BRESSER 10mm Plössl eyepiece 31,7mm/1,25"

With the usage of barlow lenses, you can extend the equivalent focal length of telescopes and hence increase the magnification of your observed targets. Subsequently, you can use lower power eyepieces in Barlows to act as much more powerful eyepieces, but retain the larger ocular size and more comfortable viewing that comes with lower power eyepiece designs.Due to their two lens design, these Barlow lenses provide a brilliant image quality for the whole visual field and are suitable for observations and photography.  The black coloured Barlow element cell in this BRESSER Barlow Lens 2x 31.8mm/1.25," can be unscrewed and has the same thread as 1.25" filters, allowing it to be mounted in 1.25" eyepieces, t-adapters and other accessories, giving you flexibility of use and the ability to vary magnification in different accessories.  For instance, the black Barlow cell screwed into the average length nosepiece of a standard push fit t-adapter will give around 1.6x magnification on an attached DSLR.  This can be very useful when trying to get to photographic focus with some Newtonians and Solar Telescopes, which lack the necessary amount of in focus travel to get a camera to a prime focus position.FEATURESsuitable for observations and photographydoubling of the focal lengthtwo lens designfully multi-coatedWHAT'S INCLUDEDBarlow lens (1pc)

BRESSER 40mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 40 mm Field of view: 46° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

BRESSER 15mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 15 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

BRESSER 5mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 5 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Each dew shield threads into the front lens cell and effectively inhibits the formation of dew on the lens surface in humid/cool observation conditions. Reduces reflections caused by scattered light incident from the side. Protects the front lens from accidental contact and scratches. FEATURES Prevents fogging of the front lens Reduces reflections caused by stray light Protects the front lens of the telescope Use in humid/cool conditions Suitable for BRESSER MCX127/MC127 telescopes Easy to screw into the telescopic tube Length: 120mm , weight: 160g SCOPE OF DELIVERY Dew cap, 1 piece

NEW - now including a high-quality aperture Solar-filter for safe observation of sunspots, eclipses and planet transits. Great telescope for night and solar observation.The MESSIER MCX-127 telescope is your own small observatory with GoTo computer control. Easy to operate, easy to transport and universally use.  Observe moon, planets, galaxies and nebulae through the proven BRESSER Maksutov-Cassegrain optics. The main features of this optics are a sharp and high-contrast image, as well as the very compact and sealed tube design. An all-round telescope for all fast spotting lovers ! Goto systems play an important role in the world of amateur astronomy as they ensure that users spend less time searching for celestrial objects and more time observing and photographing. The BRESSER Messier GoTo control, allows you to operate your telescope with the included computer handbox. After entering the basic data such as date, time and location, at least 1 known reference star is approached and confirmed. Afterwards, you can choose your favourite objects from the integrated database and let the MCX telescope move to and track them automatically. It couldn't be simpler! One of the outstanding features of the MCX telescopes is the very solid fork mount made of die-cast aluminium and the universal field tripod made of stainless steel. Both guarantee a safe stand and as little unwanted vibrations as possible during observation. In addition, the drives in both axes are equipped with precision ball bearings and precision worm gears made of steel and brass. This ensures smooth and quiet star tracking. Adapt your smartphone camera directly behind the SPL26mm eyepiece using the included smartphone holder or mount your camera on the M35 threaded connector and take astro photos of the moon and planets. The 90° flip mirror at the back of the telescope allows a quick and comfortable change between using an eyepiece or a camera.  You'll be amazed at what this MCX telescope can do with little effort.When it comes to tracking the stars with a telescope or camera, there is nothing comparable to the precision of a German equatorial or parallactic mount. It is important to follow the objects as precise as possible when they rise in the east and sink in the west. For observers it is very easy to keep their celestial object in the middle of the eyepiece for a longer time with a German equatorial/parallactic mount. This possibility of setup  (EQ mode) is already included in your new MCX telescope. The so-called polar wedge on the tripod head can be tilted accordingly and adjusted to the latitude of your location. You can therefore quickly switch between these two types of installation (AZ/EQ) - without having to buy extra accessories! Also a fast use of the MCX telescope without tripod only as a table device is possible !  This telescope combines so many good characteristics that the purchase is really worthwhile. You will be inspired! FEATURES Universal and compact entry-level telescope with GoTo function Easy operation and transport High-resolution and proven BRESSER Maksutov-Cassegrain optics Aperture diameter: 127mm , focal length 1900mm FMC fully coated optics for a brighter image Solid die-cast aluminium fork mounting with drive motors in both axes Proven Goto control for navigation in the starry sky Computer hand box with very large and illuminated display Multilingual menu navigation in DE, GB, FR, ES, IT Sturdy stainless steel tripod with polar wedge (AZ+EQ mode possible) Can also be used without a tripod as a table-top unit Flip mirror 90° - quick change between eyepiece and camera possible Battery compartment integrated in the base for 8 x AA batteries (Batt. not included) Integrated circular bubble for easy leveling Enlarged primary mirror (138mm) for a brighter image Precise worm gears made of steel/brass in both axes Manual gear clamps in both axes Smartphone holder included for photography through the telescope LED red dot finder with CR-2032 battery included BRESSER Super Plössl eyepiece 26mm (1.25") included (73x) Eyepiece shaft diameter: 31.7mm (1.25") Camera connection thread: M35 x 1 mm External connection for 12 Volt power supply: Yes Adjustable working height on tripod: 110 - 160cm Recommended magnifications: 36x - 204x Telescope for night and solar observationSCOPE OF DELIVERY Optical MCX Tube in Fork Mount GoTo Computer Handbox with Hand Strap Field tripod with polar wedge AZ/EQ Smartphone holder for photography through the telescope BRESSER Super Plössl eyepiece 26mm (1.25") LED red dot finderAperture solar-filterObjective dust capInstruction manual 

BRESSER 30mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 30 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack

Who doesn't dream of exploring the beauties of the universe with their own eyes? This complete telescope set allows you to make your first celestial observations immediately and very easily. It contains everything you need for your new hobby: a reflector telescope with 130 mm aperture and 650 mm focal length, an equatorial mount, a tripod and extensive accessories for astronomical observations. The system is easy to operate and very flexible. You can look forward to fascinating views of the Moon and planets. Star clusters and gas nebulae also look impressive through the user-friendly entry-level telescope. Easy start with the astronomy all-rounder – the telescope The set includes a true classic among the reflector telescopes, a so-called Newtonian reflector. With this type of telescope, you look in at the front of the tube instead of at the back. The advantage: the observing position always remains comfortable, even when the telescope is pointed vertically upwards. In addition to observing comfort, reflectors also impress with their optical performance. After all, they are absolutely free of chromatic aberrations and thus offer good imaging properties. Due to its 130 mm aperture, the entry-level telescope already collects a lot of light from the celestial objects. In addition, there is the short focal ratio (ratio of the aperture to the focal length) of 1 to 5 (F/5), which derives from the 130 mm aperture and the 650 mm focal length. As a result, the fast beginner's telescope shows a bright image and enables high magnifications. You also benefit from the flexibility of this astronomical telescope: Admire the fascinating view of open and globular clusters such as M13 in the constellation Hercules at low to medium magnification. Or marvel at gas nebulae such as the famous Orion Nebula M42. At high magnifications, on the other hand, the entry-level telescope brings you closer to the impressive planets and exciting details on our Moon. How big do the astronomical eye-catchers appear? Due to the resolving power achieved with the aperture of 130 mm, the telescope shows you sharp images at magnifications up to about 260x. With the included accessories, you can already reach 195x. The technology allows even more, but the image sharpness can decrease at even higher magnifications. However, it is not only the telescope that determines how much you can magnify. It also depends on the air turbulence in the atmosphere (seeing conditions). Note for nature lovers: If you choose a Newtonian telescope like the Pegasus reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes. User-friendly base – mount and tripod Found the perfect place for your celestial observations? Then you can start installing your astronomical telescope on the height-adjustable stainless steel tripod with equatorial mount. The advantage over azimuthal mounts: you only have to move along one axis instead of two. The reason is that you align the other one parallel to the earth's axis beforehand. This so-called "alignment" is very easy: you simply point the axis approximately at Polaris. In addition, the mount comes equipped with two flexible shafts with fine adjustment. Perfect for aligning and tracking the telescope particularly precisely and comfortably. Everything always within reach: on the practical storage plate, your accessories are quickly at hand if needed.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable! Complete astro package to start stargazing immediately – the accessories The comprehensive astronomy accessories make it easier for you to get started and enable you to see your favourite celestial bodies from completely different perspectives. To align the telescope and find your way around the night sky you can mount the LED finder parallel to the telescope. The method is simple: a red dot is projected onto a small ground-glass screen inside the viewfinder. When you look through the dot appears to hover in front of the sky – exactly at the point where the entry-level telescope is pointed. This way, you can easily find astronomical objects through the illuminated dot finder and then marvel at them in detail using the high magnification of your telescope. Vary your view of the stars: with the two eyepieces (10 mm and 25 mm), you can admire your nocturnal observation objects in two different magnifications. They are simply inserted into the eyepiece focuser of the telescope via their 1.25-inch-sockets, which is a standard diameter. You want to look even closer? Then the included 3x barlow lens can triple the magnification of the eyepieces. Explore the night sky on your own through the versatile BRESSER Pegasus 130/650 EQ3 reflector telescope. FEATURES Reflector telescope for beginners with 130 mm aperture and 650 mm focal length Reflector type: Newton Good for observing Moon, planets as well as star clusters and gas nebulae Height-adjustable tripod with equatorial EQ3 mount Precise positioning due to flexible shafts and fine adjustment in both axes Easy to use, very well suited for beginners Focal ratio F/5, thus well suited for many celestial objects 1.25 inch (31.7 mm) focuser Two eyepieces and a barlow lens with 1.25 inch (31.7 mm) sockets for different magnifications SCOPE OF DELIVERY Telescope Stainless steel tripod Equatorial EQ3 mount Eyepieces: 10 mm and 25 mm (1.25 inch sockets) Barlow lens 3x (1.25 inch socket) LED illuminated dot finder Accessory tray Astronomy software download Instruction manual

BRESSER 20mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 20 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack