EXPLORE SCIENTIFIC 1.25" H-Alpha Nebula Filter 7nm

The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)

Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light. FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0 SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)

Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed.  FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone

With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely. When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass. With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows. FEATURES complete set for safe cleaning of camera lenses bellows for removing coarse dirt particles and fluff without scratching the lens lint-free microfibre cloth approx. 14,5x14,5cm lens cleaning pencil for safe cleaning of optical and coated glass SCOPE OF DELIVERY 1x bellows 1x lens cleaning pen 1x microfiber cloth

Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon

BRESSER Viewfinder Holder 6x30 for Messier Telescopes Category: Spare Part for Messier Telescope Series Description: The sturdy Viewfinder Holder 6x30 made of plastic ensures stable hold and precise alignment of the viewfinder for Messier Telescopes. Easy mounting and adjustment make it an essential accessory. With an integrated aiming hole for easier finding of the sun (solar filter for finder and telescope optics required!). Compatible with the BRESSER Messier Telescope series (not compatible with AR90/500 & AR 90/900).

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual

Please note that this astronomy book for beginners is only available in German.

​The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting

300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft

For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions

BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm) Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price. All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available. All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces. FEATURES Focal length: 10 mm Field of view: 50° Lens-Design: 4 lenses in 2 groups , fully-multicoated Housing material: completely made from metal Rubber eyecup: YES, foldable Filter thread: YES Storage: Twist-pack SCOPE OF DELIVERY BRESSER Plössl eyepiece with rubber eyecup Twist-pack