Skip to main content Skip to search Skip to main navigation
Please note that our minimum order value is £50

BRESSER 7-in-1 Exclusive Weather Station ClimateScout RC

Help & Service for your product

Here you will find quick help, answers to frequently asked questions, and direct access to support.

Service Portal

Please use our product help search to find answers to your questions. Simply enter the article number or EAN to open the appropriate help page directly.

Service Portal

Sensor Form

In rare cases, a sensor may not work correctly. Using our form, you can quickly send your request to our service team and we will take care of a straightforward solution.

Sensor Form

Ratgeber & Tipps

FAQ - Frequently Asked Questions

The symbol flashes when the air pressure drops sharply within a short period of time. This indicates that a storm or strong winds are very likely approaching. As soon as the air pressure stabilizes, the flashing will stop automatically – it therefore serves as a storm warning.
Please proceed as follows:
  1. Remove all batteries from the base station and the outdoor sensor.
  2. Wait at least 3–10 minutes.
  3. Insert the batteries into the base station.
  4. Once the indoor temperature is displayed, insert the batteries into the outdoor sensor.
The signal should now be detected and the outdoor temperature displayed.

Tips:
  • If problems occur, replace all batteries with fresh, non-rechargeable brand batteries. Different battery types or charge levels may cause interference.
  • Do not place the base station near other electronic devices (this may interfere with reception).
  • If necessary, choose a different location for the base station.
If pressing the “DCF” button on the back does not help, reset the station:
  • Briefly press the reset button on the back with a pen
  • If necessary, place the station closer to a window, as reception inside buildings may be limited

Product and safety instructions


Manufacturer: 
Bresser GmbH, Gutenbergstraße 2, 46414 Rhede

Contact: 
www.bresser.de


Warning notes
  • WARNING! Do not swallow the battery, risk of chemical burns. This product contains a button cell/button battery. If swallowed, it can cause severe internal chemical burns within just 2 hours and may lead to death. If the battery compartment cannot be securely closed, do not use the product and keep it away from children.
  • If you believe batteries may have been swallowed or are in any body part, seek immediate medical attention. When disposing of this product, make sure it is collected separately if required.
  • The AC/DC adapter serves as a disconnecting device. - The devices AC/DC adapter should not be covered OR must be easily accessible during normal use. - To completely interrupt the power supply, the AC/DC adapter of the device must be disconnected from the network.
  • CAUTION - There is a risk of explosion if the battery is not replaced correctly. Replace only with the same or an equivalent type. The battery should not be exposed to extreme temperatures, low air pressure, or high altitudes during use, storage, or transport.
  • Replacing a battery with an incorrect type can lead to an explosion or leakage of flammable liquid or gas. Do not throw the battery into fire or a hot oven, or mechanically crush or cut it. This can lead to an explosion.
  • The presence of a battery in an environment with extremely high temperatures can cause an explosion or leakage of flammable liquids or gases. - A battery exposed to extremely low air pressure can explode, or there may be leakage of flammable liquids or gases.
Skip product gallery

Compatible Sensors

%
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER 7-in-1 Outdoor Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700330070033607003400700350070035107003600CM30007003600GYE0007003600QT50007004406908060070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Replacement wireless sensor, transmits data to the Wi-Fi Comfort weather centre Measures the outdoor temperature and outdoor humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Transmission range of up to 150 metres Place in an unobstructed location in order to obtain accurate sunlight and rain data Power supply: 3x AA batteries (not included) SCOPE OF DELIVERY Wireless sensor Mounting materials Base station is not included! Instruction manual

Available

£93.65* £93.99* (0.36% saved)
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.03* £122.99* (0.78% saved)
%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
Skip product gallery

Compatible Base Stations

BRESSER Additional / Replacement Base Station for Weather Station 7003300 from LOT No. 1605517 onwards
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002530 back on screen in no time with this base station. FEATURES7.4-inch colour display for detailed time and weather information LC display contrast adjustment for different viewing angles Wi-Fi connection for publishing data on weather platforms such as AWEKAS, Weather Underground and Weathercloud Indoor temperature (°C/°F) and humidity with comfort indicator Display of outdoor temperature (°C/°F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (min.) Wind speed display (gusts or average speed) Beaufort scale level (scale for classifying wind speed) Wind direction display (current and prevailing, based on 16 directions) Rainfall display (hourly, daily, weekly, monthly, total rainfall) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure display Feels-like outdoor temperature Weather index for dew point, wind chill factor and heat index Min./max. value memory (up to 24 hours) High/low value alarm with flashing symbol on the display Alarm clock with ice/frost warning Time (internet time synchronisation), date, weekday and moon phase Sunrise and sunset Weather data calibration 3 display brightness levels: High / Low / Off 7 languages for weekday (EN/ DE/ FR/ ES/ IT/ NL/ RU) Supports firmware updates Security type: supports WPA3 encryption Supports one 7-in-1 wireless professional sensor Supports up to 7 additional wireless sensors (7009999, SP60010000000, SM60020000000) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: mains adapter (included) and 3x AAA backup batteries (not included) Mounting: wall-mounted or stand SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Currently unavailable

£134.00*
NATIONAL GEOGRAPHIC Additional / Replacement Base Station for Weather Station 9080600
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES 5.7'' colour display for detailed time and weather information Wi-Fi connection with internet time synchronisation Receives weather data from the 7-in-1 professional sensor (not included) and from the wireless thermo-hygro sensor (not included) via 868 MHz Publish your local weather station data on platforms such as Weather Cloud Displays time, calendar, day of the week, and moon phase Alarm function Ice/frost warning Indoor temperature (°C / °F) and humidity with comfort indicator Outdoor temperature (°C / °F) and humidity display UV level and light intensity display Gust and average wind speed display Wind direction display (based on 16 compass points) Rainfall display (hourly, daily, weekly, monthly, total) Weather forecast (sunny, partly cloudy, cloudy, rainy, stormy, snowy) Air pressure Feels-like outdoor temperature Weather index including dew point, wind chill, and heat index Min./max. value memory (up to 24 hours) Alarm with LED indicator Weather calibration 3 display brightness levels: High / Low / Off 7 language options for the day of the week Supports firmware updates Security type: supports WPA3 encryption from firmware version 2.0 Supports a wireless 7-in-1 professional weather sensor (not included) Supports up to 7 additional wireless sensors (not included – item no.: 7009999) Easy setup and updates via WSLink app SCOPE OF DELIVERY Base station Power adapter No outdoor sensor included! Instruction manual

Available

£104.00*
%
BRESSER Additional / Spare Base Station for Weather Station 7002586
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Get clarity on the current wind and weather: You have purchased the BRESSER WiFi ClearView Weather Stationand now know your local wind speed, wind direction, humidity, temperature, precipitation values, as well as UV level and light intensity. But where should you put the base station? In the living room, your whole family will benefit from being able to glance quickly at the clear 21 cm TRUE BLACK colour display. But wouldn’t it also be great in the bedroom, so that as soon as you’ve switched off the alarm you’ll know whether blue sky and sunshine await? With this additional BRESSER base station, you don’t need to decide on just one room. Simply connect to your 7-in-1 external sensor and you have immediate access to your measured values in another room. You can count on the usual functions whenever you need them, including reliable local weather trend forecasts for the next 12 hours, displayed as graphics, so know when to organize a spontaneous BBQ. In the winter months, the frost alarm will alert you when the external temperature falls below -3 °C: Caution, risk of black ice! You can also see the date, day of the week, timeand moon phases so you have an idea of the ‘signs of the times’. Plus, for a more long-term view, the memory function stores historical measured data from the past 24 hours. Time to give your BRESSER WiFi ClearView Weather Station a breath of fresh air Are there early signs of mould formation in your bathroom? Is the air in your children’s bedroom too dry because of the central heating? The additional BRESSER base station allows you to respond to unusual situations like these with utmost flexibility, as two stations mean two separate measured results for indoor temperature, humidity and air pressure. Position the device in a critical location and the integrated sensor will measure the current room temperature, humidity and air pressure at that location. A graphical room climate indicator will alert you when the air is optimal, too dry or too damp. In addition, you can also set an independent maximum/minimum value alarm with audible and light signal on the additional station itself. On the road often? In addition to the base station at home, you can use the WiFi function to access your measured data through weather portals such as AWEKAS any time, anywhere. Or, use AWEKAS to transmit your data to your Smart Home controller. Risk more than just a glance— this BRESSER base station displays reliable weather data from your 7-in-1 external sensor at an additional location. FEATURES 8.3” colour display (19.3 x 9.3 cm) for detailed time and weather information WiFi connection with internet time synchronisation Receives weather data from the 7-in-1 external sensor and from the optional wireless thermo-hygro sensors on 868 MHz Suitable for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Integrated sensor for indoor temperature (°C/°F), humidity and air pressure External temperature (°C/°F), humidity, wind direction, wind speed, UV level and light intensity Precise wind direction display (16 directions) Graphical weather trend display (sunny, partly cloudy, overcast, rain, storm, snow) Beaufort index display (scale for measuring wind speed) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Room climate indicator Weather index display for dewpoint, windchill factor and heat index Time, calendar, day of the week and moon phase display Alarm function with snooze button Ice/frost alarm Min./max. memory (up to 24 hours) Alarm with LED indicator 3 different display brightness levels High/Low/Off 7 languages for days of the week Firmware updates supported Supports up to 7 additional wireless sensors (optional) (item no. 7009999) Integrated WiFi transmission to AWEKAS SCOPE OF DELIVERY Base station Power adapter External sensor not included! Instruction manual

Available

£150.41* £150.99* (0.38% saved)
BRESSER Additional / Spare Base Station for Weather Station 7003300 up to LOT No. 1599948
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Elegant and colourful: The additional base station allows you to view the data from your Wi-Fi comfort weather station in an additional room, such as a bedroom. The readings from your 7-in-1 outdoor sensor including outdoor temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity are transmitted wirelessly, giving your everything that you need to decide what to wear for the day. Built-in alarm The additionalbase station will help to give you a relaxing start to the day. It features a built-in alarm and a snooze button that silences the alarm to give you an extra few minutes in bed. The clock is synchronized automatically via the Internet to ensure that you won't be late to work. The modern LCD colour display can be viewed from any angle and shows you all relevant weather data including a weather forecast to help you decide what to wear for the day. The additional base station also displays a range of other useful data, including the perceived temperature, sunburn time, Beaufort level and historical data. Smart function for icy weather: Thanks to the built-in frost alarm, the alarm goes off 30 minutes earlier when the outdoor temperature drops below -3 °C. Create the perfect indoor climate with the additional base station In addition to the outdoor conditions such as rain, wind and sunshine, the indoor climate can have a big impact on our health and wellbeing. The base station features a built-in sensor that measures the room humidity and temperature and stores the maximum and minimum values. This helps you to take action to prevent excessively dry air in winter and stop mould from forming in rooms with a high humidity, such as the kitchen. An optimal indoor climate is indicated by a smiley face on the graphical comfort indicator. If the display shows a frowning smiley, this indicates that you need to take action to improve the indoor climate. Get a better overview of the weather and your indoor climate with the additional base station for your Wi-Fi Comfort Weather Station. BASE STATION FEATURES 7.4-inch colour display with detailed time and weather information LCD display with adjustable contrast for multiple viewing angles Wi-Fi connection for publication of data on platforms such as AWEKAS, Weather Underground and Weather Cloud Indoor temperature (°C/°F) and humidity with comfort indicator Displays the outdoor temperature (°C/ °F) and humidity UV index with UV level indicator Light intensity display Sunburn time display (in mins) Wind speed display (gusts or average wind speed) Beaufort scale display (scale for classifying the wind speed) Wind direction display (current and predominant, 16 directions) Precipitation quantity display (hourly, daily, weekly, monthly, total precipitation) Weather forecast (sunny, partly cloudy, overcast, rain, storm, snow) Atmospheric pressure display Perceived outdoor temperature Weather index for dewpoint, windchill factor and heat index Min./max. memory (up to 24 hours) High/low alarm with flashing symbol on the display Alarm with ice/frost warning Time (synced via the Internet), date, day of the week and moon phase Sunrise and sunset Weather data calibration 3 different display brightness levels High/Low/Off 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports 7-in-1 wireless sensor (not included) Supports up to 7 additional wireless sensors (not included) Dimensions: 202 x 138 x 38 mm / Weight: 510 g Power supply: Power adapter (included) and 3x AAA backup batteries (not included) Installation: Wall or stand DELIVERY CONTENT Base station Power adapter External sensor not included! Instruction manual

Available

£134.00*
Skip product gallery

Spare Parts

Grey Wind Vane
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:1519915200152011650970025107002511700251270025137002520CM300070025257002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT5000700440678025207802580780315078033009080500908060096025107002520000000700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

£15.99*
Black Wind Cups
This high-quality spare part will quickly get your weather station working again.IMPORTANT: Is this part compatible with your weather station?This spare part is only compatible with the following devices:15199152001520116268165097002510700251170025127002513700252570025317002550CM30007002550GYE0007002550MGU0007002550QT50007002571700258070025817002582700258570025867002590700261070026207003100CM30007003100GYE0007003100HZI0007003100QT50007003150700330070034007003600CM30007003600GYE0007003600QT500070044067802520780258078031507803300908050090806009602510700255000000070031000000007003600000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000

Available

£15.99*
Skip product gallery

Customers also bought

%
BRESSER Soil Temperature and Moisture Meter
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15196151971519815199152011543915440156591566016479700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This additional sensor allows you to take two additional practical measurements with your BRESSER weather station. In addition to the soil temperature, the sensor can also measure the soil moisture – ideal for plant lovers and gardeners. Measurements are sent to the base station at 60 second intervals. The soil moisture meter can be positioned up to 150 metres away from the base station. There are also 7 different channels to choose from. And thanks to the weatherproof housing, the wireless sensor is able to withstand adverse weather conditions. FEATURES Wireless and compact soil sensor Measures the soil humidity Measures the soil temperature Transmission interval: 60 seconds Extra-long range of up to 150 metres Cable length: approx. 140 cm 7 available channels LED indicator for data transmission Weatherproof housing Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Soil sensor Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Thermo-Hygro Sensor 7 Channel 868 MHz
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1565970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Remote sensor for measuring of temperature and humidity. Seven channels settable. With extra long radio range of 150 meters on a radio frequency of 868 MHz. Good news for smart home owners: this sensor can be seamlessly integrated into the leading smart home system when paired with a compatible Tuya-enabled weather station. FEATURES Temperature measuring Humidity measuring 7 channels settable RC frequency: 868 MHz Extra long radio range of 150 meters! Suitable for smarthome systems by Tuya Powered by battery; 2x AA (LR6) (not included!) SCOPE OF DELIVERY Remote sensor

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Spa and Pool thermometer
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.151961519715198151991520115439154401565915660164797002531700254170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 Want to cool off in your pool? This wireless and floating pool thermometer from BRESSER will tell you whether the water is at an optimal temperature. Measurements are shown on the built-in LCD display. You can also connect the pool thermometer to your BRESSER weather centre so that you can check the pool temperature from the comfort of your own home. FEATURES Floating pool sensor for measuring the water temperature LCD display for displaying the temperature (°C/°F) Wireless frequency: 868 MHz Wireless transmission range of up to 30 m to optional base station 7 available channels Waterproof (IPX7) Powered by 2x AA batteries (not included) DELIVERY CONTENT Pool thermometer Instruction manual

Available

£36.89* £36.99* (0.27% saved)
%
BRESSER Precision Thermo-Hygro Sensor
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.1519615197151981519915201154391544015659156601647970025317002541700257170025807002581700258270025857002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700315070032007003210700322070032307003240700330070034007003500700351070035207003600CM30007003600GYE0007003600QT50007003700700380070039007004406700630090806009080700908080070031000000007003600000000WSH4102WSX1001CM3LC1WSX1001CM3LC2WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX1001000000WSX3001000000 This high-performance outdoor temperature and humidity sensor is the perfect extension for your BRESSER weather station. The sensor transmits measurement data over an ultra-long wireless range of to 150 metres at a frequency of 868 MHz. There are seven different wireless channels available to choose from. Thanks to the built-in display, you can also use the precision thermo-hygro sensor as a standalone solution without a weather centre. FEATURES Temperature measurement function Humidity measurement function 7 available channels Built-in display, can also be used as a standalone solution without a weather centre Temperature range: -20 ~ 60℃ Wireless frequency: 868 MHz Ultra-long range of up to 150 m Battery-operated with 2x AA batteries (not included) DELIVERY CONTENT Outdoor sensor Instruction manual

Available

£33.06* £33.99* (2.74% saved)
%
BRESSER Additional / Spare Base Station for Weather Station 7003100CM3000/700100GYE000/7003100HZI000
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.7002582700258670026207003100CM30007003100GYE0007003100HZI0007003100QT500070033007003600CM30007003600GYE0007003600QT5000908060070031000000007003600000000 Fancy sharing your personally recorded weather data with your neighbours? Or do you need a replacement base station because yours didn’t quite survive the last house move – or the children’s enthusiastic games of tag? Whether you’re upgrading your setup or replacing a unit, this base station brings all the features of your existing weather station straight back to your screen in no time.FEATURES Receives weather data from 7-in-1 outdoor sensor for ClimateScout Weather Station via 868 MHz RF transmission frequency Clear, professional display with time and comprehensive weather information Integrated sensor for indoor temperature (°C/°F), humidity and air pressure with air pressure trend (24 hours) Room climate indicator Maximum and minimum value alarm Automatic cycle mode displays the different channels from additional sensors (not included) in 4-second intervals DCF time synchronisation (Central European Time, time delay can be set for use in other time zones), automatically switches between winter and summer time Alarm with snooze function and frost warning Time, calendar, day of the week and moon phase display Min./max. memory (up to 24 hours) Backlight Displays the graphical weather trend (12 hours) Displays the outdoor temperature (°C/°F), humidity, air pressure, UV index and light intensity (Klux, Kfc, W/m2) Displays the Beaufort index (scale for measuring wind speed) Displays rainfall data: hourly, daily, weekly, monthly, total precipitation (in/mm) - with indicator Weather index display for dewpoint, windchill factor and heat index Displays day of the week and wind direction in 5 languages EN/DE/FR/ES/IT) Can be wall-mounted or placed on desktop Base station dimensions: 180 x 135 x 22 mm (W x H x D) Display size: 125 x 77 mm (W x H) Power supply: 4x AA (not included) DELIVERY CONTENT Additional base station External sensor not included! Instruction manual

Available

From £61.49*
Skip product gallery

Customers also viewed

BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise
With the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise, you’ll never be caught out by the weather. This sleek Wi-Fi weather station brings all the essentials - from climate to time data - together on a crisp 7.4-inch (18.8 cm) display. And when the mercury rises, the WBGT with heat stress level helps you keep your cool. Thanks to Wi-Fi connectivity, your data is always at hand - whether you’re out and about or taking it easy on the sofa. Your garden, your weather report Why rely on forecasts from miles away when your own outdoor sensor tells the full story? This weather station with outdoor sensor collects temperature, humidity, wind speed, wind direction, rainfall, UV level, light intensity and WBGT straight from your surroundings. With a 150 m range and a weatherproof housing, it’s easy to find the perfect spot for this powerful all-rounder. WBGT - a hot topic worth watching When the heat is on, your body needs extra care. That’s why the WBGT reading (Wet Bulb Globe Temperature) is so valuable. This digital weather station combines air temperature, mean radiant temperature and wet-bulb temperature to show how effectively your body can cool itself. If this last value stays above 35 °C for too long, it’s time to slow down. Whether you’re exercising, gardening or enjoying the outdoors, this professional weather station gives you round-the-clock WBGT values. The heat stress index also lets you know intuitively when to take it easy. Keep the indoors in check too This isn’t just about the great outdoors - the home weather station also keeps tabs on your indoor climate. The built-in thermometer monitors room temperature, the hygrometer measures humidity, and the comfort indicator gives you an instant smiley-face check on your air quality. Meanwhile, the integrated barometer tracks air pressure, warning you when a change in the weather is brewing. All the extras you’d expect from a pro This garden weather station doesn’t stop at the basics. Alongside exact measurements and a graphical forecast, it shows useful values such as feels-like temperature, heat index, dew point and wind chill. The Beaufort scale reveals just how breezy it will feel outdoors, while the max./min. memory tracks trends over time. Customisable high/low alarms alert you to conditions that matter most. And here’s a clever winter perk: when the temperature outside dips below -3°C, the alarm wakes you 30 minutes early so you can take your time on frosty mornings. Meet your all-in-one weather expert - the BRESSER 8-in-1 Wi-Fi Professional Home Weather Station Bise. FEATURES BASE STATION Wi-Fi connection for sharing local weather data on Weathercloud Displays readings from the 8-in-1 solar outdoor sensor (outdoor temperature, humidity, wind speed/direction, rainfall, UV level, light intensity, WBGT) Graphical weather forecast Air pressure Indoor temperature and humidity with comfort indicator Heat stress index Beaufort scale (wind force classification) Weather index (feels-like temperature, heat index, dew point, wind chill) Max./min. memory High/low alarms Automatic time, date and moon phase via internet sync Alarm clock with frost alert WSLink app for easy Wi-Fi setup, data calibration and firmware updates Supports up to 6 additional optional thermo-hygro sensors (not included, see BRESSER accessories) Power supply: USB cable with mains adapter (included), CR2032 backup battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES SENSOR Measures temperature, humidity, wind speed/direction, rainfall, UV level, light intensity and WBGT Weatherproof housing Range up to 150 m Powered by 3 x AA batteries (not included) SCOPE OF DELIVERY Base station with mains adapter 8-in-1 outdoor sensor Instruction manual

Available

£179.00*
%
BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station
Perfect for passionate weather enthusiasts: The BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station offers everything a hobby meteorologist's heart desires with various display modes, a sophisticated multi-sensor with 9 different sensors, and comprehensive data storage with export options. Additionally, the extensive weather forecast, the heat stress index, and the air quality data make it easy to plan your outdoor activities while keeping health in mind. And thanks to the Wi-Fi connection, you always have your own measurements on the go on your mobile device. Weather station perfectly presenting extensive measurement data How strong will the wind blow in my face shortly? With the wireless weather station, you can answer this and other meteorological questions in no time. The partially solar-powered multi-sensor measures all relevant weather parameters from temperature to air pressure with precision. Trend graphs, data log, channel overview or max/min value display – enjoy numerous possibilities to evaluate the data at a glance on the screen. A CSV export to your PC can also be done in no time. Detailed weather forecast for long-term planning Do you want to know if your weekend trip will be ruined by rain? With the MeteoChamp, you will have a comprehensive weather forecast on your screen in no time. Find out what to expect hourly for the next 24 hours or daily for the next 14 days in terms of climate. The temperature and precipitation probability forecast helps you with your planning. Carefree summer fun – with the heat stress index When the weather is nice, many head outdoors. But when the sun is too strong, we need to take care of our health during strenuous activities. This is where the heat stress index comes into play, calculated by the weather station. It is based on the Wet Bulb Globe Temperature, which considers the key heat factors in the environment. The four warning levels help you stay safe and healthy on hot days. Breathe easy – with the air quality display How clean is the air you breathe? The local AQI (Air Quality Index) shows you directly whether the air in your surroundings is clean. Also, current data on pollutant exposure from PM2.5, PM10, NO2, SO2, O3, and CO from the internet are available at the press of a button. For data measured directly on-site, you can expand your weather station with optional CO2 sensors (not included), in addition to optional thermo-hygro sensors (not included) or water detectors (not included). Keep an eye on the climate with the help of a versatile weather expert: the BRESSER 9-in-1 MeteoChamp HD WiFi Weather Station. FEATURES BASE STATION Weather station with HD display for various display modes Display of the exact measurement data from the 9-in-1 outdoor sensor (outdoor temperature, outdoor humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, WBGT, air pressure) Heat stress index based on WBGT Weather forecast (14 days / 24 hours) including temperature and precipitation probability WiFi connection for sharing and retrieving local data on platforms like ProWeatherLive (3 years membership included), WeatherUnderground, and Weathercloud Indoor temperature (°C/°F) and humidity Display of internet data on local AQI value (Air Quality Index) and the 6 most important pollutants (PM2.5, PM10, NO2, SO2, O3, CO) Multi-channel overviews of live data from all wireless sensors Felt outdoor temperature and dew point Max/min value memory with timestamp Trend graphs over 72 hours for all sensors Data storage with export function High/low value alarm for various measurements Weather data calibration Alarm clock with frost warning Time and date (internet time synchronisation) Moon phase, sunrise/sunset, moonrise/moonset Expandable with the following optional sensors: Up to 7x thermo-hygro, ground, and/or pool sensors (not included) Up to 7x water detectors (not included) 1x PM2.5/10 sensor (not included) 1x CO2 sensor (not included) 1x HCHO and VOC sensor (not included) 1x lightning sensor (not included) Various backgrounds adjustable Power supply: Power plug (included), CR2032 back-up battery (not included) Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES MULTISENSOR Measures temperature, humidity, wind speed, wind direction, precipitation amount, UV level, light intensity, air pressure, WBGT Operates via a large movable solar panel If there is insufficient sunlight, operates on 3x AA batteries (not included) Waterproof housing High range up to 150 m SCOPE OF DELIVERY Base station including power plug 9-in-1 outdoor sensor Manual

Available

£369.00* £399.00* (7.52% saved)
%
BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station
The ultimate smart weather solution: the BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station allows you to integrate weather data into your smart home system. It supports IoT (Internet of Things) technology, the foundation of smart home systems. The smart weather station is the perfect addition to all smart home systems powered by Tuya, the world-leading IoT platform. Based on measurements for temperature, humidity, air pressure, wind speed, wind direction, precipitation, UV level and light intensity, it controls other Tuya-enabled devices in your home - completely automatically and according to your preferences. The weather station also features a rain gauge, which can be used to control your garden sprinkler. When it gets dark, the light sensor switches on the lights for you, while the thermometer can be set to turn up the heating on cold winter evenings. The possibilities are endless! Weather station with app - make the most of your local measurement data Access weather readings from your 7-in-1 outdoor sensor anytime, anywhere and create rules for your smart home in a flash: All you need is the Tuya Life app. Then simply add your smart weather station to the app via Wi-Fi and enjoy the full range of functions. You can also set a high/low alarm in the app interface to receive warnings when measurements reach a critical threshold, e.g. to receive notifications about the indoor climate so that you can take action against mildew. If you're a passionate hobby meteorologist, you're probably keen to keep up to date with the latest weather trends. The weather station allows you to view daily, monthly and annual graphics and load historical data into the app. PLEASE NOTE: This device only connects to the internet on the 2.4 GHz Wi-Fi frequency. Most routers establish the correct connection automatically. If this is not the case, you can usually make a manual adjustment.  If you're not sure what to wear, simply take a look at the clear, attractive colour display on the base station to find out what the weather is doing. You can also use voice commands to ask about the weather, as the weather station is compatible with Alexa. In just a few simple steps, the weather station can be connected to Alexa. And then you can easily control the smart weather station by voice command: Alexa, what is the temperature from the weather station? Alexa, what is the temperature of the temperature and humidity sensor? The answer always follows reliably and quickly. If, on the other hand, you prefer to communicate with Google Assistant, you can simply use that to get the desired information about the weather situation. The source of this information are always your very own local readings. The ultimate smart weather station Designed for smart homes, this weather station comes with the very latest technology. The base station displays the time, date and day of the week, which are synchronized over the Internet. It also features an integrated alarm clock with a snooze function, which is guaranteed to ensure that your day starts on time. After getting up, you can take a look at the weather forecast and the weather index with the perceived outside temperature and heat index, and then decide what to wear for the day ahead. Make your life easier - with the BRESSER 7-in-1 ClimateConnect Tuya Smart Home Weather Station. Sounds convincing, but need more smart options for your home? Then expand the smart weather station with up to 3 additional, optional sensors, e.g. a pool thermometer, a thermo/hygro sensor or a soil thermometer (see accessories).BASE STATION FEATURES Smart weather station for Tuya smart homes Operated via Tuya Life app Can control other Tuya-compatible IoT devices Adjustable high/low alarm in app interface View daily, monthly and annual graphs in app interface Historical data can be downloaded from app interface Access to data via Alexa and Google Assistant Colour display shows the time and weather information Displays precise measurement data from the 7-in-1 outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Indoor temperature (°C/°F) and humidity Weather forecast Air pressure Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Weather data calibration Max/min weather data memory Synchronises the local time and date via the Internet Alarm function with snooze button Automatic dimming function for the backlight Automatic mode for the channel display 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports up to 3 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Power adapter (included) and back-up battery (not included) Dimensions: 130 x 111 x 26 mm / Weight: 214 g Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Range: Up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 343.5 x 393.5 x 136 mm / Weight: 757 g DELIVERY CONTENT Base station 7-in-1 wireless sensor Power adapter Instruction manual
Colour

Available

From £150.41* £169.99* (11.52% saved)
BRESSER Additional / Replacement Base Station for Weather Station 7002511 from LOT no. 1199241
NOTE: This base station is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station. WARNING! One or more of the listed weather stations have a lot number restriction, so please also check the lot number of your device.15200152017002510 (from lot number 1181632)7002511 (from lot number 1199241)7002512 (from lot number 1233002)700251370025257002550CM30007002550GYE0007002550MGU0007002550QT500070025717002580700258170025857002590908050096025107002550000000WSX1001CM3LC1WSX1001CM3LC2WSX1001000000 Want to share your weather data with your immediate neighbours? Or do you need a replacement base station because your device didn’t survive the last house move or a wild game of tag with the kids? Whether as an extension or a spare part – get all the functions of your existing weather station with item number 7002511 back on screen in no time with this base station. Smart extension for early risers: the additional base station In the living room, the whole family keeps an eye on weather conditions and ambient climate with the weather station. But because the device really shows its strengths at the start of the day, it’s worth having an extra console in the bedroom. That way, you’ll start every morning on time and dressed for the weather. Whether as a replacement or an add-on – enjoy all the functions of your existing weather station with this compatible base station. FEATURES Displays readings from a compatible 5-in-1 multi outdoor sensor Indoor temperature (°C/°F) and humidity Outdoor temperature (°C/°F) and humidity display Wind direction and speed display Graphical 12-hour weather trend display Beaufort scale (classification of wind speeds) Displays Precipitation amount with history (day/week/month) Air pressure with 24-hour history Heat index Dew point Radio-controlled time and date setting Moon phases Alarm function Ice/frost warning Min./max. value memory (up to 24 hours) Amber LED backlight SCOPE OF DELIVERY Base station No outdoor sensor included! Instruction manual

Available

£64.00*
%
BRESSER RC Weather Station Neomeo V silver
Compact weather knowledge: The BRESSER Neomeo V Wireless Weather Station in stylish silver brings all the essential information about indoor and outdoor climates directly into your home. With reliable data and versatile features, you'll be prepared for the day no matter the weather. Comprehensive forecasts on your home weather station Will it be sunny or rainy today and tomorrow? The graphical weather forecasts for the next 24 and 48 hours provide the answer at a glance, helping you plan your activities with confidence. Always in control of temperature and humidity with the wireless weather station Wondering if you need to dress warmly for your walk? The temperature and humidity display on the Neomeo V has the answer. You can also monitor your indoor comfort. The room climate comfort indicator will tell you when it's time to ventilate or heat, and regular checking of the max./min. values helps prevent mould. Wireless weather station with practical temperature warning functions Want to protect your balcony roses from frost? Activate the frost warning, and a symbol will appear when the temperature is between -1 and 2.9 °C. Need more flexibility? The temperature alarm for the outdoor sensor allows you to set your own temperature limits. Easily placed and read on-site: the outdoor sensor Whether in the garden, on the balcony, or even in the front yard – the wireless sensor offers maximum flexibility with a range of up to 80 m. The integrated display shows the current temperature and humidity directly on site, so it can even be used independently of the base station. Get a complete overview of weather and indoor climate now – with the BRESSER Neomeo V Wireless Weather Station. FEATURES OF THE BASE STATION Weather station with coloured display Indoor temperature and humidity (°C/°F) Display of outdoor temperature and humidity (°C/°F) Graphical weather forecast for the next 24 and 48 hours Room climate comfort indicator Temperature alarm for the outdoor sensor Frost warning on the display Display of 24-hour max./min. temperature and humidity Automatic time and date setting (DCF) Integrated alarm clock with snooze function Power supply: power adapter (included) and 1x CR2032 backup battery (included)  FEATURES OF THE SENSOR Measurement of temperature and humidity Clear LCD display Range: up to 80 m IP protection class: IP44 (splash-proof) Dimensions: 71 x 65 x 23 mm / Weight: 44 g Battery-operated: 2x AAA batteries (not included) SCOPE OF DELIVERY Base station with power adapter 1x wireless sensor User manual

Available

£22.10* £26.09* (15.29% saved)
BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast
Stay on top of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! The weather station displays a 6-day weather forecast with maximum/minimum temperature readings, and also tells you the chance of rain. It also features a 10-inch display, which ensures that all the weather stats are easy to read. The modern Wi-Fi weather station with a solar-powered sensor obtains the forecast data via the Internet from the ProWeatherLive platform. In addition to the weather forecast, the weather station also displays the local visibility and cloud cover. Eco-friendly weather station with solar-powered sensor, ideal for amateur meteorologists The weather station comes with a solar-powered outdoor sensor, which is powered by solar energy and measures temperature, humidity, wind speed, wind direction, precipitation, UV level and light intensity. Simply align the large solar panel with the sun according to your location. The measuring device needs about 4 hours of direct sunlight (100,000 lux) a day. There isn’t much sun around? Simply insert 3 AA batteries (not included) as a back-up during installation, and they will take care of the power supply. All the measurements will appear on the screen of the base station, which can be located up to 150 metres away. Wi-Fi weather station with feature-packed base station The base station of the 6-day 4CAST PRO SF weather station features a stylish design and displays the data received from the solar-powered sensor. It also takes its own readings via the built-in thermo/hygro sensor, which measures the ambient indoor temperature, humidity and air pressure. Together with the maximum/minimum memory, this enables you to keep an eye on the indoor climate and effectively prevent mildew and excessively dry air. Outdoor temperature, precipitation and more – you can also view the maximum/minimum readings for the other measurements made by the solar-powered sensor. Share weather data and use it with your smart home Access the measurements from your solar-powered sensor remotely and share them with others: with a few clicks, you can send your weather station data to the ProWeatherLive platform. If you have a smart home, you can also make use of the German-language portal AWEKAS, which allows you to transfer measurement data from the solar-powered sensor to your smart home system free of charge. Simply follow the link below to set up the weather station for your smart home system: https://www.awekas.at/for2/index.php?thread/17080-software-api-stations-api-beschreibung-beta/ Never lose track of time In addition to its elegant, contemporary design, the 4CAST PRO SF Wi-Fi weather station allows you to keep track of the time, date, day of the week and moon phase via the large display. For people who enjoy watching the sunset or observing the moon, the weather station also displays the sunrise/moonrise and sunset/moonset times.  Solar-powered weather data: Stay informed of the weather with the BRESSER 7-in-1 WiFi Weather Station 4CAST with 6-Day Forecast! BASE STATION FEATURES 6-day weather forecast (today and 5 following days) Large 10” display with stylish design Wi-Fi connection for sharing local weather data on platforms such as ProWeatherLive, AWEKAS, Weather Underground or WeatherCloud Forecast for maximum and minimum temperature and chance of rainfall via the ProWeatherLive server Local visibility and cloud cover via ProWeatherLive server Indoor temperature (°C/°F) and humidity Displays precise measurement data from the 7-in-1 solar outdoor sensor (Outdoor temperature and humidity, wind speed, wind direction, precipitation, UV level, light intensity) Weather index (perceived outdoor temperature, dewpoint, windchill factor and heat index) Gusts and average wind speed Beaufort index (scale for measuring wind speed) Sunburn time (in mins) Air pressure Weather data calibration Weather alarm function via ProWeatherLive server Maximum/minimum value memory (daily/total) Backlight with automatic dimming function Displays the time, date, day of the week and moon phase Sun/moonrise, sun/moonset 7 languages for days of the week (EN, DE, FR, ES, IT, NL, RU) Supports firmware updates Supports up to 7 additional sensors (not included, see accessories) Mounting options: Can be placed on tabletop with built-in stand or wall-mounted Power supply: Mains plug (included), CR2032 back-up battery (not included) Dimensions: 219 x 200 x 26 mm Good to know: The sensor pairs with multiple base stations at once – perfect if you want to keep an eye on conditions in different rooms. FEATURES OF 7-IN-1 OUTDOOR SENSOR Powered via a large movable solar panel In case of insufficient sunlight operation via 3x AA batteries (not included) Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensityRange: up to 150 m Dimensions: 390 x 174 x 465 mm DELIVERY CONTENT Base station Solar-powered outdoor sensor Power adapter Instruction manual

Available

£190.53*
%
BRESSER 7-in-1 Outdoor Sensor with Solar-Assisted Battery Operation
NOTE: This sensor is compatible with weather stations with the following item numbers. You can find the item number of your weather station printed on the back of the base station.15197151981519915660700254170025827002586700261070026207003100CM30007003100GYE0007003100HZI0007003100QT5000700320070032107003220700323070032407003300700335070033607003400700350070035107003600CM30007003600GYE0007003600QT500070037007003800700390070044069080600908070070031000000007003600000000WSX3001WSX3001CM3LC1WSX3001CM3LC2WSX3001000000 This high-quality replacement part will quickly get your weather station back in working order. FEATURES Measures the temperature and humidity Measures the wind speed, wind direction and rainfall Measures the UV level and light intensity Solar power for longer battery lifespan Range: up to 150 m Power supply: 3x AA batteries (not included) Dimensions: 420 x 170 x 213 mm SCOPE OF DELIVERY Wireless sensor with installation material Base station not included! Instruction manual

Available

£122.03* £122.99* (0.78% saved)