Product information "BRESSER Solar filter 138.2mm for carbon-look telescopes"
Original BRESSER objective lens solar filter for safe solar observation in the white light spectrum.
Shows a pleasant solar image in yellow/orange and allows the observation of sunspots, eclipses and planetary transits. The solar filter can easily be inserted into the telescope opening. Suitable for tube inner diameters of approx. 83.2mm. Suitable for the BRESSER Carbon Look telescopes 4630100 Spica and 9430110 Spica as a spare part or as an extension of the existing accessories.
IMPORTANT NOTE: Never observe the sun without a suitable protective filter!
Embark on a voyage of discovery through our solar system and beyond using the BRESSER Spica-II reflector telescope. You can start straight away with your new hobby, because this complete astronomy set already comes with everything you need for exciting observations: an astronomical reflector telescope with 130 mm aperture and 1000 mm focal length, an equatorial mount, a tripod and extensive accessories. Perfect for the astro-novice: the system is very easy to use. So look forward to fascinating sights especially of the Moon, the planets and the Sun.
Perfect combination of mirror and lens – the telescope
Using the Spica-II you’ll start your celestial exploration tour with a classic reflecting telescope of the "Newton" type with an additional lens inside the focuser. This combination of mirror and lens is called "catadioptric". It’s immediately noticeable with this type of telescope that you do not look in at the back, but at the front and laterally. What is the advantage? Even if the telescope is pointed vertically into the sky, you can observe the beauties of the night sky in a comfortable posture. In addition, catadioptric telescopes impress with their transportability, because despite the long focal length, the tube is comparatively short.
With its 130 mm aperture, the Spica-II already collects a lot of light from celestial objects. In addition, 130 mm aperture and 1000 mm focal length result in a focal ratio (ratio of aperture to focal length) of 1 to 7.7 (F/7.7). This means you can enjoy an image with good contrast even at high magnifications. Thus, the telescope is well suited for observing the planets and details on the Moon. Even some deep sky objects are worth looking at through this entry-level telescope: admire open star clusters and globular clusters as well as bright so-called planetary nebulae such as the Ring Nebula M57 in the constellation Lyra.
And how big will the nocturnal highlights appear? The 130 mm aperture achieves a resolution that allows magnifications of up to about 260x with sharp images. Technically, even more is possible – theoretically up to 750x with the included accessories. However, as the magnification increases, the sharpness of the image may slowly decrease. In addition, as is so often the case in astronomy, you are also dependent on the prevailing conditions. For example, the air turbulence in the atmosphere (seeing conditions) always plays a role in your magnification possibilities.
Note for nature lovers:
If you choose a Newtonian telescope like the Spica-II reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes.
A good foundation for your astro-start – mount and tripod
If you want to look up at the sky, you need a solid base on the ground. That's why you will find a robust height-adjustable aluminium tripod and an equatorial mount in your telescope set. The special advantage of this type of mount: unlike an azimuthal model, the movement of the celestial bodies is compensated for only on one axis instead of two. For this purpose, one axis of the equatorial mount is aligned parallel to the Earth's axis in the course of the so-called "alignment". This is easily done by pointing it approximately at Polaris. Perfect for convenient adjustment and tracking of the entry-level telescope: the axes can be moved precisely via the two flexible shafts with fine adjustment. And if you simply place smartphone adapter, eyepieces etc. on the convenient storage plate between the tripod legs, you will have the equipment you need quickly at hand.Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable!
Everything for the astro-beginner – the accessoriesFor your start into the wonderful world of astronomy, the Spica-II beginner's telescope comes with lots of accessories. The LED viewfinder, for example, is great for orientation in the night sky. You simply install the direction finder parallel to the actual telescope. It projects a red dot onto a small ground-glass screen that appears to float in front of the sky when you look through it. In this way, it shows you where the telescope is pointing. A great help for the exact alignment of the telescope and the easy location of celestial objects before you gaze at them with higher magnifications.
You determine how detailed you observe your discoveries by using one of the two eyepieces, each of which provides a different magnification. They are fitted with standard 1.25-inch (31.7 mm) diameter sockets which allow them to be easily inserted into the eyepiece focuser of the entry-level telescope. Would you like to look even closer? Then grab the 3x barlow lens, which triples the magnification of the eyepieces in no time.
Explore the astronomical highlight of the daytime sky: With the safe solar filter you can examine sunspots as well as granulation on the Sun.
CAUTION: Never point the telescope at the Sun without the solar filter!
There is also a suitable accessory for your first steps in astrophotography: with the smartphone adapter, you can use your mobile phone as a camera on the telescope. First snapshots of the Moon or Sun made easy!
FEATURES
Reflector telescope with 130 mm aperture and 1000 mm focal length
Reflector type catadioptric
Well suited for observing the Sun, Moon and planets
Height-adjustable tripod with equatorial EQ3 mount
Precise adjustment through flexible shafts and fine adjustment in both axes
Easy to use, very good for beginners
Focal ratio F/7.7, therefore good for observing the planets and details on the Moon
1.25-inch focuser (31.7 mm)
Two eyepieces and one barlow lens with 1.25-inch (31.7 mm) sockets for different magnifications
Safe solar observation with the included solar filter
First steps in astrophotography with smartphone camera adapter
SCOPE OF DELIVERY
Telescope
Aluminium tripod
Equatorial EQ3 mount
Eyepieces: 4 mm and 20 mm (1.25-inch sockets)
Barlow lens 3x (1.25-inch socket)
LED illuminated viewfinder
Solar filter
Smartphone camera adapter
Accessory tray
Astronomy software as download
Instruction manual
Featuring a large mirror with a high focal length, this telescope allows you to observe a wide range of night sky objects. Thanks to the catadioptric system (integrated Barlow lens), the tube has a short design-despite the high focal length-making the telescope highly portable. The BRESSER Spica Plus also comes with high-performance mechanics, including a premium equatorial mount that allows you to set up the telescope in no time. A focuser is attached to the side of the tube, as is standard on a Newtonian reflector telescope. It comes with two eyepieces for observing at different magnifications. Explore the planets of our solar system and discover new worlds. And if youd like to capture your observations to share with others, you can take photos through the telescope using the supplied smartphone camera adapter.
Please note that Newtonian reflecting telescopes are ideal for astronomical observations, but are not suitable for observing wildlife and landscapes. For observing wildlife and landscapes, we recommend BRESSER refracting telescopes.FEATURESTelescope for observing the night sky and the sunOptical system: Newton reflectorMax. useful magnification: 260xLens diameter: 130 mm Focal length: 1000 mm Aperture ratio: f/7.7Mount: Equatorial mountEyepiece diameter: 31.7 mm (1.25) DELIVERY CONTENTTelescope with mountLens sun filterMoon and planet filter set (4 pcs)Eyepieces: 4 mm, 20 mmLED finder scope3x Barlow lensSmartphone cameraAluminium tripod Accessory trayAstro R-Lite torch
The ASTRO R-LITE red light flashlight is the ideal companion at night to read star charts or make adjustments to the equipment without losing the dark adaptation of the eyes. The ASTRO R-LITE offers 3 functions: Continuous light bright / Continuous light dark / Flashing. The large diffusing lens results in a very large and evenly illuminated light cone, which can also be adjusted by a sliding mechanism. By using a power-saving LED lamp, the battery life (1 x AA-LR6) is up to 100 hours. Of course, the robust lamp housing made of aluminium is splash-proof according to IPX4 and therefore particularly well suited for outdoor applications. The side cutouts on the front of the ASTRO R-LITE provide a 360° signal function. The 50 cm long carrying strap with quick coupling and an extra belt clip included in the scope of delivery ensure that the flashlight is always quickly at hand. The ASTRO R-LITE should not be missing in any equipment. FEATURES ASTRO R-LITE Red Light Flashlight Reading star maps at night Dark adaptation of the eyes is retained Continuous light bright / Continuous light dark / Flashing 360° signal function Large diffusing lens produces a uniformly illuminated light cone Carrying strap and belt clip included Battery life up to 100 hours - Battery (1 x AA-LR6) Splash-proof according to IPX4Robust lamp housing made of aluminiumSCOPE OF DELIVERYASTRO R-LITE Red Light Flashlight Carrying strap Belt clip Battery (1 x AA-LR6)
Save pictures and videos from your microscope or telescope directly in Full HD resolution on your PC. The BRESSER MikrOkular Full HD is an eyepiece camera that can be used directly instead of the eyepiece of your telescope or microscope. Adapters for various devices (all common eyepiece dimensions from different manufacturers) and multilingual recording software for Windows are already included in the scope of delivery. With this camera you can document your microscope or telescope observation or share it with others. Ideal for hobby, school, study and work. The camera can take pictures of the moon and the bright planets on the telescope. In microscopy, the camera is mainly used for shooting in brightfield and incident light.
FEATURESmetal housing, mini USB socketresolution 1920 x 1080 Pixel, Full HDPixel size: 3x3 µm, sensor size: 5.86 x 3.28 mm23,2mm barrel, integrated UV/IR blocking filter30mm; 30,5mm adapter for various microscopes and telescopes included31,7mm (1,25") adapter for telescopes includes with thread for 1,25" filtersmultilingual recording software for Windowsimage format jpg, bmp, tif, pngvideo format avi
SYSTEM REQUIREMENTSWindows 10 or 11Intel i3, i5, i7 or i9 CPU from the 2nd generation orAMD FX or Ryzen CPUinternet connection for software downloadUSB 2.0
SCOPE OF DELIVERYcamera module incl. dust capUSB-cableCamLabLite-Software as a download link, language versions German, English, French, Turkish, Russian, Polish, Indonesian, ChineseUsers Guide included in the software (German, English)Adapters 30mm, 30,5mm, 31,7mm (1,25”)
Take pictures with your smartphone through the telescope or microskope? With the Smartphone camera adapter this is now child's play! Simply screw the adapter to the eyepiece and use your smartphone as a camera with a super-telephoto / super-macrophoto lens. It lets you take pictures of distant objects or very small objects as if you were very close.The Deluxe version offers an even more comfortable and secure attachment to the eyepiece. By a rotary movement of the clamping ring 3 clamping jaws are evenly applied to the eyepiece housing and the Smartphone adapter sits firmly and centrically on the eyepiece. The fine adjustment of the height of the smartphone support allows a quick and precise adjustment of the viewing height of the smartphone camera above the eyepiece lens. Good image results are thus guaranteed. FEATURES Take photos through the telescope Smartphone camera with super telephoto lens Fine Height adjustment of phone support Wide adjustment range for eyepiece housing diameter Fits 31.7mm (1.25") eyepieces For eyepiece housing diameters from 22-38mm SCOPE OF DELIVERY Smartphone holder deluxeLocking ring for the smartphone
With the 3-piece lens cleaning set you not only clean camera or binocular lenses, but also spectacles glasses and displays and screens of smartphones, laptops, tablets, etc. thoroughly and safely.
When cleaning high quality optical lenses, you have to be very careful. After all, it would be very annoying to successfully remove the dust but leave a scratch behind. With the lens cleaning pen you can safely clean optical and coated glass.
With the brush on one side you can remove coarser dirt before polishing the lenses with the other side. Just blow away fluff with the bellows.
FEATURES
complete set for safe cleaning of camera lenses
bellows for removing coarse dirt particles and fluff without scratching the lens
lint-free microfibre cloth approx. 14,5x14,5cm
lens cleaning pencil for safe cleaning of optical and coated glass
SCOPE OF DELIVERY
1x bellows
1x lens cleaning pen
1x microfiber cloth
Connect your BRESSER Microscope or Telescope with a Nikon SLR camera and take images or videos of your observed object!The BRESSER T-Mount is the connecting piece between the camera adapter and SLR camera. To find out what T2-ring you need, look into the instruction manual of your camera.FEATURESConnecting piece between the camera adapter and Nikon SLR cameraHigh-quality and precise workmanship made of metalA corresponding camera adapter is neededSCOPE OF DELIVERYT2 Ring Nikon
BRESSER Viewfinder Holder 6x30 for Messier Telescopes Category: Spare Part
for Messier Telescope Series Description: The sturdy Viewfinder Holder 6x30 made of plastic ensures stable hold and precise alignment of the viewfinder for Messier Telescopes. Easy mounting and adjustment make it an essential accessory. With an integrated aiming hole for easier finding of the sun (solar filter for finder and telescope optics required!). Compatible with the BRESSER Messier Telescope series (not compatible with AR90/500 & AR 90/900).
Self-sufficient travel with the BRESSER solar charger
Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid!
Simply open it up, put it down and immediately produce green solar powerThe handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately.
Which devices can the solar panel charge?
The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070.Universal charger with flexible connection optionsOne USB-A connection socket is available for powering your devices. There is also an additional universal connection socket for DC bar plugs with a diameter of 5.5/2.1 mm. A universal connection cable with a 5.5/2.1mm DC bar plug on both sides and a length of 2 metres, as well as 3 plug adapters (3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-).
How long does it take to charge a battery?Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full.Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge.Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration.Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 2400mA (2.4 amps). So 3000 : 2400 x 75 = 94 minutes. Dividing the result by 60 gives the charging time in hours: 1.6 hours.This means that an average smartphone can be fully charged in just about 1.6 hours with a 21-watt solar panel.
Carabiner hook for attachment included
In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. If you attach it to your backpack, you can even use the time during a hike for charging.
Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design.Easy transportThanks to the modern and flat design, you can easily fold the individual segments of the solar panel into a small bag and stow it in your luggage while saving space. Always ready for the next spontaneous use.Robust, dust- and water-repellent materials The durable Cordura fabric is extremely tear-resistant but still flexible. It protects the valuable solar panel from damage and provides the necessary stability during use. The solar panel is dust- and water-repellent, it withstands most weather conditions and is your ideal companion for almost all outdoor activities. Nevertheless, the solar panel should not be exposed to direct rain or extreme humidity.IMPORTANT NOTESThe solar panel does not have an integrated charger or charge controller. Therefore, it is not suitable for directly charging loose battery cells or lead batteries. It is only suitable for smartphones, tablets and power banks, for example, because they always have built-in internal chargers.The solar panel does not have its own battery, but serves exclusively as a power source in sunshine for charging electronic devices.When connecting the devices to be charged via the DC bar plug, always ensure the required voltage and correct polarity. Otherwise, damage may occur to the electronics of the solar panel and the devices to be charged.Do not leave the solar panel outdoors at night with high humidity or in the rain. This could damage the internal electronics. FEATURESSolar panel with output power of max. 21 wattsSolar panel for charging battery-powered devicesSuitable for smartphones, tablets and power banks etc.Simply unfold, point towards the sun and the charging startsStay independent even without a 230-volt socketFree electricity through solar energyNo emissions and zero noiseConnection via USB A and DC hollow plug with adaptersMonocrystalline silicium cells with high efficiencyEnables high charging currents and short charging timesCompact transport dimensions due to foldable designRobust, dust- and water-repellent materials Ideal for all outdoor activitiesSPECIFICATIONSOutput power of the solar panel: 21 wattsOutput voltage at the DC socket: 18 voltsOutput current at the DC socket: max. 1.1 ampsOutput voltage at the USB A socket: 5 voltsOutput current at the USB A socket: max. 2.4 ampsCable length of the DC connection cable: 2.0 metresDC plug adapters: 3.5/1.35mm, 5.5/2.5mm, 8.0/5.5/0.8mmPolarity of DC connectors: inner contact = positive (+), outer contact = negative (-)Transport dimensions when folded: 290 x 195 x 35 mmDimensions when unfolded: 815 x 290 x 20 mmWeight: 1,0 kgSCOPE OF DELIVERYSolar panel 21 Watt (1 piece)Carabiner hook (2 pieces)DC connection cable (1 piece)Plug adapter (3 pieces)User manual
300 mm adjustment shaft with flexible design for comfortable observations with the Porta II and the Mini Porta.The large adjustment knobs allow you to make smooth, fine adjustments to the axles.Also compatible with a wide range of other mounts from other manufacturers.FEATURESComfortable tracking by handLarge adjustment knobs for fine tuningDesigned for wide range of mountsLength: 300 mmDELIVERY CONTENT300 mm adjustment shaft
BRESSER 10mm Plössl Eyepiece 1,25" (31,7mm)
Since years a well known and approved Plössl eyepiece. Ideal to improve the performance of your telescopes for a low budget price.
All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently. Every eyepiece is equipped with a foldable rubber eyecup to avoid straylight from the sides and the inner eyepiece shaft is carefully blackened as well. Housing and eyepiece shaft are completely made from metal - no plastic is used. Filter thread for use with colour- and nebular filters is also available.
All these Plössl eyepieces offer a much better image quality than all the very simple made Kellner and Huygens eyepieces.
FEATURES
Focal length: 10 mm
Field of view: 50°
Lens-Design: 4 lenses in 2 groups , fully-multicoated
Housing material: completely made from metal
Rubber eyecup: YES, foldable
Filter thread: YES
Storage: Twist-pack
SCOPE OF DELIVERY
BRESSER Plössl eyepiece with rubber eyecup
Twist-pack
The EXPLORE SCIENTIFIC Hybrid Finder Scope Base is designed to accept all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope brackets and mini dovetail-type (e.g. Vixen, Synta, and many other brands) finder scope brackets. The base has rugged all-metal parts with black-anodized base and chrome-plated metal screws. Safety stops prevent the finder scope from sliding through and from falling when attaching screws are loosened. There are threaded holes on the left and right sides of the EXPLORE SCIENTIFIC Hybrid Finder Scope Base for desired access to attaching screws. Includes bolts and screws for mounting the base to the optical tube assembly. Direct replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopes, allowing the use of a wide range of other-brand finder scope options.FEATURESDirect replacement for all EXPLORE SCIENTIFIC and BRESSER Messier telescopesAccepts all legacy EXPLORE SCIENTIFIC and BRESSER Messier finder scope bracketsAccepts also mini dovetail-type fittings from e.g. Vixen, Synta and many other manufacturersRugged all-metal parts with black-anodized baseIntegrated safety stopsIncludes bolts and screws for mounting the baseBolt hole spacing 32.5mm for mounting on telescope tubeSuitable for screw diameter M4/M5 SCOPE OF DELIEVERYHybrid Finder Scope BaseBolts and screws for mounting
The 2-group 4-element Plossl optical design of the NPL series eyepieces delivers flat and clear images with good color correction. The lenses are fully multi-coated for high light transmission.
FEATURES
Push-fit Size: 31.7 mm
Apparent field of view: 50°
Eye relief: 4.5 mm
Weight: 79 g
WHAT'S INCLUDED
1x Eyepiece 8 mm (1.25'')
For remote control of a BRESSER MCX 102/127 Goto Telescope or a BRESSER EXOS-II EQ Goto Mount via computer cable. Navigate your telescope comfortably with navigation software and Windows 10 computer. One click on the star map on the computer and the telescope is positioned on the desired object. NOTES(This list is exemplary and not exhaustive)To control a BRESSER MCX Goto telescope, no software update of the Computer Handbox is required. A direct use is therefore possible. To control a BRESSER EXOS-II EQ Goto mount, the Computer Handbox must be updated to software version v2.3 with the help of this computer cable set. This cable set is not suitable for the EXPLORE SCIENTIFIC EXOS-2 with PMC-Eight Goto. This set does not include navigation software and computer. DOWNLOAD NAVIGATION SOFTWARE (alternatively)Sky Map Pro Demo: https://nextcloud.bresser.de/s/PnQr9gyigxp9A6zSky Map Pro ASCOM PLUG-in: http://download.ascom-standards.org/plugins/SkyMapProPlugin.zip Carte Du Ciel: https://www.ap-i.net/skychart//en/startStellarium: https://stellarium.org/de FEATURESConnects a BRESSER MCX102/127 Goto to a PC Connects a BRESSER EXOS-II Goto to a PC Comfortable control by computer USB to serial adapter included Required firmware update for EXOS-II included Compatible with WIN 10 + 11SCOPE OF DELIVERYRS-232 computer cable USB 2.0 to RS-232 adapter + driver CD-Rom Firmware v2.3 for EXOS-II Goto Handbox Flash Utility Software for Handbox Update ASCOM driver for BRESSER MCX/EXOS-II Goto Operating instructions
BRESSER Solar Filter 153mm for Messier TelescopesCategory: Spare Part for Messier Telescope SeriesDescription: The Solar Filter with a diameter of 153mm is suitable for Messier Telescopes (models 4830100 NT130, 4730107 NT130, 4716413 DOBSON 5''). It protects the eyes from harmful sunlight and is suitable for the BRESSER Messier Telescope series. Please check compatibility using the product number on your optical instrument.
Fascinating Jupiter, breathtaking Ring Nebula and glowing Pleiades – there are infinite beauties to admire in outer space. With this complete telescope set for beginners, you can explore them with your own eyes, and do so immediately. Everything is included for a quick and easy start in sky observation: the astronomical reflector telescope with 114 mm aperture and 900 mm focal length, the equatorial mount, the tripod and a wide range of astronomical accessories. In addition, the telescope can be operated very easily, even by beginners. The Galaxia is particularly suitable for observing the Moon and planets as well as star clusters and bright gas nebulae.
Getting started easily with a true astro-classic – the telescope
This set enables you to make your first astronomical discoveries through a classic reflector telescope, a so-called Newtonian reflector. For many beginners, the view through telescopes of this type is rather unusual: you don't look in at the back of the telescope, but at the front and laterally. This way you can always enjoy your observations in a comfortable physical position. Even if the telescope is pointed vertically upwards into the sky, you don’t have to bend down. Another important advantage of these reflecting telescopes: the optics are absolutely free of chromatic aberrations and thus score points with their good imaging properties.
Due to its aperture of 114 mm, the entry-level telescope already collects a lot of light from the celestial objects. In addition, 114 mm aperture and 900 mm focal length result in a large focal ratio (ratio of aperture to focal length) of 1 to 7.9 (F/7.9). As a result, you’ll enjoy a sharp image with good contrast. The combination of large aperture and long focal length makes especially Moon, Sun and planets look very impressive through this telescope. But you can also use it to observe many deep sky objects. Look forward, for example, to your first impressions of sparkling open star clusters and globular clusters. But also bright gas nebulae such as the Orion Nebula M42 or the Dumbbell Nebula M27 can already be seen with this telescope.
However, how close do the celestial bodies appear through the astronomical telescope? The resolving power of the 114 mm aperture allows for magnifications of up to 230x with sharp images. Technically even more would be possible, theoretically up to 675x using the included accessories. But as the magnification increases, the image sharpness can then slowly decrease. And another factor always determines the answer to the question of possible magnification: the air turbulence in the atmosphere (seeing conditions).
Note for nature lovers:
If you choose a Newtonian telescope like the Galaxia reflector telescope, you can look forward to a specialist in astronomical observation. However, the image is always displayed laterally reversed as well as upside down, which makes no difference when observing the sky. However, this type of telescope is less suitable for nature and landscape observation during the day. Would you like to use your new telescope for exciting nature discoveries as well? Then we recommend that you choose one of the BRESSER refractor telescopes.
Perfect foundation for stargazing newbies – mount and tripod
You found the ideal place for your start in astronomy? Then go ahead and mount the beginner's telescope on the equatorial mount and the height-adjustable aluminium tripod. This type of mount has a special advantage over azimuthal models: the movement of the celestial bodies is tracked on just one axis instead of two. To do this, you align one axis parallel to the Earth's axis beforehand. This so-called "alignment" is easily done: you simply point the axis approximately to Polaris. Another advantage of this particular mount is that you move the axes via two flexible shafts with fine adjustment. Perfect for comfortable and sensitive adjustment and tracking of your telescope. Always at hand: The extensive accessories can be stored on the shelf between the tripod legs.
Keep track of things automatically: For this telescope’s equatorial EQ-3 mount, the tracking motor with item number 4951400 is available as an optional accessory. This eliminates the need to manually track a celestial object set in the telescope. When this motor is installed at the mount, it automatically tracks the celestial object, keeping it in the field of view of the eyepiece. This makes observing the night sky even more comfortable!
Everything you need for your new hobby – the accessories
Since the telescope kit comes with an extensive range of accessories, you are perfectly equipped for your first steps in the fascinating world of astronomy. Simply install the LED viewfinder parallel to the tube, adjust it and look through. As you do so, you will see a red dot projected onto a small ground-glass screen inside the viewfinder. It appears to hover in front of the sky at the exact spot where the telescope is pointed. This helps you to find celestial objects and the exact telescope alignment more easily.
Simply change your perspective – with the two eyepieces you can marvel at your favourite astronomical objects in different magnifications. They are easily inserted into the telescope's focuser using the sockets, which have the standard diameter of 1.25 inch (31.7 mm). Do you want an even more detailed view? Then simply triple the magnification of the eyepieces using the 3x barlow lens.
Astronomical observations are well worthwhile even during the day: enjoy a safe view of sunspots and granulation on our own star with the solar filter.
CAUTION: Never point the telescope at the sun without the solar filter!
Take your first photos of the Moon or the Sun, and do it easily: the smartphone adapter enables you to attach your smartphone camera to the telescope and soon enjoy your very own astronomical snapshots.
FEATURES
Reflector telescope with 114 mm aperture and 900 mm focal length
Reflector type Newton
Well suited for observing Sun, Moon and planets, also star clusters and gas nebulae are visible
Height-adjustable tripod with equatorial EQ3 mount
Sensitive adjustment through flexible shafts and fine adjustment in both axes
Easy to use, very suitable for beginners
Focal ratio F/7.9, thus sharp image and good contrast
1,25 inch (31,7 mm) eyepiece focuser
Two eyepieces and one barlow lens with 1.25 inch (31.7 mm) extension tubes for different magnifications
Safe solar observation with the included solar filter
Easy first steps into astrophotography with smartphone camera adapter
SCOPE OF DELIVERY
Telescope
Aluminium tripod
Equatorial EQ3 mount
Eyepieces: 4 mm and 20 mm (1.25 inch sockets)
Barlow lens 3x (1.25 inch socket)
LED illuminated dot finder
Solar filter
Smartphone camera adapter
Accessory tray
Astronomy software download
Instruction manual
Original BRESSER objective lens solar filter for safe solar observation in the white light spectrum. Shows a pleasant solar image in yellow/orange and allows the observation of sunspots, eclipses and planetary transits. The solar filter can easily be inserted into the telescope opening. Suitable for tube inner diameters of approx. 83.2mm. Suitable for the BRESSER Carbon Look telescopes 4512001 Sirius, 4511759 Stellar and 4511609 Arcturus as a spare part or as an extension of the existing accessories. IMPORTANT NOTE: Never observe the sun without a suitable protective filter! SCOPE OF DELIVERYLens solar filter (1 Piece)
£19.00*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Amazon Pay
Machine identifier:
Security token to identify the machine.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
Stripe csrf:
CSRF token.
PayPal payments
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Payment provider (Stripe) session
Timezone:
The cookie is used to provide the system with the user's current time zone.
CAPTCHA integration
Payment provider (Stripe) session
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Payment provider (Stripe) fraud prevention
Payment provider (Stripe) fraud prevention
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Google Tag Manager debug mode:
Allows to run the Google Tag Manager in debug mode.
Mollie Payment:
This cookie is used to group all events generated from a unique user session across multiple checkout pages.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
YouTube video
Location maps:
We use OpenStreetMap as tile provider to show you visually the location of our stores and merchants.
Recently viewed products:
The cookie stores the most recently viewed products in order to suggest them on further product pages.
Wishlist
Customers also viewed:
The cookie stores the most recently viewed products in order to suggest them to other customers on product pages.
Cookies used for statistics and shop performance metrics.
Conversion and usertracking via Google Tag Manager
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
Matomo:
The cookie is used to track website activity. The information collected is used for site analysis and to generate statistics.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Advertising
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Facebook Pixel:
The cookie is used by Facebook to display personalized advertising offers based on user behavior to users of websites that integrate Facebook services.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.