Filter
–
3D Print
The Bresser PLA filament material is manufactured with a diameter tolerance of ± 0.2 mm as standard, which allows the use not only for the Bresser 3D printer but also for any third party printer supporting PLA material with a 1.75 mm diameter.
Already during the production the material is monitored for the smallest impurities and therefore you always get the same consistent quality results.
Basic colours: blue, green, black, red, white, neutral.
For optimal processing of the PLA material during printing, we recommend an extruder processing temperature between 190 and 220 degrees C. The optimum printing speed is between 60 and 90 mm/s. We recommend heating the building platform to 40-50 degrees.
Please make sure that the printer fan is working properly and that the appropriate cleaning filter is accurately installed. Create a large variety of different looking objects using our BRESESR PLA filament materials.Properties of PLA: Biodegradable low melting point odourless Scope of delivery: 1 kg PLA Filament in your chosen colour
The BRESSER SILK PLA filament has a silk shimmer for a glossy shine. It boasts great optics and excellent quality: for consistently high-quality print results, even the most minor of impurities is rectified during the manufacturing process. In addition, with its diameter tolerance of ± 0.2 mm, the filament is suitable for use in BRESSER 3D printers and other devices that support PLA material with a 1.75 mm diameter. This filament gives you the beneficial properties of PLA: it is biodegradable, odour-neutral and has a low melting point.
Our recommendations for optimising your printing:
For the SILK PLA filament to work its best during 3D printing, the extruder processing temperature must be between 200 and 250 degrees Celsius. The printing speed should be between 60 and 90 mm/s. We also recommend heating the construction platform to between 40 and 50 degrees Celsius.
Please ensure that the printer’s fan is working correctly and that the appropriate cleaning filter is correctly inserted.
FEATURES
Wide range of colours for different 3D artwork
Suitable for all 3D printers that support PLA material with a 1.75 mm diameter
SCOPE OF DELIVERY
SILK PLA filament fir 3D printers
Variants from £6.99*
The Bresser PLA Filament material is manufactured with a diameter tolerance of ± 0.05 mm, which not only makes it usable for the Bresser 3D printers but also non Bresser brands which support filament diameters of 1.75mm.Dirt particles are carefully removed during the production stage, always giving you the same results in our PLA filaments.Available colours are: black, white, red, blue, green, neutralWe recommend a extruder print temperature of 190 to 220 degrees in order to properly utilize the PLA filament. The optimum print speed should be set between 60 to 90 mm/s, while we recommend the building plate to be heated to 40-50 degrees C. PLA Features:biodegradable, low melting point, odourlessFEATURES:The selection of different colours allow you to create various 3D pieces of art.SCOPE OF DELIVERY:PLA Filament
%
The BRESSER Replacement HEPA air filter for the BRESSER 3D printer 2010100, as well as compatible for the Flashforge Adventurer 3.