LUNT LS2HW 50.8mm (2'') Herschel-wedge

​​Modular designed multipurpose telescope, both for observing the sun in the H-alpha wavelength, as well as for night sky observations. Easy conversion between the different applications with a few simple steps. 3-lens apochromatic telescope with FPL-53 glass, 100mm aperture and 714mm focal length - excellent image quality for H-Alpha solar observation and also for observing the starry sky at night. With innovative air pressure tuning system, good 2 inch (50.8mm) R&P focuser, and B1800 blocking filter. Solar observing in H-alpha: The LS100MT/B1800 is a complete telescope for observing the sun in H-alpha light, with 100mm free aperture (no central obstruction) and 714mm focal length. The H-alpha wavelength is the most impressive way to observe the sun, showing protuberances at the sun's edge, filaments and flares on the surface, and much more. An internal Etalon filter achieves a bandwidth of <0.7 Angstrom with the innovative air pressure tuning system Pressure-Tuner. Tuning is done by slightly changing the air pressure in a pressure chamber inside the telescope. This changes the refractive index of the air, making it easy to tune to the H-alpha line. The pressure tuner guarantees a homogeneous image, without central obstruction, and a permanently protected Etalon without erosion. A set of collimating lenses installed in the telescope ensures best performance. Fine adjustment is achieved with a solid 2 inch R&P focuser with 10:1 reduction. Blocking-filter is the B1800. The B1800 is very good for visual solar observing. Also solar imaging is possible by cameras with small to large sensor chip. We recommend a LS100MT with B3400 blocking-filter by using cameras with very large sensor chips. The star diagonal in which the blocking filter is installed, is equipped as standard for 1.25 inch eyepieces and with a T2 camera connection. Observing the starry night sky: The H-Alpha Etalon system can be removed from the telescope in a few easy steps thanks to its modular design. With the additionally available conversion kit (item number 0551430) the 3-lens apochromatic refractor can then be used as a normal telescope with 100mm aperture and 714mm focal length for observation and photography of the night sky. The FPL-53 triplet lens offers an outstandingly low colour aberration image. Common 2 inch star diagonals can be used at the high quality R&P focuser of the conversion kit 0551430. Please note that the optionally available conversion kit 0551430 is absolutely necessary if the telescope should be used at night. More applications: With additionally available accessories the LS100MT offers even more possibilities! - Double-Stack The LS100MT telescope can optionally be upgraded with the additionally available double-stack module DSII/SFPT (item number 0551395). The DSII system is a internal double-stack module. Thereby a bandwidth of <0.5 Angstrom is achieved for H-alpha solar observation. Therefore much more details on the solar surface will become visible. - Solar observing in White-Light If the H-alpha unit has been removed, of course either a sun filter to be installed in front of the objective, or a Herschel-wedge at the focuser can be used to observe the sunspots in White-Light. - Solar observing in Ca-K wavelength Certainly, the Ca-K filter modules from Lunt Solar Systems can also be used at the LS100MT to observe and photograph super-granulation and other effects visible in this wavelength on the sun. This makes the LS100MT a completely universal usable apochromatic telescope of highest quality! FEATURES 3-lens APO refractor, FPL-53 Aperture: 100mm (no central obstruction) Focal length: 714mm Bandwidth: internal Etalon with <0.7 Angstrom Tuning: air pressure tuning system Pressure-Tuner Blocking filter: B1800 with 1.25" and T2 connection Focuser: R&P with 10:1 reduction Two tube-ring with handle Sol-Searcher installed inside handle Dovetail bar at GP-level for astronomical mounts Weight: 6.8kg Length with blocking filter and dew-shield: 84cm Length without blocking filter and removed dew-shield: 65cm SCOPE OF DELIVERY LS100MT Multipurpose Telescope Pressure-Tuner B1800 blocking filter in star-diagonal housing 2 inch R&P focuser with 10:1 reduction Tube rings with dovetail bar Transport case (78x33x23cm) Instruction manual Conversion kit for observation of the starry night sky (0551430) not included!

Single linear 2" polarizing filter.This polarizing filter can be used for example at the Lunt Solar Systems 2" White-Light Herschel-wedge (0558201).The 2" filter can also be used with the BRESSER microscopes 5804000 and 5806100 for the suppression of reflections (eg on metal components, soldering points). It is connected via the M48 thread.FEATURESLinear polarizing filterFilter mount with 2" filter thread (M48)SCOPE OF DELIVERY1x 2" polarizing filter

This Herschel wedge is designed for superior White-Light solar observing and imaging. It can be used with refracting telescopes up to 102mm aperture, with 1.25'' focuser. This complete system comes with installed ND3.0 filter.Herschel Wedges are used to observe the sun in White Light. Around 95% of the Sun's light is suppressed by the wedge's ceramic prism. The remaining sun light is dimmed further by a factory-installed ND3.0 grey filter. Lunt Solar Systems Herschel wedges are installed in a fully closed housing with integrated heat trap. No stray light can escape from this, therefore it is very safe method of observing our nearest star.The difference between Herschel-wedges and normal front mounted filters is that the filtering takes place just before the eyepiece or camera. This provides better contrast and sharpness of the solar image - with more surface detail visible as a result.  Furthermore, a Herschel wedge is inherently safer than at a front mounted filter. A Herschel wedge can not rip or become punctured like a foil filter can be and it cannot become detached from the telescope objective accidentally.Only for use with refractor telescopes up to 102mm aperture:Because the full energy and heat of the sun inside the telescope, we advise solely using refractors for Herschel-wedge use. The refractor must not have corrector lenses at the back. Optical elements like corrector lenses, or secondary mirrors of reflecting telescopes, could suffer from thermal build-up by concentrated solar energy and could be permanently damaged.Tuning the brightness:Because the Herschel-wedge produces polarised light, you can use a normal polarising filter at the eyepiece, or camera-adapter. By turning the polarising filter the image brightness can be varied to the user's liking.This additional Polarising filter is not included. We recommend the BRESSER 1.25'' polarising filter, no: 4946464.FEATURESFor refractor telescopes up to 150mm apertureConnection to telescope: 1.25''Connection to eyepiece: 1.25''90° housing like star-diagonalEspecially high-quality optical surfaces for very good contrastFully closed housing with integrated heat trapNo stray light escaping - therefore it is very safeThe needed ND3.0 filter is fix installedWHAT'S INCLUDEDHerschel-wedge for 1.25'' focuserIntegrated ND3.0 filterTransport caseInstruction manual

Lunt Solar Systems zoom-eyepiece with variable focal length from 7.2mm to 21.5mm, with 1.25 inch (31.7mm) connection.The special of this zoom eyepiece is that the optical layout offers highest quality views of the sun, but also on nightsky objects. LUNT minimized the reflections by using superb multicoatings and with care designed internal baffle system and blackened lens edges. The LUNT zoom-eyepiece is not the widest field zoom-eyepiece on the market, LUNT prefered best performance over widest field. The sun and stars are perfect pin point across the entire field of view without any visible distortion. The LUNT zoom-eyepiece is almost parfocal, from one end to the other end of the zooming way you need only 0.5mm to refocuse. The LUNT zoom-eyepiece has a very nice height adjustable eyeguard to protect your eye against day light reflections and to help you to find the perfect eye position.Please note that these eyepieces are only accessories for existing solar telescopes or filters when observing the sun. Solar observation alone with these eyepieces without additional solar filters is not possible!FEATURESFocal length: 7.2mm - 21.5mm continuously adjustableBarrel size: 1.25 inch (31,7mm)Diameter: 47mmHeight: 82mmWeight: 170gEye relief: 15mmLenses / Groups: 7 lenses / 4 GroupsField of view: 53° at 7.2mm - 40° at 21.5mmSCOPE OF DELIVERYLUNT Zoom Eyepiece 7.2mm - 21.5mm