BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC
7-in-1 Weather Station
- Receive your local weather data via 7-in-1 weather sensor
- Feels like indication calculated on wind chill, & heat index
- Long-range transmission up to 150m (450 ft.) 868 MhZ
- Temperature, humidity, wind speed and direction, UV, light
- Light intensity reading (Klux, Kfc, W/m2), UV index (0 – 16)
- Base: 180 x 136 x 23mm/Sensor: 344x394x136mm; 723 g
- Up to 3 additional sensors can be added, like pool and soil as well as additional thermo-/hygrometer sensors
- DCF radio controlled time synchronization with UK time offset
- Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level
- Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator
£122.99*
Available, delivery time: 10-12 working days
Product number:
7003100CM3000
EAN:
4007922070582
WEEE-Reg.-Nr.:
DE 34323861
Help & Service for your product
Here you will find quick help, answers to frequently asked questions, and direct access to support.
Service Portal
Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.
Service PortalSensor Form
In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.
Sensor Form
FAQ - Frequently Asked Questions
The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
Tips:
- Remove all batteries from the base station and the outdoor sensor.
- Wait at least 3–10 minutes.
- Insert the batteries into the base station.
- Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.
Tips:
- If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
- Do not place the base station near other electronic devices (this may interfere with reception).
- If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
- Briefly press the reset button on the back with a pen
- If necessary, place the station closer to a window, as reception inside buildings may be limited
Product information "BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC"
An exclusive Bresser designed weather station, the BRESSER 7-in-1 Weather Station ClimateScout RC Weather Station.
A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing.
The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation.
All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.
FEATURES (main unit):
Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity Measurement
A quick glance in the morning onto your BRESSER weather station gives you all the weather information you need for the day. Your current local outdoor temperature and humidity are shown as well as the current wind speed and direction. How much did it rain during the night? These and many others of the frequently asked weather questions are answered by a quick look onto the main station's display. Have you ever wondered why temperatures feel differently outside then you had imagined it would feel like? The new Feels Like Feature will help you with that. It takes the heat index or windchill into consideration and provides a calculated result to give you a much better indication of how the current weather actually feels outside. It sure beats running in and out and having to change clothing.
The Wind Gauge has been optimized and now measures in 360° and 16 directional points, giving you very precise wind readings. Furthermore, the radiation shield has been upgraded to enhance the temperature and humidity sensor circulation.
All in all this 7-in-1 complete set of weather station main unit and professional 7-in-1 weather sensor is the perfect weather station for those that want accurate and up to date information.
FEATURES (main unit):
- Clear professional display for time & full weather information
- Receive your local weather data via the 7-in-1 weather sensor via 868 MHz RF transmission frequency
- RCC time synchronization & automatic switch between standard and daylight saving time (DCF)
- For UK Users who can receive the European DCF time synchronization signal the time can be automatically received using the UK time offset function
- Buzzer alarm clock with ice pre-alert function
- Display time, calendar, weekday & Moon phase
- Able to set the moon phase display for Northern / Southern hemisphere
- Buzzer alarm clock with ice pre-alert function
- Indoor temperature (°C/°F) & humidity readings with comfort indication & trend
- Outdoor temperature (°C/°F) & humidity readings with trend
- Gust or Average wind speed (mph, m/s, km/h, knots), Beaufort & wind level
- Real time & dominant wind direction in 360° & 16-direction resolution
- UV index (0 – 16)
- Light intensity reading (Klux, Kfc, W/m2)
- Measure Rain rate, Hourly, Daily, Weekly, Monthly, Total rainfall (in/ mm) with indicator
- Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)
- Barometric pressure in relative or absolute readings (hPa, inHg, mmHg)
- Weather index for outdoor feels like, heat index, wind chill, dew point readings
- Max / Min memory records & past 24hrs hourly record
- Hi / Lo alert setting (indoor/ outdoor temperature & humidity)
- Alert setting (weather index, High wind-speed, High daily rainfall & Pressure drop)
- Flashing indicator for Hi/Lo alert warning on the LCD display UV and light calibration
- 5 languages for weekday and wind direction display (EN/ DE/ FR/ ES/ IT)
- Amber backlight
- Long-range transmission up to 150m (450 ft.)
- Supports up to 3 pcs wireless extra sensors , for instance 7009999 Thermo-/Hygrometer Outdoor Sensor, Pool Sensor SP6001LC2000, or Soil Sensor SP60020LC2000 (Not included)
- Wall mount/ desktop usage
- Product size: Main unit: 180 x 136 x 23 mm (W x H x D)
- Display VA size: 125x77mm (W x H)
- Battery requirements: Main unit: 4x AA ; Sensor 3x AA (Not included)
Measurement of Outdoor Temperature and Humidity, Wind Speed and Direction, Rain Gauge, UV and Light Intensity Measurement
- Up to 150 m transmission range using 868 MhZ transmission frequency
- Should be placed in an unobstructed location so that sun and rain data can be used properly
- Can be mounted on wall or post using the included adapter
- Product size: Sensor: 344 x 394 x 136 mm (W x H x D)
- 1x Main Unit, additional main units can be purchased using the BRESSER item codes 7003110CM3000 (black housing), 7003110GYE000 (white housing), 700311QT5000 (grey housing)
- 1x wireless 7-in-1 Professional Weather Sensor including mounting stand
| Assembly required: | Yes |
|---|---|
| Barometric air pressure range (mbar) from: | 5 |
| Barometric air pressure range (mbar) up to: | 11 |
| Batteries included: | No |
| Batteries required: | Yes |
| Colour: | black , silver , white |
| Display height (cm): | 7.7 |
| Display size (diagonal in cm): | 14.6 |
| Display width (cm): | 12.5 |
| Extended warranty (years): | 5 |
| Features: | Alarm clock function , Backlight , Beaufort Index , DCF time signal , History data storage , Ice warning , Indoor climate indicator , Max./min. value memory , Moon phases , Storm warning , Temperature alarm , Weather forecast , Weather index , Weekday display |
| GPS: | No |
| Height of the largest digit on the display (cm): | 1.2 |
| Indoor sensor humidity measuring range from (%): | 20 |
| Inside temperature (°C) from: | -5 |
| Inside temperature (°C) up to: | 50 |
| Measurement accuracy inside humidity (%): | ± 5 |
| Measurement accuracy outside humidity (%): | ± 3.5 |
| Measurement accuracy outside temperature (°C): | ± 1 |
| Measurement function: | Barometric pressure , Humidity (inside) , Humidity (outside) , Inside temperature , Light intensity , Outside temperature , Precipitation , UV level , Wind Direction , Wind speed |
| Measurement range for indoor humidity sensor up to (%): | 90 |
| Measurement range for outdoor humidity sensor from (%): | 1 |
| Measurement range for outdoor humidity sensor up to (%): | 99 |
| Net Weight total (incl. accessories) (g): | 1010 |
| Net weight (without access.) (g): | 335 |
| Outside temparature (°C) from: | -40 |
| Outside temparature (°C) up to: | 60 |
| Power supply unit included: | No |
| Rainfall measuring range (mm) to: | 9999 |
| Resolution inside humidity (%): | 1 |
| Resolution inside temperature (°C): | 0.1 |
| Resolution of outdoor humidity sensor (%): | 1 |
| Resolution outside temperature (°C): | 0.1 |
| Sensor height (mm): | 39.5 |
| Sensor length (mm): | 33.5 |
| Sensor weight (g): | 638 |
| Sensor width (mm): | 15 |
| Smartphone app: | No |
| Total height (mm): | 137 |
| Total length (mm): | 180 |
| Total width (mm): | 23 |
| Transmission frequency (MHz): | 868 |
| Transmission range (m): | 150 |
| Type of mounting: | Wall bracket |
| Water-repellent: | No |
| Waterproof 8): | No |
| Wind speed measuring range (km/h) to: | 180 |
Product and safety instructions
Manufacturer:
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede
Contact:
www.bresser.de
www.bresser.de
Warning notes
- WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
- If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
- The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
- CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
- Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
- The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery
Compatible Sensors
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
£33.99*
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers:
15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Available
BRESSER Spa and Pool thermometer
£36.99*
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
This device is compatible with weather stations with the following article numbers:
15196151971519815199152011543915440156591566016269164211642716444164791650816511700253170025417002580700258170025827002585700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX1001000000WSX1001CM3LC1WSX1001CM3LC2WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor
£93.99*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Available
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
£122.99*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601626916421164271644416511700254170025827002586700261070026207003200700321070032207003230700324070033007003350700336070034007003500700351070037007003800700390070044067902541790258679032007903210790322079032307903300790335079035007903510908060090807007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Measures the temperature and humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Solar power for longer battery lifespan
Range: up to 150 m
Power supply: 3x AA batteries (not included)
Dimensions: 420 x 170 x 213 mm
SCOPE OF DELIVERY
Wireless sensor with installation material
Base station not included!
Instruction manual
Available
BRESSER Soil Temperature and Moisture Meter
£36.99*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
Cable length: approx. 140 cm
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Available
BRESSER Precision Thermo-Hygro Sensor
£33.99*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Available
Skip product gallery
Compatible Base Stations
BRESSER Additional / Spare Base Station for Weather Station 15198
£159.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 1519615197151987002541700258270025867002620 7003100CM3000 7003100GYE000 7003100HZI000 7003100QT50007003200700321070032207003230700324070033007003360700350070035107003520 7003600CM3000 7003600GYE000 7003600QT500070037007003800700390070063009080600908070070031000000007003600000000 WSH4102 WSX3001 WSX3001CM3LC1 WSX3001CM3LC2 WSX3001000000Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time. FEATURES BASE STATION
24-hour and 14-day local forecasts with temperature highs, lows and rain probability (via ProWeatherLife server) Large 10-inch (25.4 cm) colour display Wi-Fi connection for publishing data to ProWeatherLive and Weathercloud Internet-based visibility and cloud cover Precise measurements from the outdoor sensor (not included) Indoor temperature and humidity with comfort indicator Air pressure display Heat stress index Beaufort scale for wind strength Weather indices: feels-like temperature, heat index, dew point, wind chill Max/min memory Weather alerts via ProWeatherLive Time, date, weekday and moon phase Sunrise/sunset and moonrise/moonset times Backlight with automatic dimmer WSLink app for easy Wi-Fi setup, data calibration and firmware updates Power supply: mains adapter (included), 1x CR2032 backup battery (not included) SCOPE OF DELIVERY
Base station
Stand
Power adapter
Available
BRESSER Additional / Replacement Base Station for Weather Station 7003300 from LOT No. 1605517 onwards
£134.00*
NOTE: This base station is compatible with BRESSER weather stations with item no. 7003300 AND LOT no. 1605517 and higher. You will find the item number and LOT number of your weather station printed on the back of the base station.Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station.
FEATURES7.4-inch colour display for detailed time and weather information
LC display contrast adjustment for different viewing angles
Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud
Indoor temperature (°C/°F) and humidity with comfort indicator
Display of outdoor temperature (°C/°F) and humidity
UV index with UV level indicator
Light intensity display
Sunburn time display (min.)
Wind speed display (gusts or average speed)
Beaufort scale level (scale for classifying wind speed)
Wind direction display (current and prevailing, based on 16 directions)
Rainfall display (hourly, daily, weekly, monthly, total rainfall)
Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)
Air pressure display
Feels-like outdoor temperature
Weather index for dew point, wind chill factor and heat index
Min./max. value memory (up to 24 hours)
High/low value alarm with flashing symbol on the display
Alarm clock with ice/frost warning
Time (internet time synchronisation), date, weekday and moon phase
Sunrise and sunset
Weather data calibration
3 display brightness levels: High / Low / Off
7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU)
Supports firmware updates
Security type: supports WPA3 encryption
Supports one 7-in-1 wireless professional sensor
Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000)
Dimensions: 202 x 138 x 38 mm / Weight: 510 g
Power supply: mains adapter (included) and 3x AAA backup batteries (not included)
Mounting: wall-mounted or stand
SCOPE OF DELIVERY
Base station
No outdoor sensor included!
Instruction manual
Available
BRESSER Additional / Replacement Base Station for the WSX3001 Professional Wi-Fi Weather Station
£245.99*
Would you like to view your weather data in an additional room? Are you looking for a gift to enable your neighbours to monitor your local weather? Or maybe the base station from your BRESSER Professional Wi-Fi Weather Station didn’t survive your recent move or your child’s latest tantrum? Whether you’re looking for an extension or a replacement, this base station will allow you to access all of your measurements on the large 20 cm screen. In addition to displaying the data from your 7-in-1 sensor (not included), it can also show the readings from up to 7 compatible additional sensors (not included).
Share your weather data worldwide
The base station can also be connected to online platforms such as Wundergound or Weathercloud so that you can share and access your weather data online. And with the German-language portal AWEKAS, you can integrate your measurements into your smart home system (configuration instructions: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/).
Additional base station – monitor the indoor climate in another room
If your existing base station is in the living room, you can place a second base station in the kitchen or your child’s bedroom to view your local weather data in an additional room. The base station features a built-in thermo-hygro sensor, which measures the ambient temperature and humidity and displays a smiley symbol to indicate the quality of the indoor climate. You can then take effective measures to prevent the risk of mould or dry air.
The additional base station is also ideal as a bedside clock. It features a built-in backlight that can be dimmed or switched off completely to ensure you get a good night’s sleep. And so that you wake up on time, it also has a practical alarm with a snooze function, as well as a frost warning function that triggers that alarm 30 minutes earlier when the outdoor temperature drops below -3°C – plenty of time to ensure that you get to work or school safely.
Access all the practical functions of your BRESSER Professional Wi-Fi weather station with this additional/replacement base station.
FEATURES
WiFi connection with internet time synchronisation and support for firmware updates
Publish your weather data on Wunderground or Weathercloud
Indoor temperature (°C/ °F) and humidity (%)
Displays the outdoor temperature (°C/ °F) and humidity (%)
Light intensity (Klux / Kfc / W/m²)
Displays the current UV index, exposure level and recommended protection
Displays the sunburn time (mins) based on the current UV level
Wind direction and speed (m/s; km/h; Knoten; mph)
Beaufort index (scale for measuring wind speed)
Air pressure with 24-hour history (hPa/inHg/mmHg)
Rainfall with history (day/week/month)
Graphical weather forecast for next 12-24 hours
Weather index (‘feels like’ function, dew point, heat index, wind chill factor)
Trend indicator shows the weather trends for the next few minutes
Visual comfort level indicator for room temperature and humidity
Phases of the moon
Sunrise and sunset times
Alarm with snooze function (5 minutes) and ice/frost warning
Weekday alarm
Min./max. memory (up to 24 hours)
LED backlight, amber-coloured
Wall bracket and table stand
Supports a 7-in-1 sensor and up to 7 indoor sensors (sensors are not included)
Dimensions: 215 x 172 x 29 mm and weight: 639 g
Power supply: Power adapter and 3x AAA batteries as backup batteries (batteries are not included)
Integrated Wi-Fi transmission to AWEKAS
Security protocol: supports WPA3 encryption for firmware version 1.09 and above
DELIVERY CONTENT
Base station with stand
Power adapter
Instruction manual
Available
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
£104.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information
Wi-Fi connection with internet time synchronisation
Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz
Publish your local weather station data on platforms such as Weather Cloud
Displays time, calendar, day of the week, and moon phase
Alarm function
Ice/frost warning
Indoor temperature (°C / °F) and humidity with comfort indicator
Outdoor temperature (°C / °F) and humidity display
UV level and light intensity display
Gust and average wind speed display
Wind direction display (based on 16 compass points)
Rainfall display (hourly, daily, weekly, monthly, total)
Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy)
Air pressure
Feels-like outdoor temperature
Weather index including dew point, wind chill, and heat index
Min./max. value memory (up to 24 hours)
Alarm with LED indicator
Weather calibration
3 display brightness levels: High / Low / Off
7 language options for the day of the week
Supports firmware updates
Security type: supports WPA3 encryption from firmware version 2.0
Supports a wireless 7-in-1 professional weather sensor (not included)
Supports up to 7 additional wireless sensors (not included – item no.: 7009999)
Easy setup and updates via WSLink app
SCOPE OF DELIVERY
Base station
Power adapter
No outdoor sensor included!
Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7002586
£150.99*
Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Station and now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, time and moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours.
Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air
Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself.
On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller.
Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location.
FEATURES
8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information
WiFi connection with internet time synchronisation
Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz
Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure
External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity
Precise wind direction display (16 directions)
Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow)
Beaufort index display (scale for measuring wind speed)
Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation)
Room climate indicator Weather index display for dewpoint, windchill factor and heat index
Time, calendar, day of the week and moon phase display
Alarm function with snooze button
Ice/frost alarm
Min./max. memory (up to 24 hours)
Alarm with LED indicator
3 different display brightness levels High/Low/Off
7 languages for days of the week
Firmware updates supported
Supports up to 7 additional wireless sensors (optional) (item no. 7009999)
Integrated WiFi transmission to AWEKAS
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER Additional / Spare Base Station for the Wi-Fi HD TFT Professional Weather Station 7003500
£199.00*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
7-inch HD TFT display (17.8 cm) with versatile display modes Multi-channel overview showing live data from all wireless sensors Displays accurate readings from the 7-in-1 outdoor sensor (not included): (temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity) Seamless WLAN transmission to the AWEKAS weather portal (German interface) WLAN for sharing data on up to 3 platforms (Weather Underground, ProWeatherLive, Weathercloud, plus one additional) Graphical weather history (24 hours / 30 days) Historical data exportable to a USB drive (USB not included) Indoor temperature (°C/°F) and humidity, with trend tracking Beaufort scale for wind classification Detailed weather forecasts Air pressure monitoring Weather indices: feels-like temperature, dew point, wind chill, heat Daily and overall max/min memory Weather data calibration options Hi/Lo alarm settings for extreme conditions Custom labels for additional sensors Syncs with internet UTC time; time zone selection included Alarm clock with volume control and frost alert Time, calendar, weekday, and moon phase displays Sunrise/sunset and moonrise/moonset information Customisable display settings: light or dark mode Adjustable display brightness and contrast; day and night modes Supports six languages: English, German, French, Italian, Spanish, Dutch OTA and USB firmware updates Works with up to 7 sensors (not included, available separately) Mounting options: desktop stand or wall mounting Powered by mains adapter (included) and a CR2032 backup battery (not included)
SCOPE OF DELIVERY Base station Power adapter No wireless sensorincluded! Instruction manual
Available
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
£263.99*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Large 17.8 cm (7-inch) HD TFT colour display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Publish your weather data via Wi-Fi on up to 3 weather platforms
(ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform)
Measures the indoor temperature and humidity
Displays the graphical weather trend (last 24 hours)
Weather forecast
Beaufort scale display (scale for classifying the wind speed)
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory
Trend display for all temperature and humidity measurements
Historical data log, exportable to USB drive (not included)
Individually configurable weather alarm for different measurements
Weather data calibration
Synchronization with Internet UTC time with time zone selection
Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times
Built-in alarm with ice/frost alarm
Choose between dark or light display
Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually)
7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 wireless sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Power adapter (included), CR2032 backup battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER Additional / Replacement Base Station for the 7003230 8-Day 4CAST XL Wi-Fi Weather Station
£462.99*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
8-day weather forecast (today and 7 following days)
Extra large 48.3 cm (19”) colour display with slim bezel
Wide-angle display for easy reading of measurements when wall-mounted
Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud
Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server
Local visibility and cloud cover via ProWeatherLive server
Indoor temperature (°C/°F) and humidity
Displays precise measurement data from the 7-in-1 solar outdoor sensor
(Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Gusts and average wind speed
Beaufort index (scale for measuring wind speed)
Sunburn time (in mins)
Air pressure
Weather data calibration
Weather alarm function via ProWeatherLive server
Maximum/minimum value memory (daily/total)
Backlight with automatic dimming function
Displays the time, date, day of the week and moon phase
Sun/moonrise, sun/moonset
Alarm with ice/frost warning
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports up to 7 additional sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Mains plug (included), CR2032 back-up battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
£134.00*
NOTE: This base station is compatible with weather stations with item no. 7003300 AND LOT no. up to 1599948. You can find the item and LOT number of your weather station printed on the back of the base station.
Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day.
Built-in alarm
The additional base station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C.
Create the perfect indoor climate with the additional base station
In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate.
Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station.
BASE STATION FEATURES
7.4-inch colour display with detailed time and weather information
LCD display with adjustable contrast for multiple viewing angles
Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud
Indoor temperature (°C/°F) and humidity with comfort indicator
Displays the outdoor temperature (°C/ °F) and humidity
UV index with UV level indicator
Light intensity display
Sunburn time display (in mins)
Wind speed display (gusts or average wind speed)
Beaufort scale display (scale for classifying the wind speed)
Wind direction display (current and predominant, 16 directions)
Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation)
Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow)
Atmospheric pressure display
Perceived outdoor temperature
Weather index for dewpoint, windchill factor and heat index
Min./max. memory (up to 24 hours)
High/low alarm with flashing symbol on the display
Alarm with ice/frost warning
Time (synced via the Internet), date, day of the week and moon phase
Sunrise and sunset
Weather data calibration
3 different display brightness levels High/Low/Off
7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU)
Supports firmware updates
Supports 7-in-1 wireless sensor (not included)
Supports up to 7 additional wireless sensors (not included)
Dimensions: 202 x 138 x 38 mm / Weight: 510 g
Power supply: Power adapter (included) and 3x AAA backup batteries (not included)
Installation: Wall or stand
DELIVERY CONTENT
Base station
Power adapter
External sensor not included!
Instruction manual
Available
Skip product gallery
Spare Parts
Grey Wind Vane
£15.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000
Available
Black Wind Cups
£15.99*
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT50007004406780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000
Available
Skip product gallery
Customers also bought
BRESSER Soil Temperature and Moisture Meter
£36.99*
This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Wireless and compact soil sensor
Measures the soil humidity
Measures the soil temperature
Transmission interval: 60 seconds
Extra-long range of up to 150 metres
Cable length: approx. 140 cm
7 available channels
LED indicator for data transmission
Weatherproof housing
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Soil sensor
Instruction manual
Available
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
£33.99*
Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz.
Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station.This device is compatible with weather stations with the following article numbers:
15659162691642116427164447002531700254170025717002582700258670026107002620700315070032007003210700322070032307003240700330070034007003500700351070035207003700700380070039007004406700630079025317902541790258079025817902585790258679032007903210790322079032307903300790350079035109080600908070090808007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2
Compatible with the following weather stations, but exclusively with firmware version V1.11 or higher (download available on the product page of the BRESSER homepage): 700258070025817002585WSX1001000000WSX1001CM3LC1WSX1001CM3LC2
FEATURES
Temperature measuring
Humidity measuring
7 channels settable
RC frequency: 868 MHz
Extra long radio range of 150 meters!
Suitable for smarthome systems by Tuya
Powered by battery; 2x AA (LR6) (not included!)
SCOPE OF DELIVERY
Remote sensor
Available
BRESSER Precision Thermo-Hygro Sensor
£33.99*
This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Temperature measurement function
Humidity measurement function
7 available channels
Built-in display, can also be used as a standalone solution without a weather centre
Temperature range: -20 ~ 60℃
Wireless frequency: 868 MHz
Ultra-long range of up to 150 m
Battery-operated with 2x AA batteries (not included)
DELIVERY CONTENT
Outdoor sensor
Instruction manual
Available
BRESSER Spa and Pool thermometer
£36.99*
Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home.
This device is compatible with weather stations with the following article numbers:
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
FEATURES
Floating pool sensor for measuring the water temperature
LCD display for displaying the temperature (°C/°F)
Wireless frequency: 868 MHz
Wireless transmission range of up to 30 m to optional base station
7 available channels
Waterproof (IPX7)
Powered by 2x AA batteries (not included)
DELIVERY CONTENT
Pool thermometer
Instruction manual
Available
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
£44.00*
If you have a 7-in-1 ClimateScout Weather Station, this additional base station allows you to access the full range of functions and weather data in an additional room. For example, by placing the additional base station in your bedroom, you can view the measurements from your outdoor sensor and decide what to wear for the day based on the weather conditions. The original base station can then be kept in your living room to give everyone in your household an overview of the outdoor temperature, outdoor humidity, wind speed, wind direction, rainfall, UV and light intensity. With this additional base station, you can see what the weather is doing from both rooms! The base station also has a sleek, elegant design that was designed specially for BRESSER and fits in with all interior styles.
Monitor your indoor climate with an additional ClimateScout base station
In addition to the data from your outdoor sensors (not included), the additional base station also shows you indoor measurements. Is mould likely to develop in your bathroom? Is the air in your baby's bedroom too dry? Simply place the additional station in the corresponding location and the built-in sensor will show you the indoor temperature (°C/°F), humidity and air pressure. Happy or sad smiley, with or without drops: Thanks to the graphical indoor climate indicator, you can quickly ascertain the current comfort level and take appropriate action to improve your indoor climate. There is also a weather alarm, which allows you to set your desired maximum and minimum weather values independently of your other base station. Your additional base station will inform you when the temperature, humidity, rainfall, wind speed and other values reach your preset limits.
Radio-controlled clock
In addition to a modern design, the weather console also features a radio controlled clock that syncs the time via a DCF signal and automatically switches between winter and summer time. If you need an early start, the base station also has a built-in alarm. If you need a few extra minutes in bed, simply press the snooze button to silence the alarm for 5 minutes. During the winter, you can enable the frost alarm, which makes the alarm go off 30 minutes earlier when the outdoor temperature drops below -3 °C. The intuitive display also shows The day of the week, date and phases of the moon at the top of the screen.
View your weather data in an extra room with this additional base station!
BASE STATION FEATURES
Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency
Clear, professional display with time and comprehensive weather information
Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours)
Room climate indicator
Maximum and minimum value alarm
Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals
DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time
Alarm with snooze function and frost warning
Time, calendar, day of the week and moon phase display
Min./max. memory (up to 24 hours)
Backlight
Displays the graphical weather trend (12 hours)
Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2)
Displays the Beaufort index (scale for measuring wind speed)
Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator
Weather index display for dewpoint, windchill factor and heat index
Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT)
Can be wall-mounted or placed on desktop
Base station dimensions: 180 x 135 x 22 mm (W x H x D)
Display size: 125 x 77 mm (W x H)
Power supply: 4x AA (not included)
DELIVERY CONTENT
Additional base station
External sensor not included!
Instruction manual
Available
Variants from £34.00*
Skip product gallery
Customers also viewed
BRESSER Wi-Fi ClearView Weather Station with 7-in-1 Sensor
£226.99*
The new BRESSER WIFI ClearView Weather Station with 7-in-1 sensor offers a very comprehensive range of weather data. The multifunctional outdoor sensor can easily be installed with the included mounting accessories!
The outdoor sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, precipitation, as well as UV level and light intensity via 868 MHz frequency to the base station.
The base station shows a large variety of current and historical local weather data on its 8.3'' TRUE BLACK colour display. The latter allows internal storage and evaluation of the measurement data over a period of 24 hours. A very reliable forecast for the upcoming 12h is calculated by your local weather data which will be displayed on the base station. The WIFI function allows users to share their local data via apps such as 'Weather Underground'' or ''Weather Cloud''. In addition, the WIFI function enables Internet Time Synchronization and firmware updates.
An alarm can be individually programmed for maximum and minimum values, which triggers both an acoustic and a light alarm signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated for frost/ice warnings. A poor indoor climate often poses health risks, especially for children and elderly people. The BRESSER WIFI ClearView Weather Station offers a smart feature for this. The indoor climate indicator informs about current indoor climate conditions by means of the room climate indicator.
For all ''moon addicts'' the different moon phases are also displayed. An alarm clock with snooze function is also included in the range of functions.
This station can also be connected to the mulitlingual portal AWEKAS* (*EU customers only) . Optionally you can transmit your weather data to AWEKAS or call up your weather data worldwide. Transfer data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home home control system. FEATURES8.3'' colour display (19.3 x 9.3 cm) for detailed time and weather information
WIFIconnection Internet time synchronization Receives weather data from the 7-in-1 sensor and the wireless thermo-hygro sensor via 868 MHz Publish your local data from your weather station on platforms like 'Weather Underground'', ''Weather Cloud" and "AWEKAS*" (*EU customers only)Display of time, calendar, weekday and moon phase
wake-up function Ice/Frost warning
Interior temperature (°C / °F) Humidity with comfort display
Outdoor temperature (°C / °F) Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact display based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index Min/max value memory (up to 24 hours) Alarm with LED display
Weather Calibration 3 different display brightness levels: High / Low / Off 7 languages for the weekday Support of firmware updates Security type: supports WPA3 encryptionSupport a wireless 7-in-1 sensor with 150 m transmission range (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Integrated WIFI transmission to AWEKAS* (*EU customers only) What's IncludedBase station Outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cable, batteries not included
Available
BRESSER Wi-Fi TB 7-in-1 RC Weather Station
£145.34*
Come rain or shine, the BRESSER WIFI TB 7-in-1 RC Weather Station keeps you fully informed about the weather. The 7-in-1 outdoor sensor accurately measures temperature, humidity, wind direction and speed, precipitation, UV level, and light intensity, displaying the data on a well-arranged screen. However, thanks to the “WiFi connection”, you can also share your data on online platforms. Additionally, the graphical weather forecast and different alert settings ensure you're always ready for any weather.
Accurate weather forecast at a glance
Get a quick overview with the graphical weather forecast feature of the WiFi weather station. That’s how you’ll always know what to expect in the next few hours right outside your door. The additional weather warning functions alert you to high winds, heavy rainfall, and significant pressure drop.
Stay climatically up-to-date with the WiFI weather stationThe convenient WiFi feature lets you keep track of your local weather anytime and anywhere. Publish your data on platforms like WeatherUnderground and Weathercloud and access it from any location – perfect for keeping up with local weather while traveling! The WSLink App makes configuration and updates a breeze.
Optimize your indoor climate with this BRESSER weather stationIndoor temperature and humidity significantly affect comfort. This wireless weather station helps monitor your home or office environment. Quickly determine whether ventilation is needed based on the precise indoor temperature and humidity readings, including trends and a max/min value memory. The high/low value alert function let’s you know when preset thresholds are reached.
Transform your weather station into a versatile toolEnhance your WiFi weather station by adding up to 3 optional sensors (not included). Use a thermo-hygrometer for additional room measurements, or simplify your gardening and outdoor activities with an optional soil or pool thermometer (not included). Find compatible devices in the BRESSER accessories range!
Get the BRESSER WIFI TB 7-in-1 RC Weather Station now for comprehensive insights into weather and indoor climate conditions!
FEATURES BASE STATION
Weather Station with 7-in-1 outdoor sensor for comprehensive weather data
WiFi for accessing and sharing local weather data on weather platforms
(WeatherUnderground, Weathercloud, and one more platform)
Displays detailed readings from the 7-in-1 outdoor sensor
(Outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level, light intensity)
Indoor temperature (°C/°F) and humidity with trend
Weather forecast
Air pressure with history and trend
Max/min value recording
Temperature and humidity high/low alerts
Weather warnings for wind, precipitation, and pressure changes
Displays time, date, weekday, and moon phase
Built-in alarm clock with snooze feature
Easy set-up and updates via WSLink app
Compatible with up to 3 additional thermo-hygro, soil, and pool sensors (not included, available separately in BRESSER accessories)
Powered by a mains adapter (included) and 1x CR2032 backup battery (not included)
FEATURES 7-IN-1 OUTDOOR SENSOR
Measures temperature, humidity, wind speed, wind direction, precipitation, UV level, and light intensity
Durable, waterproof design
Effective range up to 150 m
Requires 3x AA batteries (not included)
SCOPE OF DELIVERY
Base station with power adapter
7-in-1 wireless sensor
Instruction manual
Available
BRESSER Weather Station 5-in-1, black
£122.99*
The new BRESSER Weather Station 5-in-1 combines in a unique way a compact design with an extensive information service. The very
compact and multifunctional outdoor sensor requires only little space and thus can be placed almost anywhere. A pipe clamp and screws for
the attachment at poles (pipe diameter of about 25-33 mm) as well as a stand are already included!
The 5-in-1 outdoor sensor transfers reliably all measured values for wind speed, wind direction, humidity, temperature and
precipitation rate to the base station. On the clearly structured display of the base station not only these values can be read but also a
multitude of history data. The latter allows the internal storage and evaluation of measured data over a period of 24 hours. From the collected
measured data, the weather station calculates a very reliable local weather trend forecast for the next 12 hours, depicted by six graphic symbols
on the display. For minimum and maximum values an individual alarm can be programmed, which gives an acoustic and a light signal when the defined
value is reached. For outside temperatures of -3 °C and below a special alarm for frost/ice warning can additionally be activated.
A poor indoor climate often involves health risks especially for children and the elderly. The BRESSER Weather Station 5-in-1 offers you a smart feature to deal with this. The indoor climate indicator informs steadily about the indoor climate with a symbol.
Furthermore, the BRESSER Weather Station 5-in-1 features a radio controlled time and date setting (DCF time signal). Already a few minutes after switching the device on the current Central European Time (CET) and the date with weekday are displayed automatically. For the ''moonstruckers'' also the different phases of the moon are shown. An alarm function with snooze mode is also integrated.
FEATURES
5-in-1 outdoor multi sensor
Inside temperature (°C/°F) and humidity
Outside temperature (°C/°F) and humidity
Wind direction and speed
Graphical weather trend display (12 hours)
Beaufort index (scale for the classification for wind speeds)
Precipitation rate with history (day/week/month)
Air pressure with history (24 hours)
Heat index
Dew point
Radio controlled time and date setting
Phases of the moon
Alarm function
Ice/frost warning
Min/Max memory (up tp 24 hours)
LED background light, amber
SCOPE OF DELIVERY
Base station with stand
5-in-1 Multisensor with mounting material
Manual
Additionally, 6 AA batteries are required (not included)
PLEASE NOTE: If you should ever need a new outdoor sensor for this product, please check the LOT number on your device or on the packaging:
Weather Stations with LOT number 1156742 and lower are compatible with the outdoor sensor with item number 7802520.
Weather Stations with LOT number 1156743 and higher are compatible with the outdoor sensor with item number 7802580.
Available
BRESSER 7-in-1 Outdoor Sensor
£93.99*
This high-quality replacement part will quickly get your weather station back in working order.IMPORTANT: Will this part fit your weather station? This replacement part is only compatible with certain weather station models. Below you'll find an overview of all compatible devices. Simply compare the article number on your device with the models shown to ensure the replacement part is suitable.
Compatible with the following devices:151971519815199156601642116427164441651170025417002582700258670026107002620700330070033607003400700350070035107004406780001179025417902586790323079033007903500790351090806007003100000000700311000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSX3001000000WSX3001CM3LC1WSX3001CM3LC2FEATURES
Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre
Measures the outdoor temperature and outdoor humidity
Measures the wind speed, wind direction and rainfall
Measures the UV level and light intensity
Transmission range of up to 150 metres
Place in an unobstructed location in order to obtain accurate sunlight and rain data
Power supply: 3x AA batteries (not included)
SCOPE OF DELIVERY
Wireless sensor
Mounting materials
Base station is not included!
Instruction manual
Available
BRESSER Additional / Replacement Base Station for 7003510 MeteoChamp Weather Station
£263.99*
NOTE: This base station is compatible with weather stations with the following item numbers. You’ll find your weather station’s item number printed on the back of the base unit. 7002541700258270025867002620700320070032107003220700323070032407003300700336070035007003510700370070038007003900700630090806009080700700310000000070036000000007003100CM30007003100GYE0007003100HZI0007003100QT50007003600CM30007003600GYE0007003600QT5000WSH4102WSX3001000000WSX3001CM3LC1WSX3001CM3LC2Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES
Large 17.8 cm (7-inch) HD TFT colour display with various display modes
Multi-channel overviews for displaying all live data from the wireless sensors
Publish your weather data via Wi-Fi on up to 3 weather platforms
(ProWeatherLive, Weather Underground, Weathercloud / 1 additional user-defined platform)
Measures the indoor temperature and humidity
Displays the graphical weather trend (last 24 hours)
Weather forecast
Beaufort scale display (scale for classifying the wind speed)
Air pressure
Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index)
Maximum/minimum value memory
Trend display for all temperature and humidity measurements
Historical data log, exportable to USB drive (not included)
Individually configurable weather alarm for different measurements
Weather data calibration
Synchronization with Internet UTC time with time zone selection
Displays the time, calendar, day of the week, moon phase, sunrise/moonrise, sunset/moonset times
Built-in alarm with ice/frost alarm
Choose between dark or light display
Adjustable display brightness and contrast, day, auto dim and night modes (on/off time can be set individually)
7 selectable display languages (EN, DE, FR, IT, ES, NL, CZE)
Supports OTA firmware updates (Wi-Fi) and USB firmware updates (system)
Supports up to 7 wireless sensors (not included, see accessories)
Mounting options: Can be placed on tabletop with built-in stand or wall-mounted
Power supply: Power adapter (included), CR2032 backup battery (not included)
SCOPE OF DELIVERY
Base station
Power adapter
External sensor not included!
Instruction manual
Available
BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise
£179.00*
With the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise, you’ll never be caught out by the weather. This sleek Wi-Fi weather station brings all the essentials - from climate to time data - together on a crisp 7.4-inch (18.8 cm) display. And when the mercury rises, the WBGT with heat stress level helps you keep your cool. Thanks to Wi-Fi connectivity, your data is always at hand - whether you’re out and about or taking it easy on the sofa.
Your garden, your weather report
Why rely on forecasts from miles away when your own outdoor sensor tells the full story? This weather station with outdoor sensor collects temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT straight from your surroundings. With a 150 m range and a weatherproof housing, it’s easy to find the perfect spot for this powerful all-rounder.
WBGT - a hot topic worth watching
When the heat is on, your body needs extra care. That’s why the WBGT reading (Wet Bulb Globe Temperature) is so valuable. This digital weather station combines air temperature, mean radiant temperature and wet-bulb temperature to show how effectively your body can cool itself. If this last value stays above 35 °C for too long, it’s time to slow down.
Whether you’re exercising, gardening or enjoying the outdoors, this professional weather station gives you round-the-clock WBGT values. The heat stress index also lets you know intuitively when to take it easy.
Keep the indoors in check too
This isn’t just about the great outdoors - the home weather station also keeps tabs on your indoor climate. The built-in thermometer monitors room temperature, the hygrometer measures humidity, and the comfort indicator gives you an instant smiley-face check on your air quality. Meanwhile, the integrated barometer tracks air pressure, warning you when a change in the weather is brewing.
All the extras you’d expect from a pro
This garden weather station doesn’t stop at the basics. Alongside exact measurements and a graphical forecast, it shows useful values such as feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals just how breezy it will feel outdoors, while the max./min. memory tracks trends over time. Customisable high/low alarms alert you to conditions that matter most. And here’s a clever winter perk: when the temperature outside dips below -3°C, the alarm wakes you 30 minutes early so you can take your time on frosty mornings.
Meet your all-in-one weather expert - the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise.
FEATURES BASE STATION
Wi-Fi connection for sharing local weather data on Weathercloud Displays readings from the 8-in-1 solar outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Graphical weather forecast Air pressure Indoor temperature and humidity with comfort indicator Heat stress index Beaufort scale (wind force classification) Weather index (feels-like temperature, heat index, dew point, wind chill) Max./min. memory High/low alarms Automatic time, date and moon phase via internet sync Alarm clock with frost alert WSLink app for easy Wi-Fi setup, data calibration and firmware updates Supports up to 6 additional optional thermo-hygro sensors (not included, see BRESSER accessories) Power supply: USB cable with mains adapter (included), CR2032 backup battery (not included)
FEATURES SENSOR
Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Weatherproof housing Range up to 150 m Powered by 3 x AA batteries (not included)
SCOPE OF DELIVERY
Base station with mains adapter 8-in-1 outdoor sensor Instruction manual
Available
NATIONAL GEOGRAPHIC Wi-Fi Colour Weather Station with 7-in-1 Sensor
£198.99*
The new NATIONAL GEOGRAPHIC WIFI Colour Weather Station with 7-in-1 professional outdoor sensor offers a comprehensive information service. The multifunctional outdoor sensor can easily be installed using the installation accessories supplied!
The sensor reliably transmits measured values for wind speed, wind direction, humidity, temperature, amount of precipitation, as well as UV level and light intensity to the base station via 868 MHz frequency. The console's clearly structured 5.7" colour display shows a large variety of measured local data as well as your station's historically measured values. A reliable local weather forecast is calculated and displayed using weather symbols on the console display for the upcoming 12h. The WIFI function allows users to share their local data via online platforms such as "AWEKAS", ''Weather Underground'' or ''Weather Cloud''. Furthermore, the WIFI function enables Internet time synchronization and firmware updates. You can set a temperature alarm for maximum and minimum values, which triggers both an acoustic and a light signal when the specified value is reached. For outside temperatures from -3°C, a special alarm can also be activated to warn of frost/ice.
A poor indoor climate often poses health risks, especially for children and older people. The BRESSER WIFI colour Weather Station offers a smart feature for this as well. The indoor climate indicator always informs about the indoor climate by means of a symbol.
For all ''moon addicts'' the different phases of the moon are also displayed. An alarm clock with snooze function is also included in the range of functions. You can transmit your weather data to the European Weather platform AWEKAS where you can also retrieve your weatherdata worldwide. Transmit data such as air temperature, humidity, soil temperature and humidity, pool water temperature to your smart home control system, depending on which sensors you have additionally purchased. This can be done easily and free of charge via our partner AWEKAS. This can be set up under the following link: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ PROPERTIES 5.7'' colour display for detailed time and weather information WIFI connection with Internet time synchronisation Receives weather data from the 7-in-1 professional sensor and the wireless thermo-hygro sensor via 868 MHz Publish the local data of your weather station on the internet via websites such as AWEKAS, Weather Underground and Weather Cloud Display of time, calendar, weekday and moon phase Wake-up function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort display Outdoor temperature (°C / °F) and humidity display Display of UV level and light intensity Display of gusts and average wind speed Wind direction (exact indication based on 16 directions) Rainfall (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Perceived outdoor temperature
weather index for dew point, wind chill factor and heat index via the Feels Like functionMin/max value memory (up to 24 hours) Alarm with LED display 3 different display brightness levels: High / Low / Off Support of firmware updates Security type: supports WPA3 encryption as of firmware 2.0Support a 7-in-1 professional multi-sensor (included) Supports up to 7 additional wireless sensors (optional) (Art.-No.: 7009999) Easy set-up and updates via WSLink appIntegrated WIFI transmission to AWEKAS SCOPE OF SUPPLY Base station (Console)Professional outdoor sensor 7-in-1 incl. mounting accessories Power supply unit and cableBatteries are not included
Available
