute air pressure. Max./min. value memory and a high/low value alert mean temperature swings never catch you off guard.
The little extras that make a big difference
Step outside prepared every morning – the built-in alarm clock with frost pre-alert gives you a heads-up the moment temperatures threaten to drop below zero. Daily sunrise and sunset times, moonrise and moonset and the current moon phase round out the picture, and optional additional sensors let the system grow as your needs do.
Get the full weather story, every day – with the BRESSER 7-in-1 LoRa 4Cast Home Weather Station.
FEATURES BASE STATION
- Local 24-hr/14-day forecast with high and low temperatures and precipitation probability via ProWeatherLive server
- Displays exact readings from the 7-in-1 outdoor sensor
(outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity) - Wi-Fi connection for publishing local weather data to ProWeatherLive (PWL), Weather Underground, Weathercloud or another platform
- Local visibility and cloud cover via ProWeatherLive server
- Beaufort scale for wind strength classification
- Weather forecast
- Indoor temperature (°C/°F) and humidity with comfort indicator
- Air pressure
- Max./min. value memory
- High/low value alert
- Feels-like temperature, heat index, wind chill, dew point
- Time, date, moon phase, alarm clock with frost pre-alert
- Sunrise/moonrise, sunset/moonset
- 22.8 cm True Black colour display (9")
- Expandable with optional sensors (see compatible accessories)
- Easy configuration and calibration via WSLink app
- Touch button controls
- Night light mode for controlling screen brightness at night
- Wall mounting or freestanding on a table
- Power supply: DC 5V 1A USB power adapter (included), backup battery: CR2032 (not included)
Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
FEATURES OUTDOOR SENSOR
- LoRa transmission range of up to 1.5 km (in open terrain without obstacles)
- Measures outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity
- With bird spikes
- Adjustable solar panel to extend battery life
- Battery-powered: 3x AA (not included)
- Water-resistant housing
SCOPE OF DELIVERY
- Base station
- LoRa outdoor sensor with bird spikes
- Power supply
- Mounting hardware
- Instruction manual
| 1) Footnote: | Batteries additionally required |
|---|---|
| 2) Footnote: | not included with your purchase |
| Barometric air pressure range (mbar) from: | 540 |
| Barometric air pressure range (mbar) up to: | 1100 |
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black |
| Display height (cm): | 12.5 |
| Display size (diagonal in cm): | 22.5 |
| Display width (cm): | 19 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , Automatic Internet Time , Beaufort Index , Cloudiness , Compatible with online weather platforms , High/low alarm , Ice warning , Indoor climate indicator , Max./min. value memory , Moon phases , Probability of rain , Sunrise and sunset , Time and date , Visibility conditions , WIFI , Weather forecast , Weather index , multicolour display |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.3 |
| Indoor sensor humidity measuring range from (%): | 10 |
| Inside temperature (°C) from: | -5 |
| Inside temperature (°C) up to: | 50 |
| Measurement accuracy inside humidity (%): | ± 5 |
| Measurement accuracy inside temperature (°C): | ± 1 |
| Measurement accuracy outside humidity (%): | ± 3.5 |
| Measurement accuracy outside temperature (°C): | ± 0.7 |
| Measurement function: | Barometric pressure , Humidity , Light intensity , Precipitation , Temperature , UV level , Wind Direction , Wind speed |
| Measurement range for indoor humidity sensor up to (%): | 90 |
| Measurement range for outdoor humidity sensor from (%): | 1 |
| Measurement range for outdoor humidity sensor up to (%): | 99 |
| Net Weight total (incl. accessories) (g): | 1778 |
| Net weight (without access.) (g): | 694 |
| Number of sensors included in the package: | 1 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 60 |
| Power supply 1): | Batteries , Mains adapter , Solar panel |
| Power supply unit included: | Yes |
| Sensor height (mm): | 469 |
| Sensor length (mm): | 395 |
| Sensor weight (g): | 860 |
| Sensor width (mm): | 155 |
| Supported weather cloud services: | ProWeatherLive , WSLink-App , Weather Underground , Weathercloud |
| Total height (mm): | 176 |
| Total length (mm): | 246 |
| Total width (mm): | 25 |
| Transmission range (m): | 1500 |
| Type of mounting: | Stand , Wall bracket |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER HCHO + VOC Sensor
£178.79*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700
If there’s something in the air, it’s probably not very good for us. This could be formaldehyde (HCHO) or Volatile Organic Compounds (VOC), which can enter our ambient air through things like furniture, materials, tobacco smoke, paints or adhesives. With the BRESSER HCHO + VOC Sensor, you can keep an eye on the air quality and take targeted measures to improve the situation. The integrated LC display of the sensor displays precise formaldehyde readings as well as the VOC level in the air.
Already have a compatible weather station from BRESSER? Then you can quickly connect the HCHO + VOC sensor and start to display the readings there as well.
Use the BRESSER HCHO + VOC Sensor as a stand-alone solution to keep an eye on your air quality, or as an extension for your weather station.
FEATURES
Sensor for formaldehyde measurement (HCHO) with VOC content (Volatile Organic Compounds)
Can be used alone or with select BRESSER weather stations
Integrated LC display (37 x 21 mm) for displaying HCHO values and VOC content
With battery level indicator
4 available channels
Range: up to 150 m
Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included)
Size: 82 x 120.5 x 43 mm
SCOPE OF DELIVERY
HCHO + VOC Sensor
3x AA rechargeable batteries, 1.2 V
USB cable
Weather station not included
Instruction manual
Available
%
BRESSER Spa and Pool thermometer
£36.89*
£36.99*
(0.27% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual
Available
%
BRESSER PM2.5/10 Air Quality Meter
£103.11*
£103.99*
(0.85% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700321070032207003230700324070035207003700700380070039009080700
A useful extension to your BRESSER weather station, or also ideal as a practical standalone solution: This PM2.5/PM10 particulate meter will help you to keep track of the air that you breathe. The high-precision meter reliably detects two types of health-relevant particulate matter that causes air pollution: particles with a diameter of less than 10 μm (PM10) and less than 2.5 μm (PM2.5). Measurements – the current reading and the average particulate concentration from the past 24 hours – are displayed on the built-in display and on your weather centre. The base station can be placed at a distance of up to 150 metres from the meter.
FEATURES
High-precision PM2.5/PM10 meter
Can be used alone or with select BRESSER weather stations
LCD screen for displaying the current reading and the PM2.5/PM10 concentration from the past 24 hours
Battery level indicator
4 available channels
Transmission frequency: 868 MHz
Range of up to 150 m
Power supply: 3 rechargeable AA batteries (included) or USB port (cable included)
DELIVERY CONTENT
PM2.5/PM10 air quality meter
3 rechargeable AA batteries
USB cable
Instruction manual
Incoming
%
BRESSER Water Detector
£42.57*
£42.99*
(0.98% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700
Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage.
Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed.
FEATURES
Water sensor for detecting water leaks
Loud 90 dB alarm tone
Range of up to 150 mCable length: approx. 140 cm
7 available channels
Wireless and compact design
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Water detector
Instruction manual
Available
%
BRESSER CO2 Sensor
£140.95*
£140.99*
(0.03% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154391544070026107002620700324070035207003700700380070039009080700
Add a breath of fresh air to your home or office just when you need it with the BRESSER CO2 Sensor. We all need healthy indoor air and enough oxygen to feel well and stay productive. That’s why it’s so important to air our spaces at regular intervals. The integrated display on the CO2 sensor quickly tells you when it’s the right time – you’ll see the carbon dioxide reading and level to give you an indication of the current air quality. The sensor also works well as an extension for a compatible weather station from BRESSER (not included). Connection is established quickly, and you’ll also be able to see CO2 levels on the screen.
As a stand-alone solution or an extension for your weather station – ensure optimal fresh air supply with the BRESSER CO2 Sensor.
FEATURES
Wireless sensor for CO2 measurement
Can be used alone or with select BRESSER weather stations
Integrated LC display (37 x 21 mm) for displaying the current CO2 reading and level
With battery level indicator
Power supply: USB connection and/or 3x AA rechargeable batteries, 1.2 V (included)
4 available channels
Range: up to 150 m
Size: 82 x 120.5 x 41 mm (W x H x D)
SCOPE OF DELIVERY
CO2 Sensor
3x AA rechargeable batteries, 1.2 V
USB cable
Weather station and app not included!
Instruction manual
Available
%
BRESSER Soil Temperature and Moisture Meter
£36.89*
£36.99*
(0.27% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual
Available
%
BRESSER Precision Thermo-Hygro Sensor
£33.06*
£33.99*
(2.74% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual
Incoming
%
BRESSER Lightning Detector
£42.57*
£42.99*
(0.98% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Incoming
Skip product gallery
Customers also bought
%
BRESSER Lightning Detector
£42.57*
£42.99*
(0.98% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Incoming
%
BRESSER Precision Thermo-Hygro Sensor
£33.06*
£33.99*
(2.74% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual
Incoming
%
BRESSER Researcher LCD Microscope
£472.05*
£472.99*
(0.2% saved)
A digital microscope easily brings the microcosmos up on the screen. For a long time, these instruments were common only in the beginner's range. Now, the successful and proven Researcher series makes the step into the digital microscopy world and offers new options for microscopy in schools, for hobby or work. The optics and mechanics is the same as already well estabished in the Researcher Bino and Researcher Trino microscopes. Incuding 4 DIN objectives, Abbe condenser, coaxial fine focus and crosstable, the Researcher LCD is suitable for use in the microscopy hobby as well as in teaching or other work related applications. The highest magnification when using the 60x objective (compares to 600x on non digital microscopes) is high enough to view small microorganisms as microalgae, flagellates and bacteria. Other magnifications (20x, 100x oil) can be added later. The Researcher LCD is also compatible with our plan-achromatic objectives designed for 160mm optical tube length.The integrated, modern Sony camerasensor IMX206 with 16MP gives a brilliant image with good contrast on the monitor. The user can change settings and capture images and video conveniently with the touch screen. Images with 16MP and Full HD video can be stored directly on SD card (SD card not supplied). The microscope also has a HDMI connection, so the image is easily shown on a big monitor, TV, beamer or smartboard. The results can be shared with a bigger audience in lectures or teaching.
FEATURESDigital microscope with integrated 7'' touchscreen
4 achromatic DIN objectives (RMS thread connection), parfocal length 45mm
Objective magnifications of 4x, 10x, 40x, 60x (40x and 60x with specimen protection)
Abbe condenser with iris diaphragm, fully adjustable and height adjustable
High-contrast screen with natural colours, 1024x600px resolution
Integrated Sony IMX206 camera sensor with 16MP
HDMI port for connection to an external monitor
SD card slot (supports up to 32GB, not included)
USB port (for data transfer to SD card)
SCOPE OF DELIVERYResearcher LCD Digital Microscope
Set of 5 prepared slides and 5 blank slides
Power adapter (EU) 5V 2A
HDMI cable
USB cable for transferring stored data to a PC
Dust cover
Available
BRESSER NightExplorer 15x70 Astronomy Binoculars
£467.00*
Whether you want to explore the night sky or make terrestrial observations during the day, the BRESSER NightExplorer 15x70 astronomy binoculars will ensure that you are perfectly equipped for all your outdoor adventures. The extra large lens diameter of 70 mm lets a large amount of light into the binoculars, while the 15x magnification ensures that you obtain highly detailed images of your observed targets. Fully multicoated optics ensure scattered light is kept to a minimum, so that you can enjoy a perfect view with the best possible optical performance. At a distance of 1000 metres, the field of view is 77 metres wide. The highly corrected eyepieces with 5 lenses in 3 groups produce vivid images with sharp edges.
Coating
The premium BaK-4 optics (barium crown glass) features a full multi-coating to increase light transmission and reduce reflections.
Focusing
Thanks to the individual eyepiece adjustment, you only need to focus the binoculars once. You can then enjoy a sharp image at infinity for the night sky. The binoculars also have a close focus, which you can set from a distance of 10 metres or more for close-up observations of your immediate surroundings.
Also suitable for glasses wearers
Thanks to the foldable eyecups, you can set the optimal distance between your eyes and the ocular lenses. If you wear glasses, this allows you to see the entire field of view of the Porro-prism binoculars. There is also a dioptre compensation of +/-8, which you can use to compensate for small differences in vision between your eyes.
Weatherproof and robust
Thanks to their waterproof design, the binoculars can be used in wet or foggy weather conditions, as water and moisture cannot enter the housing. The binoculars are filled with argon to stop the optics from fogging up. In addition, the ergonomic armouring provides a secure grip and protects the binoculars against impacts and knocks, making them ideal to travel with.
Portable design
The 15x70 Porro-prism binoculars come with an excellent lightweight aluminium tripod, with study ballhead mounting, to ensure wobble-free astronomical or terrestrial observations. Both the binoculars and the tripod can be stored in the sturdy padded backpack, which is also included in the set. This ensures that you can easily transport your gear to your desired vantage point, even if you have to go a long way to get there.
Discover the night sky and the wonders of nature with the powerful BRESSER NightExplorer 15x70 astronomy binoculars!
FEATURES
Astronomy binoculars for astronomical and terrestrial observations
High magnification and light-gathering power
Magnification: 15x
Lens diameter: 70 mm
Optical design: Porro
Full multi-layer coating
BaK-4 glass material
Rubber eyecups for spectacle wearers
Individual eyepiece adjustment
Highly corrected eyepieces for sharp-edged images
Field of view: 77 m (at a distance of 1000 m)
Close focus: from 10 m
Dioptre adjustment: +/- 8
Tripod connection thread
Includes Aluminium tripod
Includes Backpack
WHAT'S INCLUDED
Astronomy binoculars
Tripod
Backpack
Instructions with warranty information
Available
%
BRESSER Spa and Pool thermometer
£36.89*
£36.99*
(0.27% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual
Available
Skip product gallery
Customers also viewed
%
BRESSER 8-in-1 ClearViewTB Weather Station
£140.95*
£159.99*
(11.9% saved)
With this weather station, you always have a clear view of the climate! The BRESSER 8-in-1 ClearViewTB Weather Station impresses with its modern 8-in-1 sensor, which provides precise measurements directly from your garden or balcony. The highlight of summer: The heat stress index helps you plan your outdoor activities healthily on hot days. Other useful features such as comprehensive high/low alarm functions, history storage, and an integrated alarm clock with frost warning function round off the weather forecast experience. Practical: The time signal is received via the outdoor sensor – ensuring uninterrupted display of the date, time, and moon phase.
Carefree fun outdoors – with the heat stress index
When the summer sun shines, we are drawn outside. However, when temperatures climb too high, we must take care of our health. That's why the weather station calculates the Wet Bulb Globe Temperature from the most important heat factors in the environment. In addition to the precise value, the heat stress index shows you, through 4 warning levels, how to best navigate a hot day.
The weather station for maximum indoor climate comfort at home
Swiss precision technology: The thermo-hygrometer sensor from the renowned manufacturer Sensirion is made in Switzerland and provides very accurate measurements. This way, you can always keep track of the temperature and humidity indoors. The comfort indicator helps you create the perfect indoor climate with a smile.
Modern multisensor measures right outside your door
More accurate than any online weather service: The weather station with outdoor sensor provides detailed measurements right outside your door. Temperature, humidity, wind speed and direction, precipitation amount, UV level, light intensity, and Wet Bulb Globe Temperature (WBGT) – with this data, you get a complete picture of local weather conditions. In addition, the reliable weather forecast tells you what to expect weather-wise in the next 12 to 24 hours.
Stay up-to-date with weather warnings and storage
Is a storm approaching, or are your balcony flowers getting too much rain? To answer these and similar questions in time, the weather station offers a high/low alarm for all relevant measurement parameters. Do you also want to track weather developments? Simply view the history of the last 24 hours as well as the maximum and minimum values.
Keep an eye on the current weather now – with the BRESSER 8-in-1 ClearViewTB Weather Station!
FEATURES OF THE BASE STATION
Weather station with a 5.7" (14.5 cm) screen for comprehensive weather information
Display of precise measurement data from the 8-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT)
Heat stress index
Sensirion high-precision sensor for temperature and humidity
(Made in Switzerland)
Indoor comfort indicator
Weather forecast
Air pressure
Beaufort scale display
(Scale for wind force classification)
High/low alarm for all relevant measurement parameters
Max/min value storage
History storage (hourly for 24 hours)
Feels like temperature, heat index, dew point, wind chill factor with trend
Automatic time from the receiver on the outdoor sensor***
Date, day of the week, moon phase
Alarm clock with frost warning function
Expandable with up to 3 optional sensors (not included)
Power supply: Power adapter (included), CR2032 backup battery (not included)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
***PLEASE NOTE: This device receives the DCF time signal (Central European Time). However, you can easily adjust the time display to different time zones using the manual time setting.
FEATURES OF THE SENSOR
Measures temperature, humidity, wind speed, direction, precipitation amount, UV level, light intensity, and WBGT
Built-in DCF time signal receiver for optimal reception
Waterproof housing
High range up to 150 m
Battery-operated: 3 x AA batteries (not included)
SCOPE OF DELIVERY
Base station with power adapter
8-in-1 multisensor
User manual
Available
%
BRESSER Lightning Detector
£42.57*
£42.99*
(0.98% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198154407002610700262070032107003220700323070032407003520
The BRESSER lightning detector keeps you informed during stormy weather. It displays a light signal when it detects a lightning strike within a range of approximately 40 kilometres. To get the most out of the lightning detector, you can connect it to your BRESSER weather centre: from there, you can view the time since the last lightning strike, including the estimated distance, as well as the number of lightning strikes per hour. And to ensure that the lightning sensor is configured to your surroundings, you can choose from 3 different sensor sensitivity levels.
FEATURES
Lightning sensor for measuring lightning strikes
Displays a light signal when a lightning strike is detected
The following data can be viewed when connected to a compatible BRESSER weather centre:Time since last lightning strike, including estimated distanceNumber of lightning strikes per hour
LED indicator for data transmission
Range of up to 100 metres
Adjustable sensor sensitivity (high/medium/low)
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Lightning sensor
Instruction manual
Incoming
%
BRESSER Water Detector
£42.57*
£42.99*
(0.98% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198152011543915440156597002610700262070032007003210700322070032307003240700352070038009080700
Whether it’s the washing machine in your basement or the dishwasher in the kitchen, old appliances are susceptible to water leaks. The BRESSER water detector triggers a 90 dB alarm tone when it detects a leak. If the sensor is connected to your BRESSER weather station, a symbol will also appear on the display of your base station, allowing you to take action before the water causes serious damage.
Also a handy helper in aquaristics, where leaks occur frequently, for example when the sealing gasket on the external filter needs to be changed.
FEATURES
Water sensor for detecting water leaks
Loud 90 dB alarm tone
Range of up to 150 mCable length: approx. 140 cm
7 available channels
Wireless and compact design
Power supply: 2x AA batteries (not included)
DELIVERY CONTENT
Water detector
Instruction manual
Available
%
BRESSER Soil Temperature and Moisture Meter
£36.89*
£36.99*
(0.27% saved)
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual
Available
BRESSER 9-in-1 Outdoor Sensor with Adjustable Solar Panel
£165.00*
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199700261070026207003520
This high-quality replacement part will quickly get your weather station back in working order.
FEATURES
Measures temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity, air pressure, WBGT
Powered by large adjustable solar panel
Backup with 3x AA batteries if sunlight is low (not included)
Waterproof housing
Wireless range up to 150 m
SCOPE OF DELIVERY 9-in-1 outdoor sensor Mounting material No base station included! Instruction manual
Available
%
BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors
£93.65*
£122.99*
(23.86% saved)
With the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, innovation flows through your weather data. This clever device allows you to access readings from your existing BRESSER weather station or various optional sensors (not included), wherever you are. It automatically uploads them to the most popular online platforms via Wi-Fi. With the built-in thermometer, hygrometer, and barometer, you can also monitor air pressure, indoor temperature, and humidity indoors.
A great upgrade: add Wi-Fi to your weather station
Already own a BRESSER weather station, but missing Wi-Fi to complete your meteorology setup? Check below to see if the Wi-Fi Gateway El Niño is compatible with your model. If it is, you can quickly transform your existing device into a Wi-Fi-enabled weather station. You can also add optional sensors (not included) for online data monitoring to enhance your weather tracking.
Always available: your weather data on online platforms
Stay up-to-date automatically: Your weather data is uploaded directly to platforms like ProWeatherLive, Weather Underground, and Weathercloud via the Wi-Fi Gateway. This allows you to share your station’s readings with the wider weather community. A handy extra: Three years of membership with ProWeatherLive are included with your purchase.
Customise your professional weather station
Do you have your own idea of what a weather station should look like? With the Wi-Fi Gateway for up to 20 sensors, you can create your perfect setup. Just consult the list of compatible BRESSER devices, and you’ll soon have your customised weather expert at your fingertips.
Whether you're expanding or starting from scratch, with the BRESSER Wi-Fi Gateway El Niño for 5-in-1 and 7-in-1 sensors, you can either bring your current weather station online or build your very own.
FEATURES
Compact Wi-Fi Gateway for automatically uploading local weather sensor data to online platforms Receives measurement data from optional weather sensors (not included) Publish data on ProWeatherLive (includes 3 years membership), Weather Underground, Weathercloud, and one additional platform Access your data online anytime, anywhere Measures indoor temperature, humidity, and air pressure Configure Wi-Fi, time, weather platforms, calibration, and firmware updates easily via the WSLink app Compatible with the following BRESSER weather stations:Item No: WSX3001 / 7003600QT5000 / 7003600GYE000 / 7003600CM3000 / 7003100QT5000 / 7003100HZI000 / 7003100GYE000 / 7003100CM3000 / 9080700 / 9080600 / 9080500 / 7003900 / 7003800 / 7003700 / 7003510 / 7003500 / 7003360 / 7003300 / 7003240 / 7003230 / 7003220 / 7003210 / 7003200 / 7002620 / 7002590 / 7002586 / 7002585 / 7002582 / 7002581 / 7002580 / 7002571 / 7002551 / 7002525**Item No.: 7002513 / 7002512 / 7002511 / 7002510 / 9602510 - exclusively LOT No. 1164820 and higher**Item No: 7002550QT5000 / 7002550GYE000 / 7002550CM3000 - exclusively LOT No. 973504 and higher**Compatible with many optional sensors (not included): 1x professional sensor (Item Numbers: 7802580 / 7803300 / 7803200 / 7803510) Up to 7x thermo-hygro sensors (Item Number: 7009971), soil sensors (Item Number: 7009972), or pool sensors (Item Number: 7009973) (not included) Up to 7x water detectors (Item Number: 7009975) (not included) 1x lightning sensor (Item Number: 7009976) (not included) 1x PM2.5/10 sensor (Item Number: 7009970) (not included) 1x CO2 sensor (Item Number: 7009977) (not included) 1x HCHO + VOC sensor (Item Number: 7009978) (not included) Mounting: Stand or wall mount Power supply: USB cable with power adapter
SCOPE OF DELIVERY
Gateway USB cable USB power adapter User manual ** Item No. and LOT No. are shown on the device and the packaging.
Available
BRESSER LoRa Home Weather Station with 7-in-1 Sensor Stratus
£305.00*
With the BRESSER 7-in-1 LoRa Home Weather Station Stratus, you'll never be caught off guard by the weather again. This wireless weather station delivers an exceptionally long range and captures seven measurement parameters simultaneously – all visible at a glance on the brilliant 18.8 cm True Black colour display or straight on your smart device. Connect via Wi-Fi to the world's leading weather platforms and share your local readings with a global community. Your garden, your shed, your rules – LoRa range that goes the distance Tucked away at the bottom of the garden, perched on the shed roof, or out across a sprawling property – wherever you place the outdoor sensor, it keeps talking to the base station without missing a beat. LoRa stands for Long Range, a wireless technology that leaves conventional systems well behind when it comes to signal strength. With a reliable connection of up to 1.5 km across open terrain, you're free to position the sensor exactly where it suits you best. Seven readings, one sensor – serious weather data made simple Sunglasses or waterproof – what's it to be today? One look at your weather station with outdoor sensor settles it: outdoor temperature, humidity, wind speed, wind direction, rainfall, UV level and light intensity, all on a single screen. A moveable solar panel tops up the sensor's batteries to keep things running longer, while built-in bird spike guards stop unwanted visitors from interfering. Accurate, low-maintenance, and ready for wherever you need it. Sharp as a tack – weather data on a True Black display that means business Sunny spells or showers? A quick glance at the weather forecast on the display tells you exactly what to expect, while the live air pressure reading fills in the meteorological picture. The 18.8 cm True Black colour display also keeps tabs on your indoor temperature, humidity and comfort indicator – so you know what it's like inside and out. Calculated values including feels-like temperature, heat index, wind chill, dew point and the Beaufort scale round things off for a complete weather overview. Thoughtful touches for everyday life – your home weather station, connected Overnight frost on the way? The built-in alarm clock with frost pre-alert gives you a heads-up so nothing catches you out. The high/low value alarm and max./min. value memory mean weather extremes never slip through unnoticed. Via Wi-Fi, your readings flow automatically to ProWeatherLive (PWL), Weather Underground or Weathercloud. And with support for optional extra sensors, this LoRa Home Weather Station is ready to grow alongside you. Get the full picture, every time – with the BRESSER 7-in-1 LoRa Home Weather Station Stratus!
FEATURES BASE STATION
Wi-Fi connectivity for publishing local weather data to ProWeatherLive (PWL), Weather Underground, Weathercloud or another platform of your choice Indoor temperature (°C/°F) and humidity with comfort indicator Full readout of all 7-in-1 outdoor sensor measurements (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity) Beaufort scale for wind strength classification Weather forecast Air pressure Max./min. value memory High/low value alert Feels-like temperature, heat index, wind chill, dew point Time, date, moon phase, alarm clock with frost pre-alert 18.8 cm True Black colour display (7.4") Expandable with optional sensors (see compatible accessories) Easy setup and calibration via the WSLink app Wall-mountable or freestanding on a tabletop Night light mode for adjusting screen brightness after dark Power supply: DC 5V 1A USB power adapter (included), backup battery: CR2032 (not included)Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms.
FEATURES OUTDOOR SENSOR
LoRa transmission range of up to 1.5 km (open terrain, unobstructed) Measures outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity Bird spike guards included Moveable solar panel to extend battery life Battery-powered: 3x AA (not included) Water-resistant housing SCOPE OF DELIVERY Base station LoRa outdoor sensor with bird spike guards Power adapter Mounting hardware Instruction manual
Available
